From 2f04502c4329d63e65efb83f08bb7f0dadb724ff Mon Sep 17 00:00:00 2001 From: Jo-Philipp Wich Date: Tue, 5 Apr 2016 23:24:46 +0200 Subject: [PATCH] Fix table column widths, some markup fixes Signed-off-by: Jo-Philipp Wich --- docs/uci_dnsmasq.txt | 10 +++--- docs/uci_dropbear.txt | 2 +- docs/uci_firewall.txt | 14 ++++---- docs/uci_net.txt | 84 +++++++++++++++++++++---------------------- docs/uci_system.txt | 26 +++++++------- 5 files changed, 68 insertions(+), 68 deletions(-) diff --git a/docs/uci_dnsmasq.txt b/docs/uci_dnsmasq.txt index b2d3f44..2c3ec00 100644 --- a/docs/uci_dnsmasq.txt +++ b/docs/uci_dnsmasq.txt @@ -41,7 +41,7 @@ config 'dnsmasq' * Options "enable_tftp" and "tftp_root" turn on the TFTP server and serve files from tftp_root. You may need to set the server's IP on the client. On the client, change it by setting "serverip" (e.g. "setenv serverip 192.168.1.10"). === All Options -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Default | Option | Description | 'add_local_domain' | boolean | '1' | | Add the local domain as search directive in resolv.conf. @@ -117,7 +117,7 @@ config 'dhcp' 'lan' Below is a listing of legal options for 'dhcp' sections. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'dhcp_option' | list of strings | no | _(none)_ | The ID dhcp_option here must be with written with an underscore. OpenWrt will translate this to --dhcp-option, with a hyphen, as ultimately used by dnsmasq. Multiple option values can be given for this _network-id_, with a a space between them and the total string between "". E.g. '26,1470' or 'option:mtu, 1470' that can assign an MTU per DHCP. Your client must accept MTU by DHCP for this to work. Or "3,192.168.1.1 6,192.168.1.1" to give out gateway and dns server addresses. @@ -163,7 +163,7 @@ config host ---- This adds the fixed IP address 192.168.1.3 and the name "mylaptop" for a machine with the (Ethernet) hardware address 11:22:33:44:55:66 or aa:bb:cc:dd:ee:ff. Note that this is **unreliable** if more than one of the listed mac addresses is on the network simultaneously. It's useful for cases such as a laptop with both wireless and wired interfaces, provided that only one will be active at a given time. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ip' | string | yes | _(none)_ | 'ignore' or the IP address to be used for this host. @@ -212,7 +212,7 @@ config boot linux list dhcp_option 'option:root-path,192.168.1.2:/data/netboot/root' ---- This tells the client to load pxelinux.0 from the server at 192.168.1.2, and mount root from /data/netboot/root on the same server. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'dhcp_option' | list of strings | no | _(none)_ | Additional options to be added for this network-id. CAUTION: If you specify this, you also need to specify the network-id. @@ -239,7 +239,7 @@ config _classifier_ ---- The placeholder '_classifier_' can be one of these values: -[options="header"] +[cols="1,4",options="header"] |==== | Classifier | Description | 'mac' | Hardware address of the client diff --git a/docs/uci_dropbear.txt b/docs/uci_dropbear.txt index 532828f..fb6f844 100644 --- a/docs/uci_dropbear.txt +++ b/docs/uci_dropbear.txt @@ -11,7 +11,7 @@ The 'dropbear' configuration contains settings for the dropbear SSH server in a The 'dropbear' section contains these settings: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'enable' | boolean | no | 1 | Set to '0' to disable starting dropbear at system boot. diff --git a/docs/uci_firewall.txt b/docs/uci_firewall.txt index 47d7738..30c355c 100644 --- a/docs/uci_firewall.txt +++ b/docs/uci_firewall.txt @@ -27,7 +27,7 @@ A minimal firewall configuration for a router usually consists of one _defaults_ The 'defaults' section declares global firewall settings which do not belong to specific zones. The following options are defined within this section: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'input' | string | no | 'REJECT' | Set policy for the 'INPUT' chain of the 'filter' table. @@ -58,7 +58,7 @@ A 'zone' section groups one or more _interfaces_ and serves as a _source_ or _de The options below are defined within 'zone' sections: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'name' | zone name | yes | _(none)_ | Unique zone name. 11 characters is the maximum working firewall zone name length. @@ -87,7 +87,7 @@ The 'forwarding' sections control the traffic flow between _zones_ and may enabl Below is a listing of allowed option within _forwardings_: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'src' | zone name | yes | _(none)_ | Specifies the traffic _source zone_. Must refer to one of the defined _zone names_ @@ -109,7 +109,7 @@ Port ranges are specified as 'start:stop', for instance '6666:6670'. This is si The options below are valid for _redirects_: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'src' | zone name | yes for 'DNAT' target | _(none)_ | Specifies the traffic _source zone_. Must refer to one of the defined _zone names_. For typical port forwards this usually is 'wan' @@ -159,7 +159,7 @@ Port ranges are specified as 'start:stop', for instance '6666:6670'. This is sim Valid options for this section are: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'src' | zone name | yes (CAUTION: optional since Firewall v2, version 58 and above) | _(none)_ | Specifies the traffic _source zone_. Must refer to one of the defined _zone names_. @@ -212,7 +212,7 @@ It is possible to include custom firewall scripts by specifying one or more 'inc There is only one possible parameter for _includes_: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'enabled' | boolean | no | '1' | Allows to disable the corresponding include without having to delete the section @@ -234,7 +234,7 @@ huge address or port lists without the need for creating one rule per item to ma The following options are defined for _ipsets_: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'enabled' | boolean | no | '1' | Allows to disable the declaration fo the ipset without the need to delete the section. diff --git a/docs/uci_net.txt b/docs/uci_net.txt index 11afb4b..4fc4228 100644 --- a/docs/uci_net.txt +++ b/docs/uci_net.txt @@ -1,12 +1,12 @@ Network configuration ===================== -The central network configuration is located in the file '/etc/config/network'. This configuration file is responsible for defining _switch VLANs_, _interface configurations_ and _network routes_. After editing and saving '/etc/config/network' you need to execute ---- -/etc/init.d/network reload ----- to stop and restart the network before any changes take effect. Rebooting the router is not necessary. +The central network configuration is located in the file '/etc/config/network'. This configuration file is responsible for defining _switch VLANs_, _interface configurations_ and _network routes_. -* https:_dev.openwrt.org/browser/branches/attitude_adjustment/package/base-files/files/etc/config/network -* https:_dev.openwrt.org/browser/trunk/package/base-files/files/etc/config/network +After editing and saving '/etc/config/network' you need to execute '/etc/init.d/network reload' to stop and restart the network before any changes take effect. Rebooting the router is not necessary. + + * https://dev.openwrt.org/browser/branches/attitude_adjustment/package/base-files/files/etc/config/network + * https://dev.openwrt.org/browser/trunk/package/base-files/files/etc/config/network Feel free to inform yourself about [[doc/techref/netifd|netifd]] (Network Interface Daemon). @@ -20,7 +20,7 @@ CAUTION: The globals section is available in Barrier Breaker and later releases. The 'globals' section contains interface-independent options affecting the network configuration in general. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ula_prefix' | IPv6-prefix | no | _(none)_ | IPv6 [[wp>Unique local address|ULA]]-Prefix for this device @@ -95,7 +95,7 @@ CAUTION: The system limits the interface name length to 15 characters including The _interface protocol_ may be one of the following: -[options="header"] +[cols="1,4,2",options="header"] |==== | Protocol | Description | Program | 'static' | Static configuration with fixed address and netmask | 'ip'/'ifconfig' @@ -131,7 +131,7 @@ CAUTION: In openwrt 12.09, if an interface section has no protocol defined (not === Options valid for all protocol types === -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ifname' | interface name(s) | yes(*) | _(none)_ | Physical interface name to assign to this section, list of interfaces if type bridge is set. _(*) This option may be empty or missing if only a wireless interface references this network or if the protocol type is 'pptp', 'pppoa' or '6in4'_ @@ -153,7 +153,7 @@ CAUTION: In openwrt 12.09, if an interface section has no protocol defined (not === Protocol "static" === -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ipaddr' | ip address | yes, if no 'ip6addr' is set. | _(none)_ | IP address. [openwrt 12.09] It could be a list of ipaddr , that is: several ipaddresses will be assigned to the interface. If, instead of a list, several ipaddr are specified as options, only the last is applied. @@ -174,7 +174,7 @@ CAUTION: In openwrt 12.09, if an interface section has no protocol defined (not === Protocol "dhcp" === -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | '[line-through]*gateway*' | [line-through]*string* | [line-through]*no* | [line-through]*_(none)_* | [line-through]*Suppresses DHCP-assigned default gateway if set to 0.0.0.0* @@ -237,7 +237,7 @@ Both default routes set up by wan and wan2 will appear in the routing table. CAUTION: The package 'odhcp6c' must be installed to use dhcpv6. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'reqaddress' | [try,force,none] | no | try | Behaviour for requesting addresses @@ -260,7 +260,7 @@ CAUTION: The package 'odhcp6c' must be installed to use dhcpv6. CAUTION: The package 'ppp' must be installed to use PPP. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'device' | file path | yes | _(none)_ | Modem device node @@ -286,7 +286,7 @@ opkg update opkg install ppp kmod-pppoe ppp-mod-pppoe ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'username' | string | no(?) | _(none)_ | Username for PAP/CHAP authentication @@ -308,7 +308,7 @@ opkg install ppp kmod-pppoe ppp-mod-pppoe CAUTION: The package 'ppp-mod-pppoa' must be installed to use PPPoA. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'vci' | number | no | '35' | PPPoA VCI @@ -334,7 +334,7 @@ CAUTION: The package 'ppp-mod-pppoa' must be installed to use PPPoA. CAUTION: The package 'comgt' must be installed to use 3G. Check [[doc:recipes:3gdongle]] for further help with that. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'device' | file path | yes | _(none)_ | Modem device node @@ -358,7 +358,7 @@ CAUTION: The package 'comgt' must be installed to use 3G. Check [[doc:recipes:3g CAUTION: The package 'uqmi' must be installed to use QMI. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'device' | file path | yes | _(none)_ | QMI device node, typically /dev/cdc-wdm0 @@ -375,7 +375,7 @@ CAUTION: The package 'uqmi' must be installed to use QMI. CAUTION: The package 'comgt-ncm' + modem specific driver must be installed to use NCM. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'device' | file path | yes | _(none)_ | NCM device node, typically /dev/cdc-wdm0 or /dev/ttyUSB# @@ -393,7 +393,7 @@ CAUTION: The package 'comgt-ncm' + modem specific driver must be installed to us CAUTION: The package 'wwan' must be installed to use this feature. The "wwan" protocol detects the right protocol (3G/QMI/NCM/MBIM) for the USB Modem model and passes the configuration to the protocol. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'apn' | string | yes | _(none)_ | Used APN @@ -410,7 +410,7 @@ CAUTION: The package 'wwan' must be installed to use this feature. The "wwan" pr CAUTION: The package 'hnet-full' must be installed to use hnet. CAUTION: See http:_tools.ietf.org/html/draft-ietf-homenet-hncp for details. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'mode' | string | no | auto | Interface mode. One of external, guest, adhoc or hybrid. @@ -423,7 +423,7 @@ CAUTION: See http:_tools.ietf.org/html/draft-ietf-homenet-hncp for details. CAUTION: The package 'pptp' must be installed to use PPtP. There is a separate Howto for this: [[doc:howto:vpn.client.pptp]]. You need to have another section to configure the "parent" device, and you might need to add "" to your "wan" zone in the firewall ( being the "logical interface name" of this section). -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'server' | ip address | yes | _(none)_ | Remote PPtP server @@ -441,7 +441,7 @@ CAUTION: The package 'pptp' must be installed to use PPtP. There is a separate H CAUTION: The package '6in4' must be installed to use this protocol. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ipaddr' | IPv4 address | no | Current WAN IPv4 address | Local IPv4 endpoint address @@ -474,7 +474,7 @@ CAUTION: The package 'aiccu' must be installed to use this protocol. This utilit CAUTION: This protocol is available for Barrier Breaker and newer versions only. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'username' | string | yes | _(none)_ | Server username @@ -500,7 +500,7 @@ CAUTION: This protocol is available for Barrier Breaker and newer versions only. CAUTION: The package '6to4' must be installed to use this protocol. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ipaddr' | IPv4 address | no | Current WAN IPv4 address | Local IPv4 endpoint address @@ -525,7 +525,7 @@ CAUTION: The package '6rd' must be installed to use this protocol. CAUTION: The needed tunnel values are usually obtained via the DHCPv4 request for the WAN interface. Try that [[doc/uci/network6#rd_tunnel_isp-provided_ipv6_transition|first]]. Below is only needed for hardcoding the tunnel. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'peeraddr' | IPv4 address | yes | no | 6rd - Gateway @@ -548,7 +548,7 @@ CAUTION: The needed tunnel values are usually obtained via the DHCPv4 request fo CAUTION: The package 'ds-lite' must be installed to use this protocol. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'peeraddr' | IPv6 address | yes | no | DS-Lite AFTR address @@ -570,7 +570,7 @@ CAUTION: The package 'xl2tpd' must be installed to use this protocol. Most options are similar to protocol "ppp". -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'server' | string | yes | _(none)_ | L2TP server to connect to. Acceptable datatypes are hostname or IP address, with optional port separated by colon ':'. Note that specifying port is only supported recently and should appear in DD release @@ -589,7 +589,7 @@ The name of the physical interface will be "l2tp-". CAUTION: The package 'relayd' must be installed to use this protocol. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'network' | list of _logical interface names_ | yes | _(none)_ | Specifies the networks between which traffic is relayed @@ -611,7 +611,7 @@ The name of the GRE interface will be 'gre-' for "gre" a All four protocols accept the following common options: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'mtu' | integer | no | 1280 | MTU @@ -631,7 +631,7 @@ All four protocols accept the following common options: The following options are supported, in addition to all common options above: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ipaddr' | IPv4 address | no | WAN IP | Local endpoint @@ -643,7 +643,7 @@ The following options are supported, in addition to all common options above: The following options are supported, in addition to all common options above: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ipaddr' | IPv4 address | no | WAN IP | Local endpoint @@ -656,7 +656,7 @@ The following options are supported, in addition to all common options above: The following options are supported, in addition to all common options above: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ip6addr' | IPv6 address | no | WAN IP | Local endpoint @@ -668,7 +668,7 @@ The following options are supported, in addition to all common options above: The following options are supported, in addition to all common options above: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ip6addr' | IPv6 address | no | WAN IP | Local endpoint @@ -683,7 +683,7 @@ The following options are supported, in addition to all common options above: VTI Tunnels are IPsec policies with a fwmark set. The traffic is redirected to the matching VTI interface. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ipaddr' | IPv4 address | no | WAN IP | Local endpoint @@ -699,7 +699,7 @@ VTI Tunnels are IPsec policies with a fwmark set. The traffic is redirected to t The following options are supported, in addition to all common options above: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'ip6addr' | IPv6 address | no | WAN IP | Local endpoint @@ -725,7 +725,7 @@ config device 'eth0.106' VLAN Interfaces may be configured also. If not, they are created on the fly by netifd. Defining VLANs gives more options. The following options are supported: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'type' | VLAN Type | no | 802.1q | VLAN type, possible values: 8021q or 8021ad @@ -757,7 +757,7 @@ config atm-bridge The 'atm-bridge' section allows the following options: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'unit' | number | yes | '0' | Specifies the br2684 interface number. If ommitted, '0' is assumed which would result in a 'nas0' pseudo interface. @@ -783,7 +783,7 @@ config vdsl 'dsl' The 'dsl' section allows the following options: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'annex' | string | yes | 'b' | Specifies the Annex setting (ISP/line dependent). Supported values on lantiq AMAZON and DANUBE devices: b, bdmt, b2, b2p, a, at1, alite, admt, a2, a2p, l, m, m2, m2p. Supported values on lantiq ARX100 "AR9" and VRX200 "VR9" devices: a, b, j @@ -879,7 +879,7 @@ config 'route' 'name_your_route' Legal options for _IPv4 routes_ are: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'interface' | string | yes | _(none)_ | Specifies the _logical interface name_ of the parent (or master) interface this route belongs to; must refer to one of the defined 'interface' sections @@ -921,7 +921,7 @@ config 'route6' Legal options for _IPv6 routes_ are: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'interface' | string | yes | _(none)_ | Specifies the _logical interface name_ of the parent (or master) interface this route belongs to; must refer to one of the defined 'interface' sections @@ -937,7 +937,7 @@ Legal options for _IPv6 routes_ are: === Routing Types === -[options="header"] +[cols="1,4",options="header"] |==== | Type | Description | 'unicast' | the route entry describes real paths to the destinations covered by the route prefix. @@ -986,7 +986,7 @@ config rule6 The options below are defined for _IP rule_ ('rule' and 'rule6') sections: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'in' | string | no | _(none)_ | Specifies the incoming _logical interface name_ @@ -1004,7 +1004,7 @@ The options below are defined for _IP rule_ ('rule' and 'rule6') sections: === Routing Actions === -[options="header"] +[cols="1,4",options="header"] |==== | Action | Description | 'prohibit' | When reaching the rule, respond with _ICMP prohibited_ messages and abort route lookup diff --git a/docs/uci_system.txt b/docs/uci_system.txt index d0aaf13..a829b4d 100644 --- a/docs/uci_system.txt +++ b/docs/uci_system.txt @@ -17,7 +17,7 @@ config 'system' These options can be set in the system section: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'hostname' | string | no | 'OpenWrt' | The hostname for this system. Avoid points, even if they are within single7double quotes. For example ' 'my.hostname' ' will show only the ' 'my' ' part @@ -60,7 +60,7 @@ config 'timeserver' 'ntp' There are at least two valid option defined for the 'timeserver' 'ntp' section: -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'server' | list of hostnames | no | _(none)_ | Defines the pool of NTP servers to poll the time from. If the list is empty, the builtin NTP daemon is not started. @@ -108,7 +108,7 @@ opkg install kmod-ledtrig-morse --force-depends The LED is always in default state. Unlisted LED are default OFF, so this is only useful to declare a LED to be always ON. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -123,7 +123,7 @@ The LED blinks with the configured on/off frequency. opkg install kmod-ledtrig-timer ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -140,7 +140,7 @@ The LED is ON. Deprecated, use default=1 trigger=none instead. opkg install kmod-ledtrig-default-on ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -154,7 +154,7 @@ The LED flashes to simulate actual heart beat _thump-thump-pause_. The frequency ---- opkg install kmod-ledtrig-heartbeat ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -168,7 +168,7 @@ Note:_to test the heartbeat take a look at [[doc:howto:snippets#generate.100.cpu The LED flashes as data is written to flash memory. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -183,7 +183,7 @@ The LED flashes with link status and/or send and receive activity on the configu opkg install kmod-ledtrig-netdev ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -202,7 +202,7 @@ triggers have more events, it also provides possibility of static LED setup in c radio ('phy0' usually) and 5 GHz radio ('phy1' usually) separately. 'netdev' can't guarantee this distinguishing since 'wlan0' may be referring to 2.4 GHz or 5 GHz radio based on current network setup. -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -223,7 +223,7 @@ The LED turns ON if USB device is connected. opkg install kmod-ledtrig-usbdev ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -244,7 +244,7 @@ Requires the kmod-ledtrig-morse package. UCI configuration was added in revision opkg install kmod-ledtrig-morse ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -264,7 +264,7 @@ Allows LEDs to be controlled by gpio events. opkg install kmod-ledtrig-gpio ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON @@ -289,7 +289,7 @@ opkg install kmod-ledtrig-netfilter ---- -[options="header"] +[cols="4*1,4",options="header"] |==== | Name | Type | Required | Default | Description | 'default' | integer | no | 0 | LED state before trigger: '0' means OFF and '1' means ON -- 2.30.2