Merge pull request #1857 from padre-lacroix/bandwidthd

Addition of bandwidthd from the oldpackages

Merge pull request #1861 from hansmi/master

[Unbound] Update to 1.5.5

[Unbound] Update to 1.5.5

Bump unbound to version 1.5.5 released on October 6, 2015.

Signed-off-by: Michael Hanselmann <[email protected]>

Addition of bandwidthd from the oldpackages

Signed-off-by: Jean-Michel Lacroix [email protected]

Merge pull request #1858 from oneru/patch-1

Fwknop: Fix setting getting overwritten

chrony: import from oldpackages

Signed-off-by: Miroslav Lichvar <[email protected]>

Merge pull request #1766 from hnyman/fix-collectd-dns

collectd: Delay first data read cycle by 1s

Merge pull request #1799 from luizluca/sane

sane-backends: import from oldpackages (v2)

Merge pull request #1800 from TuxCoder/master

chaosvpn: add new package

Fwknop: Fix setting getting overwritten

A typo in the init file was causing a certain setting to be overwritten on every daemon start.

Signed-off-by: Jonathan Bennett <[email protected]>

Merge pull request #1849 from drizzt/master

fwknop: fix building without gpg

Merge pull request #1806 from ryzhovau/smstools3-compile-flags

smstools3: fix CFLAGS and LFLAGS

ethtool: update to v4.2

Signed-off-by: Matthias Schiffer <[email protected]>

sane-backends: import from oldpackages and update

Changes since oldpackages:
- updated to 1.0.25
  * most of openwrt patches are upstreamed now
- cups dependency was completely removed
- small musl patch
- small uclibc patch
- removed link to extra libraries in libsane (used only
  for preload backends)
- sane-libs and sane-backends merged and exploded into
  individual packages for each backend:
  * libsane for sane library (which backends should dep on)
  * sane-daemon for saned daemon
  * sane-xxx for sane backend for xxx
  ** each backend has its own custom dep libraries
  * sane-backends-all (with no files) that deps on all backends
  * sane-qcam is only available for x86/x86_64
  ** other archs does not implement inb/outb (at least in musl)

Now it is possible to use SANE with much less FS space (KB
instead of MB).

Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>

fwknop: fix building without gpg

unrar: update to v5.3.5

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

flashrom: make flashrom-full the default variant, remove empty dependencies

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

dump1090: update to latest version

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

add dfu-programmer

dfu-programmer is a Device Firmware Update based USB programmer for
Atmel chips with a USB bootloader. It's comparable to avrdude, but
optimized for Atmel chips with integrated USB DFU Bootloader.

Signed-off-by: Stefan Hellermann <[email protected]>

ocserv: updated to 0.10.9

Signed-off-by: Nikos Mavrogiannopoulos <[email protected]>

collectd: Delay first data read cycle by 1s

Some collectd plugins launch third-party plugins that have variation in
initialisation time (like libpcap). Recently (since kernel bump to 4.1)
the DNS plugin has been causing collectd to crash semi-randomly at startup
on MIPS based WNDR3700.

Debugging led to realisation that the DNS plugin seems to require at least
0.1s time to start, before the first data reading attempt starts.

By default, the first data read cycle starts immediately, while apaprently
some of the plugins may still be asyncronously initialising. To make things
safe, this patch adds 1 second delay before the first data read cycle.

Signed-off-by: Hannu Nyman <[email protected]>

all: get rid of kmod-ipv6 dependencies

Signed-off-by: Steven Barth <[email protected]>

Merge pull request #1837 from cyanidium/master

nut: add dev headers, nut-web-cgi and nut-avahi-service, bugfix

Merge pull request #1843 from oskar456/aiccugnutls

aiccu: split into default and gnutls variant

aiccu: split into default and gnutls variant

Signed-off-by: Ondřej Caletka <[email protected]>

lvm2: update to version 2.02.132

Signed-off-by: Daniel Golle <[email protected]>

perl-parse-recdescent: Update to 1.967013

Signed-off-by: Marcel Denia <[email protected]>

shairport-sync: fix build when both variants are selected

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

flashrom: switch to build variants instead of config options

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

glib2: update to 2.44.1

Signed-off-by: Peter Wagner <[email protected]>

Merge pull request #1836 from zorun/master

bmon: Adapt to libnl package split, only depend on required parts

nut: add dev headers, nut-web-cgi and nut-avahi-service, bugfix

Headers are required by collectd as mentioned in #1801. This is the nut portion based on dwmw2@d636841cd1d1dfab04cb509520c082738ddfb2ea
Happy to merge with 15.05 as per #1803.
Signed-off-by: David Woodhouse <[email protected]>
[[email protected]: condensed InstallDev lines]

Added package nut-web-cgi based on demorfi@7e340f47944ff4a9c49d3b1dc6c1d9d965cd344c. Closes #1614.
Pending signoff by @demorfi
[[email protected]: simplified implementation, no changes to Config.in]

Added package nut-avahi-service similar to other implementations in #618
Bugfix to remove redundant NUT_DRIVER_SERIAL config
Bugfix to make UPSLOG config actually install (requires PKG_RELEASE bump)
Some code tidy-ups
Signed-off-by: Martin Rowe <[email protected]>

Merge pull request #1827 from openwrt-es/shairport-sync-next

shairport-sync: update to latest version

bmon: Adapt to libnl package split, only depend on required parts

Signed-off-by: Baptiste Jonglez <[email protected]>

Merge pull request #1825 from twolife/master

aiccu: enable GnuTLS support

Merge pull request #1816 from ollie27/mjpg-streamercambozola

mjpg-streamer: only download cambozola if it's required

Merge pull request #1828 from msva/patch-2

zsh: bump to 5.1.1

zsh: bump to 5.1.1

Signed-off-by: Vadim A. Misbakh-Soloviov <[email protected]>

git: update to 2.6.0

Signed-off-by: Peter Wagner <[email protected]>

nfs-kernel-server: update to 1.3.3

Signed-off-by: Peter Wagner <[email protected]>

pulseaudio: update to 7.0

Signed-off-by: Peter Wagner <[email protected]>

Merge pull request #1805 from stefanhorning/ddns_service

ddns: Added schokokeks.org to ddns services

Merge pull request #1812 from MikePetullo/grilo

grilo: add new package

Merge pull request #1813 from MikePetullo/grilo-plugins

grilo-plugins: add new package

dbus: bump to 1.10.0

Signed-off-by: Steven Barth <[email protected]>

Merge pull request #1830 from commodo/ovs-2.4.0-released

openvswitch: use released version 2.4.0

Merge pull request #1831 from commodo/aircrack-ng-libnl-update-fix

aircrack-ng: use libnl-genl

Merge pull request #1834 from Wedmer/master

[utils/zoneinfo] Updated to the latest release.

[utils/zoneinfo] Updated to the latest release.
The 2015g release of the tz code and data is available.  It reflects the
following changes, which were either circulated on the tz mailing list
or are relatively minor technical or administrative changes:

   Changes affecting future time stamps

     Turkey's 2015 fall-back transition is scheduled for Nov. 8, not
Oct. 25.
     (Thanks to Fatih.)

     Norfolk moves from +1130 to +1100 on 2015-10-04 at 02:00 local time.
     (Thanks to Alexander Krivenyshev.)

     Fiji's 2016 fall-back transition is scheduled for January 17, not 24.
     (Thanks to Ken Rylander.)

     Fort Nelson, British Columbia will not fall back on 2015-11-01. It has
     effectively been on MST (-0700) since it advanced its clocks on
2015-03-08.
     New zone America/Fort_Nelson.  (Thanks to Matt Johnson.)

   Changes affecting past time stamps

     Norfolk observed DST from 1974-10-27 02:00 to 1975-03-02 02:00.

   Changes affecting code

     localtime no longer mishandles America/Anchorage after 2037.
     (Thanks to Bradley White for reporting the bug.)

     On hosts with signed 32-bit time_t, localtime no longer mishandles
     Pacific/Fiji after 2038-01-16 14:00 UTC.

     The localtime module allows the variables 'timezone', 'daylight',
     and 'altzone' to be in common storage shared with other modules,
     and declares them in case the system <time.h> does not.
     (Problems reported by Kees Dekker.)

     On platforms with tm_zone, strftime.c now assumes it is not NULL.
     This simplifies the code and is consistent with zdump.c.
     (Problem reported by Christos Zoulas.)

   Changes affecting documentation

    The tzfile man page now documents that transition times denote the
    starts (not the ends) of the corresponding time periods.
    (Ambiguity reported by Bill Seymour.)

Signed-off-by: Vladimir Ulrich <[email protected]>

cgi-io: add a small helper cgi that can be used by RPCD based UIs

Signed-off-by: John Crispin <[email protected]>

spi-tools: add new package

this package adds 2 tools that can be used to control spidev devices from userland

Signed-off-by: John Crispin <[email protected]>

Merge pull request #1835 from hnyman/collectd-fix-parallel

collectd: backport parallel build fix from upstream

collectd: backport parallel build fix from upstream

Backport a fix for parallel build from upstream,
where it has been commited to both trunk and 5.5 branch.

https://github.com/collectd/collectd/issues/1146
https://github.com/collectd/collectd/commit/780e6a76021a240e95007a04b723d827120afa95

Signed-off-by: Hannu Nyman <[email protected]>

openvswitch: use released version 2.4.0

The previous version was an unreleased one from the OVS trunk.
This one is the released version, described here:
  http://openvswitch.org/pipermail/announce/2015-August/000078.html

Signed-off-by: Alexandru Ardelean <[email protected]>

aircrack-ng: use libnl-genl

Adding libnl-core and libnl-genl as deps.

Signed-off-by: Alexandru Ardelean <[email protected]>

xl2tpd: bump version

The update is mainly for addressing some memory corruption and segementation
faults issues observed when running xl2tpd in OpenWrt.  The relevant upstream
pull request was at link [1]

 [1] Devel fix valgrind #77, https://github.com/xelerance/xl2tpd/pull/77

Signed-off-by: Yousong Zhou <[email protected]>

u2pnpd: add new package

u²pnpd announces a device as UPnP basic device on the
network so that an user could easily find it. It tries
to detect various system information automatically, however
everything can be overridden by UCI settings.

Signed-off-by: Michael Heimpold <[email protected]>

collectd: disable perl bindings from dev host

if a user's env has PERL_MM_OPT defined collect will fail to build. Adding
--with-perl-bindings="" will override this env var.

Signed-off-by: Tim Harvey <[email protected]>

Merge pull request #1796 from kdarbyshirebryant/collectdnetlink

collectd: netlink module re-enabled

shairport-sync: update to latest version

- update to latest (2.4.1) version
- add support for config files
- switch uci to config files
- based on https://github.com/openwrt/packages/pull/1815
- merge maintainers
- add openssl/polarssl build variants

Signed-off-by: Mike Brady <[email protected]>
Signed-off-by: Álvaro Fernández Rojas <[email protected]>

libcoap: Add new package

Signed-off-by: Anton Glukhov <[email protected]>

dump1090: remove librtldr dependency for view1090 and clean up Makefile

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

Merge pull request #1797 from mhei/fix-open-plc-utils

open-plc-utils: upgrade to latest git revision and fix compilation

aiccu: enable GnuTLS support

shairplay: update to latest version

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

dump1090: switch to mutability repo, make view1090 a separate package

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

pciutils: update to v3.4.0

Signed-off-by: Álvaro Fernández Rojas <[email protected]>

python: fix cross-compiling C++ modules.

Signed-off-by: Attila Lendvai <[email protected]>

mjpg-streamer: only download cambozola if it's required

Signed-off-by: Oliver Middleton <[email protected]>

squid: bump version to 3.5.9

Signed-off-by: Marko Ratkaj <[email protected]>

lxc: bump version to 1.1.3

Signed-off-by: Marko Ratkaj <[email protected]>

file: bump version to 5.25

Signed-off-by: Marko Ratkaj <[email protected]>

e2guardian: bump version to 3.2.0

Signed-off-by: Marko Ratkaj <[email protected]>

ddns: Added schokokeks.org service. Signed-off-by: Stefan Horning <[email protected]>

grilo-plugins: add new package

Signed-off-by: W. Michael Petullo <[email protected]>

grilo: add new package

Signed-off-by: W. Michael Petullo <[email protected]>

Merge pull request #1810 from toxxin/add-canfestival-library

libcanfestival: add new package

Canfestival library: add new package

Signed-off-by: Anton Glukhov <[email protected]>

smstools3: fix CFLAGS and LFLAGS

Signed-off-by: Alexander Ryzhov <[email protected]>

perl: Bump PKG_RELEASE

Signed-off-by: Marcel Denia <[email protected]>

perl: Reorganize patches

The old scheme didn't make any sense...not that there was a scheme really.

Signed-off-by: Marcel Denia <[email protected]>

perl: Remove microperl caretx dependency patch

This will make microperl unable to build. That's okay, since we haven't
been building it for quite a while now.

Signed-off-by: Marcel Denia <[email protected]>

perl: Invert perlbase-essential/perlbase-config circular dependency solution

perlbase-essential and perlbase-config depend on functionality from
each other. Previously, this was solved by just making perlbase-config depend
on perlbase-essential.
However, since a simple "use lib" is enough to trigger pulling in Config, this
approach doesn't seem to make much sense. So let's just make perlbase-essential
depend on perlbase-config instead.
This pulls in perlbase-config as a dependency to pretty much every Perl package,
so in the future we might want to just merge Config into perlbase-essential.

Thanks to Robert Högberg for spotting this.

Signed-off-by: Marcel Denia <[email protected]>

libtasn1: updated to 4.7

Signed-off-by: Nikos Mavrogiannopoulos <[email protected]>

gnutls: updated to 3.4.5

Signed-off-by: Nikos Mavrogiannopoulos <[email protected]>

radcli: updated to 1.2.3

Signed-off-by: Nikos Mavrogiannopoulos <[email protected]>

mosquitto: upgrade to version 1.4.4

Drop patch now included upstream.

More information: http://mosquitto.org/2015/09/version-1-4-4-released/

Signed-off-by: Karl Palsson <[email protected]>

Merge pull request #1770 from robho/perlbase-data_needs_more_dependencies

perlbase-data: Add dependency on perlbase-bytes

chaosvpn: add new package

Signed-off-by: Norbert Summer <[email protected]>

Merge pull request #1788 from Dismounted/patch-1

nut: Fix required dependencies.

perlbase-data: Add dependency on perlbase-bytes

Dumper.pm, included in perlbase-data, uses module bytes, so add dependency
on openwrt package perlbase-bytes.

Signed-off-by: Robert Högberg <[email protected]>

Merge pull request #1789 from MikePetullo/scapy

scapy: add new package

Merge pull request #1792 from MikePetullo/krb5

krb5: update to 1.13.2

canutils: add new package (fixes #1785)

Signed-off-by: Anton Glukhov <[email protected]>
[Minor fixes]
Signed-off-by: Michael Heimpold <[email protected]>

open-plc-utils: upgrade to latest git revision and fix compilation

Buildbots are reporting the following error:
../mme/ARPCPrint.c: In function 'ARPCPrint':
../mme/ARPCPrint.c:123:2: error: incompatible type for argument 3 of 'vfprintf'
  vfprintf (fp, (char *)(&data->LIST [LE16TOH (data->STROFFSET)]), (void *)(&data->LIST [LE16TOH (data->ARGOFFSET)]));
  ^
In file included from /store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/fortify/stdio.h:20:0,
                 from ../mme/ARPCPrint.c:68:
/store/buildbot/slave/mxs/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_musl-1.1.11_eabi/include/stdio.h:108:5: note: expected '__isoc_va_list' but argument is of type 'void *'

Fix this by definition __UCLIBC__ to enable a workaround for this
issue.

While at, switch to HTTPS URL for cloning the git repo.

Signed-off-by: Michael Heimpold <[email protected]>

collectd: netlink module remove ip package dependency

Signed-off-by: Kevin Darbyshire-Bryant <[email protected]>

Merge pull request #1795 from MikePetullo/lighttpd

lighttpd: update to 1.4.37

collectd: netlink module re-enabled

Collectd netlink module re-enabled and libnl library dependency
satisfied with mini libmnl.

$(eval $(call BuildPlugin,netlink,netlink
input,netlink,+PACKAGE_collectd-mod-netlink:ip
+PACKAGE_collectd-mod-netlink:libmnl))

Signed-off-by: Kevin Darbyshire-Bryant <[email protected]>

lighttpd: update to 1.4.37

Signed-off-by: W. Michael Petullo <[email protected]>

krb5: update to 1.13.2

Signed-off-by: W. Michael Petullo <[email protected]>