From 7d2fd7d59070f5b3bf93b3e19ef00865546ee23d Mon Sep 17 00:00:00 2001 From: Shiji Yang Date: Sun, 1 Jun 2025 12:35:22 +0800 Subject: [PATCH] ipq806x: add PCIe bridge node reference labels for ipq8064.dtsi Add bridge node labels so that we can insert PCIe peripheral nodes. Signed-off-by: Shiji Yang Link: https://github.com/openwrt/openwrt/pull/18989 Signed-off-by: Christian Marangi --- ...8064-add-reference-labels-for-PCIe-b.patch | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 target/linux/ipq806x/patches-6.12/700-ARM-dts-qcom-ipq8064-add-reference-labels-for-PCIe-b.patch diff --git a/target/linux/ipq806x/patches-6.12/700-ARM-dts-qcom-ipq8064-add-reference-labels-for-PCIe-b.patch b/target/linux/ipq806x/patches-6.12/700-ARM-dts-qcom-ipq8064-add-reference-labels-for-PCIe-b.patch new file mode 100644 index 0000000000..acd5cec60c --- /dev/null +++ b/target/linux/ipq806x/patches-6.12/700-ARM-dts-qcom-ipq8064-add-reference-labels-for-PCIe-b.patch @@ -0,0 +1,41 @@ +From: Shiji Yang +Date: Sun, 1 Jun 2025 11:56:05 +0800 +Subject: [PATCH] ARM: dts: qcom: ipq8064: add reference labels for PCIe bridge + +Some devices have ath10k PCIe peripherals. Add node labels so that +the bridge node can be referenced. + +Signed-off-by: Shiji Yang +--- + arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi | 6 +++--- + 1 file changed, 3 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +@@ -1257,7 +1257,7 @@ + status = "disabled"; + perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; + +- pcie@0 { ++ pcie_bridge0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; +@@ -1318,7 +1318,7 @@ + status = "disabled"; + perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; + +- pcie@0 { ++ pcie_bridge1: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; +@@ -1379,7 +1379,7 @@ + status = "disabled"; + perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>; + +- pcie@0 { ++ pcie_bridge2: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; -- 2.30.2