drm/virtio: Use the drm_driver.dumb_destroy default

virtio_gpu_mode_dumb_destroy() is the same as drm_gem_dumb_destroy()
which is the drm_driver.dumb_destroy default, so no need to set it.

Cc: David Airlie <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bochs: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Gerd Hoffmann <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/mgag200: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/exynos: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.
Use drm_gem_dumb_map_offset() in exynos_drm_gem_map_ioctl() and
remove exynos_drm_gem_dumb_map_offset().

Cc: Joonyoung Shim <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Kyungmin Park <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/msm: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Rob Clark <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/ast: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/qxl: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/udl: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/cirrus: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Dave Airlie <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/tegra: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Thierry Reding <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/gma500: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Patrik Jakobsson <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/mxsfb: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Marek Vasut <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/meson: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Neil Armstrong <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/kirin: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Xinliang Liu <[email protected]>
Cc: Rongrong Zou <[email protected]>
Cc: Xinwei Kong <[email protected]>
Cc: Chen Feng <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vc4: Continue the switch to drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

v2: Tweak commit summary to distinguish it from the previous commit
    covering everything but the new bo_label ioctl (by anholt).

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Eric Anholt <[email protected]>

drm/vc4: Fix leak of HDMI EDID

We don't keep a pointer to it around anywhere, so it's our job to free
it.

Cc: Stefan Wahren <[email protected]>
Link: https://github.com/anholt/linux/issues/101
Fixes: c8b75bca92cb ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Daniel Vetter <[email protected]>
Tested-by: Stefan Wahren <[email protected]>

dma-buf: fix reservation_object_wait_timeout_rcu to wait correctly v2

With hardware resets in mind it is possible that all shared fences are
signaled, but the exlusive isn't. Fix waiting for everything in this situation.

v2: make sure we always wait for the exclusive fence

Acked-by: Sumit Semwal <[email protected]>
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Chunming Zhou <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

dma-buf: add reservation_object_copy_fences (v2)

Allows us to copy all the fences in a reservation object to another one.

v2: handle NULL src_list

Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/tinydrm: add support for LEGO MINDSTORMS EV3 LCD

LEGO MINDSTORMS EV3 has an LCD with a ST7586 controller. This adds a new
module for the ST7586 controller with parameters for the LEGO MINDSTORMS
EV3 LCD display.

Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

dt-bindings: add binding for Sitronix ST7586 display panels

This adds a new binding for Sitronix ST7586 display panels.

Using lego as the vendor prefix in the compatible string because the display
panel I am working with is an integral part of the LEGO MINDSTORMS EV3.

Signed-off-by: David Lechner <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/mgag200: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vgem: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/udl: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/cirrus: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/ast: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Acked-by: Joel Stanley <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/hisilicon: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/mediatek: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: vboxvideo: switch to drm_*_get(), drm_*_put() helpers

Use drm_*_get() and drm_*_put() helpers instead of drm_*_reference()
and drm_*_unreference() helpers.

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to
use the new APIs.

Generated by: scripts/coccinelle/api/drm-get-put.cocci

Signed-off-by: Cihangir Akturk <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Clean up drm_dev_unplug

Use drm_dev_unregister to unregister the interfaces, which also allows
us to simplify the open_count == 0 case.

Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Only lastclose on unload for legacy drivers

The only thing modern drivers are supposed to do in lastclose is
restore the fb emulation state. Which is entirely optional, and
there's really no reason to do that. So restrict it to legacy drivers
(where the driver cleanup essentially happens in lastclose).

This will also allow us to share the unregister function with
drm_dev_unplug().

Quoting my reply to Alex on dri-devel:
On Thu, Aug 3, 2017 at 1:17 AM, Daniel Vetter <[email protected]> wrote:
> On Wed, Aug 2, 2017 at 10:50 PM, Alex Deucher <[email protected]> wrote:
>> On Wed, Aug 2, 2017 at 7:56 AM, Daniel Vetter <[email protected]> wrote:
>>> The only thing modern drivers are supposed to do in lastclose is
>>> restore the fb emulation state. Which is entirely optional, and
>>> there's really no reason to do that. So restrict it to legacy drivers
>>> (where the driver cleanup essentially happens in lastclose).
>>
>> vga_switcheroo_process_delayed_switch() gets called in lastclose.
>> Won't that need to get moved elsewhere for this to work?
>
> Hm right, I forgot the lazy way to do runtime pm by keeping the device
> alive as long as anyone has an open fd for it ... This shouldn't be a
> problem, since you need to unregister from vgaswitcheroo anyway on
> unload. Maybe that blows up, I'll check the code and augment the patch
> as needed.

So I think there's 3 cases:
- Trying to unload the module. You can't do that while anyone has the
fd still open, so lastclose is guaranteeed to run.
- Forcefully unbinding the driver through sysfs. Not any better, since
the can_switch stuff checks for the open count, and so will delay the
delayed switch no matter what.
- Actual hotremoval: a) not implemented since none of the drivers
taking part in vgaswitcheroo correctly unplug the drm device and b)
you can't hotremove a chip from a laptop.

v2: Extend commit message with m-l discussion.

Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Document device unplug infrastructure

While at it, also ocd and give them a consistent drm_dev_ prefix, like
the other device instance functionality. Plus move the functions into
the right places.

Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Extract drm_device.h

I need this to untangle an include loop in the next patch.

Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

dma-buf: dma_fence_put is NULL safe

No need to check.

Acked-by: Sumit Semwal <[email protected]>
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: make drm_mode_config_func const

Make these structures const as they are only stored in the funcs field
of a drm_mode_config structure which is of type const.
Done using Coccinelle:

@match disable optional_qualifier@
identifier s;
@@
static struct drm_mode_config_funcs s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
identifier y;
position ref.p;
identifier match.s;
@@
struct drm_mode_config y = {...,.funcs=&s@p,...};

@good2@
struct drm_mode_config y;
identifier match.s;
position ref.p;
@@
y.funcs = &s@p

@bad depends on  !good1 && !good2@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct drm_mode_config_funcs s;

Signed-off-by: Bhumika Goyal <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/virtio: make drm_fb_helper_funcs const

Make these structures const as they are only passed to the function
drm_fb_helper_prepare and the corresponding argument is of type const.
Done using Coccinelle

@match disable optional_qualifier@
identifier s;
@@
static struct drm_fb_helper_funcs s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
identifier match.s;
expression e1,e2;
position ref.p;
@@
drm_fb_helper_prepare(e1,e2,&s@p,...)

@bad depends on  !good1@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct drm_fb_helper_funcs s;

Signed-off-by: Bhumika Goyal <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: make drm_connector_funcs structures const

Make these const as they are only passed to the function
drm_connector_init and the corresponding argument is of type const.
Done using Coccinelle

@match disable optional_qualifier@
identifier s;
@@
static struct drm_connector_funcs s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
identifier match.s;
expression e1,e2;
position ref.p;
@@
drm_connector_init(e1,e2,&s@p,...)

@bad depends on  !good1@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct drm_connector_funcs s;

Signed-off-by: Bhumika Goyal <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/sun4i: make drm_connector_funcs structures const

Make these const as they are only passed to the function
drm_connector_init and the corresponding argument is of type const.
Done using Coccinelle

@match disable optional_qualifier@
identifier s;
@@
static struct drm_connector_funcs s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
identifier match.s;
expression e1,e2;
position ref.p;
@@
drm_connector_init(e1,e2,&s@p,...)

@bad depends on  !good1@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct drm_connector_funcs s;

Signed-off-by: Bhumika Goyal <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: make drm_connector_funcs structures const

Make these const as they are only passed to the function
drm_connector_init and the corresponding argument is of type const.
Done using Coccinelle

@match disable optional_qualifier@
identifier s;
@@
static struct drm_connector_funcs s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
identifier match.s;
expression e1,e2;
position ref.p;
@@
drm_connector_init(e1,e2,&s@p,...)

@bad depends on  !good1@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct drm_connector_funcs s;

Signed-off-by: Bhumika Goyal <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Laurent Pinchart <[email protected]>

drm/tinydrm: Generalize tinydrm_xrgb8888_to_gray8()

This adds parameters for vaddr and clip to tinydrm_xrgb8888_to_gray8() to
make it more generic.

dma_buf_{begin,end}_cpu_access() are moved out to the repaper driver.

Return type is change to void to simplify error handling by callers.

Signed-off-by: David Lechner <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Shift wrap bug in create_in_format_blob()

"plane->format_count" can go up to 64.  (It's capped in
drm_universal_plane_init().)  So we should be using ULL type instead of
int here to prevent shift wrapping.

Fixes: db1689aa61bd ("drm: Create a format/modifier blob")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20170809111906.4rv3hzritctfktv3@mwanda

drm: bridge: dw-hdmi: constify snd_pcm_ops structures

snd_pcm_ops are not supposed to change at runtime. All functions
working with snd_pcm_ops provided by <sound/pcm.h> work with
const snd_pcm_ops. So mark the non-const structs as const.

Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Arvind Yadav <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/44c0ccab8b5658d17a3ed553e721136b53d95521.1502264156.git.arvind.yadav.cs@gmail.com

drm/bridge: make drm_bridge_funcs const

Make these structures const as they are only stored in the funcs field
of drm_bridge structure, which is of type const.
Done using Coccinelle.

Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Bhumika Goyal <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/vc4: Add exec flags to allow forcing a specific X/Y tile walk order.

This is useful to allow GL to provide defined results for overlapping
glBlitFramebuffer, which X11 in turn uses to accelerate uncomposited
window movement without first blitting to a temporary.  x11perf
-copywinwin100 goes from 1850/sec to 4850/sec.

v2: Default to the same behavior as before when the flags aren't
    passed. (suggested by Boris)

Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Boris Brezillon <[email protected]>

drm/vc4: Demote user-accessible DRM_ERROR paths to DRM_DEBUG.

Userspace shouldn't be able to spam dmesg by passing bad arguments.
This has particularly become an issues since we started using a bad
argument to set_tiling to detect if set_tiling was supported.

Signed-off-by: Eric Anholt <[email protected]>
Fixes: 83753117f1de ("drm/vc4: Add get/set tiling ioctls.")
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Boris Brezillon <[email protected]>

drm/vc4: switch to drm_*{get,put} helpers

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() adn should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.

Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Eric Anholt <[email protected]>

drm/vc4: Fix errant drm_bridge_remove() in DSI.

drm_bridge_remove() is for unregistering a bridge driver, not for
detaching a bridge from its consumer.

Fixes: 656fa22f9cea ("drm/vc4: Switch DSI to the panel-bridge layer, and support bridges.")
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Noralf Trønnes <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>

drm/vc4: Don't disable DSI clocks on component unload.

The clocks are enabled/disabled at encoder enable/disable time, not at
component load.  Fixes a WARN_ON at boot if V3D fails to probe.

Fixes: 4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Noralf Trønnes <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>

drm/vc4: Fix double destroy of the BO cache on teardown.

It's also destroyed from the top level vc4_drv.c initialization, which
is where the cache was actually initialized from.

This used to just involve duplicate del_timer() and cancel_work_sync()
being called, but it started causing kmalloc issues once we
double-freed the new BO label array.

Fixes: 1908a876f909 ("drm/vc4: Add an ioctl for labeling GEM BOs for summary stats")
Signed-off-by: Eric Anholt <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Tested-by: Noralf Trønnes <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Reviewed-by: Boris Brezillon <[email protected]>

drm: Nuke drm_atomic_legacy_backoff

Finally all users are gone!

Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Nuke drm_atomic_helper_connector_dpms

It's dead code, the core handles all this directly now.

The only special case is nouveau and tda988x which used one function
for both legacy modeset code and -nv50 atomic world instead of 2
vtables. But amounts to exactly the same.

v2: Rebase over the panel/brideg refactorings in stm/ltdc.

Signed-off-by: Daniel Vetter <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Peter Senna Tschudin <[email protected]>
Cc: Martin Donnelly <[email protected]>
Cc: Martyn Welch <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Joonyoung Shim <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Alison Wang <[email protected]>
Cc: Russell King <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: CK Hu <[email protected]>
Cc: Matthias Brugger <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Carlo Caione <[email protected]>
Cc: Kevin Hilman <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: Mark Yao <[email protected]>
Cc: Heiko Stuebner <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Yannick Fertre <[email protected]>
Cc: Philippe Cornu <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Chen-Yu Tsai <[email protected]>
Cc: Thierry Reding <[email protected]>
Cc: Jonathan Hunter <[email protected]>
Cc: Jyri Sarha <[email protected]>
Cc: Gerd Hoffmann <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: John Stultz <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Sergei Shtylyov <[email protected]>
Cc: Jeffy Chen <[email protected]>
Cc: Tomeu Vizoso <[email protected]>
Cc: Yakir Yang <[email protected]>
Cc: Marek Szyprowski <[email protected]>
Cc: Jose Abreu <[email protected]>
Cc: Romain Perier <[email protected]>
Cc: Kieran Bingham <[email protected]>
Cc: Xinliang Liu <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: Rongrong Zou <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Hai Li <[email protected]>
Cc: "Noralf Trønnes" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: zain wang <[email protected]>
Cc: Baoyou Xie <[email protected]>
Cc: Boris Brezillon <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Neil Armstrong <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Acked-by: Philipp Zabel <[email protected]>
Acked-by: Archit Taneja <[email protected]>
Tested-by: Philippe Cornu <[email protected]> (on stm)
Reviewed-by: Laurent Pinchart <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Shawn Guo <[email protected]>
Acked-by: Noralf Trønnes <[email protected]>
Acked-by: Vincent Abriou <[email protected]>

drm: Nuke drm_atomic_helper_connector_set_property

It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_helper_connector_set_property.

The only special case is nouveau which used one function for both
pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2
vtables. But amounts to exactly the same.

What is rather strange here is how few drivers set this up, I suspect
the earlier patch to handle properties in the core did end up fixing a
pile of possible issues.

Signed-off-by: Daniel Vetter <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Eric Anholt <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Vincent Abriou <[email protected]>

drm: Nuke drm_atomic_helper_plane_set_property

It's dead code, the core handles all this directly now. This also
allows us to unexport drm_atomic_plane_set_property.

Signed-off-by: Daniel Vetter <[email protected]>
Cc: Liviu Dudau <[email protected]>
Cc: Brian Starkey <[email protected]>
Cc: Mali DP Maintainers <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Inki Dae <[email protected]>
Cc: Joonyoung Shim <[email protected]>
Cc: Seung-Woo Kim <[email protected]>
Cc: Kyungmin Park <[email protected]>
Cc: Kukjin Kim <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Yannick Fertre <[email protected]>
Cc: Philippe Cornu <[email protected]>
Cc: Jyri Sarha <[email protected]>
Cc: "Ville Syrjälä" <[email protected]>
Cc: Rongrong Zou <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Eric Engestrom <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Thomas Hellstrom <[email protected]>
Cc: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Archit Taneja <[email protected]>
Acked-by: Philippe Cornu <[email protected]>
Tested-by: Philippe Cornu <[email protected]>
Acked-by: Liviu Dudau <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>

drm: Nuke drm_atomic_helper_crtc_set_property

It's dead code because this is now handled in the core.

Signed-off-by: Daniel Vetter <[email protected]>
Cc: Boris Brezillon <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Alexey Brodkin <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Eric Engestrom <[email protected]>
Cc: Chris Wilson <[email protected]>
Cc: "Ville Syrjälä" <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Philippe Cornu <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Sushmita Susheelendra <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Philipp Zabel <[email protected]>
Cc: Maxime Ripard <[email protected]>
Cc: Thomas Hellstrom <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Archit Taneja <[email protected]>
Acked-by: Philippe Cornu <[email protected]>
Tested-by: Philippe Cornu <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Acked-by: Thomas Hellstrom <[email protected]>

drm: Handle properties in the core for atomic drivers

The reason behind the original indirection through the helper
functions was to allow existing drivers to overwrite how they handle
properties. For example when a vendor-specific userspace had
expectations that didn't match atomic. That seemed likely, since
atomic is standardizing a _lot_ more of the behaviour of a kms driver.

But 20 drivers later there's no such need at all. Worse, this forces
all drivers to hook up the default behaviour, breaking userspace if
they forget to do that. And it forces us to export a bunch of core
function just for those helpers.

And finally, these helpers are the last places using
drm_atomic_legacy_backoff() and the implicit acquire_ctx.

This patch here just implements the new behaviour and updates the
docs. Follow-up patches will garbage-collect all the dead code.

v2: Fixup docs even better!

v3: Make it actually work ...

v4: Drop the uses_atomic_modeset() checks from the previous patch
again, since they're now moved up in the callchain.

Cc: Maarten Lankhorst <[email protected]>
Reviewed-by: Archit Taneja <[email protected]> (v3)
Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Don't update property values for atomic drivers

Atomic drivers only use the property value store for immutable (i.e.
can't be set by userspace, but the kernel can still adjust it)
properties. The only tricky part is the removal of the update in
drm_atomic_helper_update_legacy_modeset_state().

This was added in

commit 8c10342cb48f3140d9abeadcfd2fa6625d447282 (tag: topic/drm-misc-2015-07-28)
Author: Maarten Lankhorst <[email protected]>
Date:   Mon Jul 27 13:24:29 2015 +0200

    drm/atomic: Update legacy DPMS state during modesets, v3.

by copying it from the i915 code, where it was originally added in

commit 68d3472047a572936551f8ff0b6f4016c5a1fdef
Author: Daniel Vetter <[email protected]>
Date:   Thu Sep 6 22:08:35 2012 +0200

    drm/i915: update dpms property in set_mode

for the legacy modeset code. The reason we needed this hack was that
i915 didn't yet set DRIVER_ATOMIC, and we checked for that instead of
the newer-ish drm_drv_uses_atomic_modeset(), which avoids such
troubles. With the correct feature checks this isn't needed anymore at
all.

Also make sure that drivers don't accidentally get this wrong by
making the exported version of drm_object_property_get_value() only
work for legacy drivers. Only gma500 uses it anyway.

v2: Fixup the uses_atomic_modeset() checks (Maarten)

Cc: Maarten Lankhorst <[email protected]>
Reviewed-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/omap: Rework the rotation-on-crtc hack

I want/need to rework the core property handling, and this hack is
getting in the way. But since it's a non-standard propety only used by
legacy userspace we know that this will only every be called from
ioctl code. And never on some other free-standing state struct, where
this old hack wouldn't work either.

v2: don't forget zorder and get_property!

v3: Shadow the legacy state to avoid locking issues in get_property
(Maarten).

v4: Review from Laurent
- Move struct omap_crtc_state into omap_crtc.c
- Clean up comments.
- Don't forget to copy the shadowed state over on duplicate.

v5: Don't forget to update the reset handler (Maarten).
v6: Update omap_crtc_state shadow values in omap_crtc_atomic_check (Maarten).
v7:
- Fix get_property to return 0 and set value in *val (Maarten).
- Update comment in set_property for changes in v6 (Maarten).

Reviewed-by: Laurent Pinchart <[email protected]> (v4)
Cc: Maarten Lankhorst <[email protected]>
Cc: Tomi Valkeinen <[email protected]
Cc: Laurent Pinchart <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]> (v4)
Signed-off-by: Maarten Lankhorst <[email protected]>
Reviewed-by: Tomi Valkeinen <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/radeon: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Alex Deucher <[email protected]>
Cc: Christian König <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/i915: Use the drm_driver.dumb_destroy default

drm_gem_dumb_destroy() is the drm_driver.dumb_destroy default,
so no need to set it.

Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/sti: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Benjamin Gaignard <[email protected]>
Cc: Vincent Abriou <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Vincent Abriou <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: bridge: synopsys/dw-hdmi: Provide default configuration function for HDMI 2.0 PHY

Currently HDMI 2.0 PHYs do not have a default configuration function.

As *some* of the HDMI 2.0 PHYs have the same register layout as the 3D
PHYs we can provide the same default configuration function for both
and still let user overwrite this with custom configuration function
if needed.

If, for some reason, the PHY is custom or has a register different
register layout then custom configuration function *must* be provided
in order for the system to work correctly. As we prefer the pdata
provided configuration function over the internal one this change
will not make any impact in custom platforms.

Signed-off-by: Jose Abreu <[email protected]>
Tested-by: Mark Yao <[email protected]>
Cc: Kieran Bingham <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Andrzej Hajda <[email protected]>
Cc: Mark Yao <[email protected]>
Cc: Carlos Palminha <[email protected]>
Cc: Heiko Stübner <[email protected]>
Reviewed-by: Laurent Pinchart <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/185ccf7d4473fa557044732402ca20b3d4007952.1498209896.git.joabreu@synopsys.com

drm/fb-helper: pass physical dimensions to fbdev

The fbdev subsystem has a place for physical dimensions (width and height
in mm) that is readable by userspace. Since DRM also knows these
dimensions, pass this information to the fbdev device.

This has to be done in drm_setup_crtcs_fb() instead of drm_setup_crtcs()
because fb_helper->fbdev may be NULL in drm_setup_crtcs().

Signed-off-by: David Lechner <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

uapi drm/armada_drm.h: use __u32 and __u64 instead of uint32_t and uint64_t

These are defined in linux/types.h or drm/drm.h. Fixes
user space compilation errors like:

drm/armada_drm.h:26:2: error: unknown type name ‘uint32_t’
  uint32_t handle;
  ^~~~~~~~

Signed-off-by: Mikko Rapeli <[email protected]>
Cc: Emil Velikov <[email protected]>
Cc: Gabriel Laskar <[email protected]>
Cc: Russell King <[email protected]>
Cc: Rob Clark <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: dw-hdmi: remove CEC engine register definitions

We don't need the CEC engine register definitions, so let's remove them.

Signed-off-by: Russell King <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
Tested-by: Hans Verkuil <[email protected]>
Tested-by: Laurent Pinchart <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: dw-hdmi: add cec driver

Add a CEC driver for the dw-hdmi hardware.

Reviewed-by: Neil Armstrong <[email protected]>
Signed-off-by: Russell King <[email protected]>
[hans.verkuil: unsigned -> unsigned int]
[hans.verkuil: cec_transmit_done -> cec_transmit_attempt_done]
[hans.verkuil: add missing CEC_CAP_PASSTHROUGH]
Acked-by: Hans Verkuil <[email protected]>
Tested-by: Hans Verkuil <[email protected]>
Tested-by: Laurent Pinchart <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: dw-hdmi: add missing cec_notifier_put

The __dw_hdmi_remove() function was missing a call to cec_notifier_put
to balance the cec_notifier_get in the probe function.

Signed-off-by: Hans Verkuil <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: remove unused and redundant callbacks

Drivers no longer have any need for these callbacks, and there are no
users. Zap. Zap-zap-zzzap-p-pp-p.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

staging: vboxvideo: remove dead gamma lut code

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code that was not doing anything
sensible anyway.

Signed-off-by: Peter Rosin <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: dw-hdmi-i2s: add missing company name on Copyright

This driver's Copyright is under Renesas Solutions Corp.
This patch updates the year, because this driver was moved
into synopsys folder in 2017.

Signed-off-by: Kuninori Morimoto <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/87tw1khvnq.wl%[email protected]

drm/bridge: dw-hdmi: add better clock disable control

The video setup path aways sets the clock disable register to a specific
value, which has the effect of disabling the CEC engine.  When we add the
CEC driver, this becomes a problem.

Fix this by only setting/clearing the bits that the video path needs to.

Reviewed-by: Jose Abreu <[email protected]>
Signed-off-by: Russell King <[email protected]>
Tested-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/bridge: dw-hdmi: add cec notifier support

Add CEC notifier support to the HDMI bridge driver, so that the CEC
part of the IP can receive its physical address.

Signed-off-by: Russell King <[email protected]>
Tested-by: Neil Armstrong <[email protected]>
Reviewed-by: Neil Armstrong <[email protected]>
Tested-by: Laurent Pinchart <[email protected]>
Acked-by: Hans Verkuil <[email protected]>
Signed-off-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/tinydrm: remove call to mipi_dbi_init() from mipi_dbi_spi_init()

This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that
drivers can have a driver-specific implementation if needed.

Suggested-by: Noralf Trønnes <[email protected]>
Signed-off-by: David Lechner <[email protected]>
Reviewed-by: Noralf Trønnes <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/fsl-dcu: Use .dumb_map_offset and .dumb_destroy defaults

This driver can use the drm_driver.dumb_destroy and
drm_driver.dumb_map_offset defaults, so no need to set them.

Cc: Stefan Agner <[email protected]>
Cc: Alison Wang <[email protected]>
Signed-off-by: Noralf Trønnes <[email protected]>
Acked-by: Stefan Agner <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: stm: remove dead code and pointless local lut storage

The redundant fb helper .load_lut is no longer used, and can not
work right without also providing the fb helpers .gamma_set and
.gamma_get thus rendering the code in this driver suspect.

Just remove the dead code.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: radeon: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: nouveau: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: mgag200: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: i915: remove dead code and pointless local lut storage

The driver stores lut values from the fbdev interface, and is able
to give them back, but does not appear to do anything with these
lut values. The generic fb helpers have replaced this function,
and may even have made the driver work for the C8 mode from the
fbdev interface. But that is untested.

Since the fb helpers .gamma_set and .gamma_get are obsolete,
remove the dead code.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: gma500: remove dead code and pointless local lut storage

The redundant fb helpers .gamma_set and .gamma_get are no longer
used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: cirrus: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: ast: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: armada: remove dead empty functions

The redundant fb helpers .gamma_set and .gamma_get are no longer used.
Remove the dead code.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: amd: remove dead code and pointless local lut storage

The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.

Acked-by: Daniel Vetter <[email protected]>
Signed-off-by: Peter Rosin <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: fix race with kms hotplug and fbdev

According to the kerneldoc[0], should do fbdev setup before calling
drm_kms_helper_poll_init(), otherwise, Kms hotplug event may race
into fbdev helper initial, and fb_helper->dev may be NULL pointer,
that would cause the bug:
[    0.735411] [00000200] *pgd=00000000f6ffe003, *pud=00000000f6ffe003, *pmd=0000000000000000
[    0.736156] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[    0.736648] Modules linked in:
[    0.736930] CPU: 2 PID: 20 Comm: kworker/2:0 Not tainted 4.4.41 #20
[    0.737480] Hardware name: Rockchip RK3399 Board rev2 (BOX) (DT)
[    0.738020] Workqueue: events cdn_dp_pd_event_work
[    0.738447] task: ffffffc0f21f3100 ti: ffffffc0f2218000 task.ti: ffffffc0f2218000
[    0.739109] PC is at mutex_lock+0x14/0x44
[    0.739469] LR is at drm_fb_helper_hotplug_event+0x30/0x114
[    0.756253] [<ffffff8008a344f4>] mutex_lock+0x14/0x44
[    0.756260] [<ffffff8008445708>] drm_fb_helper_hotplug_event+0x30/0x114
[    0.756271] [<ffffff8008473c84>] rockchip_drm_output_poll_changed+0x18/0x20
[    0.756280] [<ffffff8008439fcc>] drm_kms_helper_hotplug_event+0x28/0x34
[    0.756286] [<ffffff800846c444>] cdn_dp_pd_event_work+0x394/0x3c4
[    0.756295] [<ffffff80080b2b38>] process_one_work+0x218/0x3e0
[    0.756302] [<ffffff80080b3538>] worker_thread+0x2e8/0x404
[    0.756308] [<ffffff80080b7e70>] kthread+0xe8/0xf0
[    0.756316] [<ffffff8008082690>] ret_from_fork+0x10/0x40

[0]: https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms-helpers.html

Signed-off-by: Mark Yao <[email protected]>
Reviewed-by: Sandy huang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: vop: report error when check resource error

The user would be confused while facing a error commit without
any error report.

Signed-off-by: Mark Yao <[email protected]>
Reviewed-by: Sandy huang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: vop: round_up pitches to word align

VOP pitch register is word align, need align to word.

VOP_WIN0_VIR:
  bit[31:16] win0_vir_stride_uv
    Number of words of Win0 uv Virtual width
  bit[15:0] win0_vir_width
    Number of words of Win0 yrgb Virtual width
    ARGB888 : win0_vir_width
    RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3)
    RGB565 : ceil(win0_vir_width/2)
    YUV : ceil(win0_vir_width/4)

Signed-off-by: Mark Yao <[email protected]>
Reviewed-by: Sandy huang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: vop: fix NV12 video display error

fixup the scale calculation formula on the case
src_height == (dst_height/2).

Signed-off-by: Mark Yao <[email protected]>
Reviewed-by: Sandy huang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: vop: fix iommu page fault when resume

Iommu would get page fault with following path:
   vop_disable:
      1, disable all windows and set vop config done
      2, vop enter to standy, all windows not works, but their registers
         are not clean, when you read window's enable bit, may found the
         window is enable.

   vop_enable:
      1, memcpy(vop->regsbak, vop->regs, len)
         save current vop registers to vop->regsbak, then you can found
         window is enable on regsbak.
      2, VOP_WIN_SET(vop, win, gate, 1);
         force enable window gate, but gate and enable are on same
         hardware register, then window enable bit rewrite to vop hardware.
      3, vop power on, and vop might try to scan destroyed buffer,
         then iommu get page fault.

Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.

Signed-off-by: Mark Yao <[email protected]>
Reviewed-by: Sandy huang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/rockchip: vop: no need wait vblank on crtc enable

Since atomic framework, crtc enable and disable are in pairs,
no need to wait vblank.

Signed-off-by: Mark Yao <[email protected]>
Reviewed-by: Sandy huang <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/fb-helper: add new drm_setup_crtcs_fb() function

This adds a new drm_setup_crtcs_fb() function to handle the parts of
drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When
drm_setup_crtcs() is called during initialization, these fields are NULL
because they have not been allocated yet.

There is currently a hack at the end of drm_fb_helper_single_fb_probe()
that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb()
function.

This is also done in preparation for addition setup that requires access
to fb_helper->fbdev.

Signed-off-by: David Lechner <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/atmel-hlcdc: switch to drm_*{get,put} helpers

drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.

Signed-off-by: Cihangir Akturk <[email protected]>
Acked-by: Boris Brezillon <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/atmel-hlcdc : constify drm_plane_helper_funcs and drm_plane_funcs.

drm_plane_helper_funcs and drm_plane_funcsare not supposed to change
at runtime. All functions working with drm_plane_helper_funcs and
drm_plane_funcs work with const. So mark the non-const structs as const.

File size before:
   text    data     bss     dec     hex filename
   6072     596       0    6668    1a0c atmel_hlcdc_plane.o

File size After adding 'const':
   text    data     bss     dec     hex filename
   6218     436       0    6654    19fe atmel_hlcdc_plane.o

Signed-off-by: Arvind Yadav <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/646415a3b2e62182f85254115e8491e5caf4b2c7.1499098826.git.arvind.yadav.cs@gmail.com

drm/fb: Fix pointer dereference before null check.

fb_crtc is used before a null check, so move the use after the null check.

This was just identified by inspection. I haven't actually observed a crash
here, so it is possible that the null check could be unnecessary.

Signed-off-by: David Lechner <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Create a format/modifier blob

Updated blob layout (Rob, Daniel, Kristian, xerpi)

v2:
* Removed __packed, and alignment (.+)
* Fix indent in drm_format_modifier fields (Liviu)
* Remove duplicated modifier > 64 check (Liviu)
* Change comment about modifier (Liviu)
* Remove arguments to blob creation, use plane instead (Liviu)
* Fix data types (Ben)
* Make the blob part of uapi (Daniel)

v3:
Remove unused ret field.
Change i, and j to unsigned int (Emil)

v4:
Use plane->modifier_count instead of recounting (Daniel)

v5:
Rename modifiers to modifiers_property (Ville)
Use sizeof(__u32) instead to reflect UAPI nature (Ville)
Make BUILD_BUG_ON for blob header size

Cc: Rob Clark <[email protected]>
Cc: Kristian H. Kristensen <[email protected]>
Signed-off-by: Ben Widawsky <[email protected]>
Reviewed-by: Daniel Stone <[email protected]> (v2)
Reviewed-by: Liviu Dudau <[email protected]> (v2)
Reviewed-by: Emil Velikov <[email protected]> (v3)
Signed-off-by: Daniel Stone <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]

drm: Plumb modifiers through plane init

This is the plumbing for supporting fb modifiers on planes. Modifiers
have already been introduced to some extent, but this series will extend
this to allow querying modifiers per plane. Based on this, the client to
enable optimal modifications for framebuffers.

This patch simply allows the DRM drivers to initialize their list of
supported modifiers upon initializing the plane.

v2: A minor addition from Daniel

v3:
* Updated commit message
* s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu)
* Remove some excess newlines (Liviu)
* Update comment for > 64 modifiers (Liviu)

v4: Minor comment adjustments (Liviu)

v5: Some new platforms added due to rebase

v6: Add some missed plane inits (or maybe they're new - who knows at
this point) (Daniel)

Signed-off-by: Ben Widawsky <[email protected]>
Reviewed-by: Daniel Stone <[email protected]> (v2)
Reviewed-by: Liviu Dudau <[email protected]>
Signed-off-by: Daniel Stone <[email protected]>

drm/msm: Convert to use new iterator macros, v2.

for_each_obj_in_state is about to be removed, so convert
to the new iterator macros.

Just like in omap, use crtc_state->active instead of
crtc_state->enable when waiting for completion.

Changes since v1:
- Fix compilation.

Signed-off-by: Maarten Lankhorst <[email protected]>
Cc: Rob Clark <[email protected]>
Cc: Archit Taneja <[email protected]>
Cc: Vincent Abriou <[email protected]>
Cc: Maarten Lankhorst <[email protected]>
Cc: Russell King <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Markus Elfring <[email protected]>
Cc: Sushmita Susheelendra <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Daniel Vetter <[email protected]>
Tested-by: Archit Taneja <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/nouveau: Convert nouveau to use new iterator macros, v2.

Use the new atomic iterator macros, the old ones are about to be
removed. With the new macros, it's more easy to get old and new state so
get them from the macros instead of from obj->state.

Changes since v1:
- Don't mix up old and new state. (danvet)
- Rebase on top of interruptible swap_state changes.

Signed-off-by: Maarten Lankhorst <[email protected]>
Cc: Ben Skeggs <[email protected]>
Cc: [email protected]
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Daniel Vetter <[email protected]>

drm/omapdrm: Fix omap_atomic_wait_for_completion

Use the new iterator macro and look for crtc_state->active instead of
enable, only crtc_state->active implies that vblanks will happen.

Signed-off-by: Maarten Lankhorst <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]

drm/atomic: Use new iterator macros in drm_atomic_helper_wait_for_flip_done, again.

for_each_obj_in_state is about to be removed, so use the correct new
iterator macro.

I renamed the variable to 'unused', but forgot to convert
drm_atomic_helper_wait_for_flip_done to the new iterator macro,
so make it work this time.

Signed-off-by: Maarten Lankhorst <[email protected]>
Cc: Daniel Vetter <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Sean Paul <[email protected]>
Cc: David Airlie <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Daniel Vetter <[email protected]>

dma-buf/sw_sync: clean up list before signaling the fence

If userspace already dropped its own reference by closing the sw_sync
fence fd we might end up in a deadlock where
dma_fence_is_signaled_locked() will trigger the release of the fence and
thus try to hold the lock to remove the fence from the list.

dma_fence_is_signaled_locked() tries to release/free the fence and hold
the lock in the process.

We fix that by changing the order operation and clean up the list and
rb-tree first.

v2: Drop fence get/put dance and manipulate the list first (Chris Wilson)

Cc: Chris Wilson <[email protected]>
Signed-off-by: Gustavo Padovan <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]