x86: Remove left over system_64.h

Left-over from the x86 merge ...

Signed-off-by: Yinghai Lu <[email protected]>
LKML-Reference: <4D3E23D1.7010405@kernel.org>
Signed-off-by: Ingo Molnar <[email protected]>

x86-64: Don't use pointer to out-of-scope variable in dump_trace()

In arch/x86/kernel/dumpstack_64.c::dump_trace() we have this code:

...
   if (!stack) {
   unsigned long dummy;
   stack = &dummy;
   if (task && task != current)
   stack = (unsigned long *)task->thread.sp;
   }

   bp = stack_frame(task, regs);
   /*
    * Print function call entries in all stacks, starting at the
    * current stack address. If the stacks consist of nested
    * exceptions
    */
   tinfo = task_thread_info(task);

   for (;;) {
   char *id;
   unsigned long *estack_end;
   estack_end = in_exception_stack(cpu, (unsigned long)stack,
   &used, &id);
...

You'll notice that we assign to 'stack' the address of the variable
'dummy' which is only in-scope inside the 'if (!stack)'. So when we later
access stack (at the end of the above, and assuming we did not take the
'if (task && task != current)' branch) we'll be using the address of a
variable that is no longer in scope. I believe this patch is the proper
fix, but I freely admit that I'm not 100% certain.

Signed-off-by: Jesper Juhl <[email protected]>
LKML-Reference: <alpine.LNX.2.00.1101242232590[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>

fix a shutdown regression in intel_idle

Fix a shutdown regression caused by 2a2d31c8dc6f ("intel_idle: open
broadcast clock event").  The clockevent framework can automatically
shutdown broadcast timers for hotremove CPUs.  And we get a shutdown
regression when we shutdown broadcast timer for hot remove CPU, so just
delete some code.

Also fix some section mismatch.

Reported-by: Ari Savolainen <[email protected]>
Signed-off-by: Shaohua Li <[email protected]>
Tested-by: Linus Torvalds <[email protected]>
Cc: [email protected]
Signed-off-by: Linus Torvalds <[email protected]>

Merge branch 'omap-fixes-for-linus' of git://git./linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  omap: DMA: clear interrupt status correctly
  OMAP3: Devkit8000: Fix tps65930 pullup/pulldown configuration
  arm: omap3: cm-t3517: minor comment fix
  arm: omap3: cm-t3517: rtc fix
  omap1: Fix sched_clock implementation when both MPU timer and 32K timer are used
  omap1: Fix booting for 15xx and 730 with omap1_defconfig
  omap1: Fix sched_clock for the MPU timer
  OMAP: PRCM: remove duplicated headers
  OMAP4: clockdomain: bypass unimplemented wake-up dependency functions on OMAP4
  OMAP: counter_32k: init clocksource as part of machine timer init

Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix time function double declaration with glibc
  perf tools: Fix build by checking if extra warnings are supported
  perf tools: Fix build when using gcc 3.4.6
  perf tools: Add missing header, fixes build
  perf tools: Fix 64 bit integer format strings
  perf test: Fix build on older glibcs
  perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/
  perf test: Use cpu_map->[cpu] when setting affinity
  perf symbols: Fix annotation of thumb code
  perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat
  powerpc, perf: Fix frequency calculation for overflowing counters (FSL version)
  perf: Fix perf_event_init_task()/perf_event_free_task() interaction
  perf: Fix find_get_context() vs perf_event_exit_task() race

Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  RTC: Remove Kconfig symbol for UIE emulation
  RTC: Properly handle rtc_read_alarm error propagation and fix bug
  RTC: Propagate error handling via rtc_timer_enqueue properly
  acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails
  rtc: Cleanup removed UIE emulation declaration
  hrtimers: Notify hrtimer users of switches to NOHZ mode

Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix poor interactivity on UP systems due to group scheduler nice tune bug

Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix jump label with RO/NX module protection crash
  x86, hotplug: Fix powersavings with offlined cores on AMD
  x86, mcheck, therm_throt.c: Export symbol platform_thermal_notify to allow coretemp to handler intr
  x86: Use asm-generic/cacheflush.h
  x86: Update CPU cache attributes table descriptors

sched: Fix poor interactivity on UP systems due to group scheduler nice tune bug

Michael Witten and Christian Kujau reported that the autogroup
scheduling feature hurts interactivity on their UP systems.

It turns out that this is an older bug in the group scheduling code,
and the wider appeal provided by the autogroup feature exposed it
more prominently.

When on UP with FAIR_GROUP_SCHED enabled, tune shares
only affect tg->shares, but is not reflected in
tg->se->load. The reason is that update_cfs_shares()
does nothing on UP.

So introduce update_cfs_shares() for UP && FAIR_GROUP_SCHED.

This issue was found when enable autogroup scheduling was enabled,
but it is an older bug that also exists on cgroup.cpu on UP.

Reported-and-Tested-by: Michael Witten <[email protected]>
Reported-and-Tested-by: Christian Kujau <[email protected]>
Signed-off-by: Yong Zhang <[email protected]>
Acked-by: Pekka Enberg <[email protected]>
Acked-by: Mike Galbraith <[email protected]>
Acked-by: Peter Zijlstra <[email protected]>
Cc: Linus Torvalds <[email protected]>
LKML-Reference: <20110124073352[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

Merge branch 'BUG_ON' of git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* 'BUG_ON' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  Remove MAYBE_BUILD_BUG_ON
  BUILD_BUG_ON: make it handle more cases

Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  module: fix missing semicolons in MODULE macro usage
  param: add null statement to compiled-in module params
  module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n
  module: show version information for built-in modules in sysfs

Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  selinux: return -ENOMEM when memory allocation fails
  tpm: fix panic caused by "tpm: Autodetect itpm devices"
  TPM: Long default timeout fix
  trusted keys: Fix a memory leak in trusted_update().
  keys: add trusted and encrypted maintainers
  encrypted-keys: rename encrypted_defined files to encrypted
  trusted-keys: rename trusted_defined files to trusted

Remove MAYBE_BUILD_BUG_ON

Now BUILD_BUG_ON() can handle optimizable constants, we don't need
MAYBE_BUILD_BUG_ON any more.

Signed-off-by: Rusty Russell <[email protected]>

BUILD_BUG_ON: make it handle more cases

BUILD_BUG_ON used to use the optimizer to do code elimination or fail
at link time; it was changed to first the size of a negative array (a
nicer compile time error), then (in
8c87df457cb58fe75b9b893007917cf8095660a0) to a bitfield.

This forced us to change some non-constant cases to MAYBE_BUILD_BUG_ON();
as Jan points out in that commit, it didn't work as intended anyway.

bitfields: needs a literal constant at parse time, and can't be put under
"if (__builtin_constant_p(x))" for example.
negative array: can handle anything, but if the compiler can't tell it's
a constant, silently has no effect.
link time: breaks link if the compiler can't determine the value, but the
linker output is not usually as informative as a compiler error.

If we use the negative-array-size method *and* the link time trick,
we get the ability to use BUILD_BUG_ON() under __builtin_constant_p()
branches, and maximal ability for the compiler to detect errors at
build time.

We also document it thoroughly.

Signed-off-by: Rusty Russell <[email protected]>
Cc: Jan Beulich <[email protected]>
Acked-by: Hollis Blanchard <[email protected]>

module: fix missing semicolons in MODULE macro usage

You always needed them when you were a module, but the builtin versions
of the macros used to be more lenient.

Reported-by: Stephen Rothwell <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>

param: add null statement to compiled-in module params

Add an unused struct declaration statement requiring a
terminating semicolon to the compile-in case to provoke an
error if __MODULE_INFO() is used without the terminating
semicolon. Previously MODULE_ALIAS("foo") (no semicolon)
compiled fine if MODULE was not selected.

Cc: Dan Carpenter <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>

module: fix linker error for MODULE_VERSION when !MODULE and CONFIG_SYSFS=n

lib/built-in.o:(__modver+0x8): undefined reference to `__modver_version_show'
lib/built-in.o:(__modver+0x2c): undefined reference to `__modver_version_show'

Simplest to just not emit anything: if they've disabled SYSFS they probably
want the smallest kernel possible.

Reported-by: Randy Dunlap <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>

module: show version information for built-in modules in sysfs

Currently only drivers that are built as modules have their versions
shown in /sys/module/<module_name>/version, but this information might
also be useful for built-in drivers as well. This especially important
for drivers that do not define any parameters - such drivers, if
built-in, are completely invisible from userspace.

This patch changes MODULE_VERSION() macro so that in case when we are
compiling built-in module, version information is stored in a separate
section. Kernel then uses this data to create 'version' sysfs attribute
in the same fashion it creates attributes for module parameters.

Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Rusty Russell <[email protected]>

selinux: return -ENOMEM when memory allocation fails

Return -ENOMEM when memory allocation fails in cond_init_bool_indexes,
correctly propagating error code to caller.

Signed-off-by: Davidlohr Bueso <[email protected]>
Signed-off-by: James Morris <[email protected]>

tpm: fix panic caused by "tpm: Autodetect itpm devices"

commit 3f0d3d016d89a5efb8b926d4707eb21fa13f3d27 adds a check for
PNP device id to the common tpm_tis_init() function, which in some
cases (force=1) will be called without the device being a member of
a pnp_dev. Oopsing and panics ensue.

Move the test up to before the call to tpm_tis_init(), since it
just modifies a global variable anyway.

Signed-off-by: Olof Johansson <[email protected]>
Acked-by: Rajiv Andrade <[email protected]>
Signed-off-by: James Morris <[email protected]>

TPM: Long default timeout fix

If duration variable value is 0 at this point, it's because
chip->vendor.duration wasn't filled by tpm_get_timeouts() yet.
This patch sets then the lowest timeout just to give enough
time for tpm_get_timeouts() to further succeed.

This fix avoids long boot times in case another entity attempts
to send commands to the TPM when the TPM isn't accessible.

Signed-off-by: Rajiv Andrade <[email protected]>
Signed-off-by: James Morris <[email protected]>

trusted keys: Fix a memory leak in trusted_update().

One failure path in security/keys/trusted.c::trusted_update() does
not free 'new_p' while the others do. This patch makes sure we also free
it in the remaining path (if datablob_parse() returns different from
Opt_update).

Signed-off-by: Jesper Juhl <[email protected]>
Signed-off-by: James Morris <[email protected]>

keys: add trusted and encrypted maintainers

Add myself and David Safford as maintainers for trusted/encrypted keys.

Signed-off-by: Mimi Zohar <[email protected]>
Acked-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>

encrypted-keys: rename encrypted_defined files to encrypted

Rename encrypted_defined.c and encrypted_defined.h files to encrypted.c and
encrypted.h, respectively. Based on request from David Howells.

Signed-off-by: Mimi Zohar <[email protected]>
Acked-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>

trusted-keys: rename trusted_defined files to trusted

Rename trusted_defined.c and trusted_defined.h files to trusted.c and
trusted.h, respectively. Based on request from David Howells.

Signed-off-by: Mimi Zohar <[email protected]>
Acked-by: David Howells <[email protected]>
Signed-off-by: James Morris <[email protected]>

x86: Fix jump label with RO/NX module protection crash

If we use jump table in module init, there are marked
as removed in __jump_table section after init is done.

But we already applied ro permissions on the module, so
we can't modify a read only section (crash in
remove_jump_label_module_init).

Make the __jump_table section rw.

Signed-off-by: Matthieu CASTET <[email protected]>
Cc: Xiaotian Feng <[email protected]>
Cc: Jason Baron <[email protected]>
Cc: Steven Rostedt <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Siarhei Liakh <[email protected]>
Cc: Xuxian Jiang <[email protected]>
Cc: James Morris <[email protected]>
Cc: Rusty Russell <[email protected]>
Cc: Dave Jones <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Andrew Morton <[email protected]>
LKML-Reference: <4D3C3F20.7030203@free.fr>
Signed-off-by: Ingo Molnar <[email protected]>

fs: fix new dcache.c kernel-doc warnings

Fix new fs/dcache.c kernel-doc warnings:

  Warning(fs/dcache.c:184): No description found for parameter 'dentry'
  Warning(fs/dcache.c:296): No description found for parameter 'parent'
  Warning(fs/dcache.c:1985): No description found for parameter 'dparent'
  Warning(fs/dcache.c:1985): Excess function parameter 'parent' description in 'd_validate'

Signed-off-by: Randy Dunlap <[email protected]>
Cc: Alexander Viro <[email protected]>
Cc: Nick Piggin <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

rapidio: fix new kernel-doc warnings

Fix new rapidio kernel-doc warnings:

  Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev'
  Warning(drivers/rapidio/rio-scan.c:953): No description found for parameter 'prev_port'

Signed-off-by: Randy Dunlap <[email protected]>
Cc: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

docbook: fix broken serial to tty/serial movement

Fix move of drivers/serial/ to drivers/tty/, where it broke
one of the docbook files:

  docproc: drivers/serial/serial_core.c: No such file or directory

Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

perf tools: Fix time function double declaration with glibc

It's enough to include the local "debug.h" file to trigger it.

man time reveals this is already declared in glibc:

time - get time in seconds
-> rename the variable.

Cc: Ingo Molnar <[email protected]>
Cc: [email protected]
LPU-Reference: <1295620209[email protected]>
Signed-off-by: Thomas Renninger <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

perf tools: Fix build by checking if extra warnings are supported

The -Wstack-protector and -Wvolatile-register-var warnings, for
instance, are not supported by gcc 3.4.6.

So fix by doing the same check we already do for -fstack-protector-all.

With this and the other patches in this series, perf builds unmodified
on, for instance, RHEL4.

Cc: Eric Dumazet <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

perf tools: Fix build when using gcc 3.4.6

[acme@localhost linux]$ make O=~acme/git/build/perf -C tools/perf
make: Entering directory `/home/acme/git/linux/tools/perf'
Makefile:526: No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev
Makefile:582: newt not found, disables TUI support. Please install newt-devel or libnewt-dev
    CC /home/acme/git/build/perf/builtin-annotate.o
In file included from builtin-annotate.c:23:
util/parse-events.h:26: warning: declaration of 'evsel_list' shadows a global declaration
util/parse-events.h:12: warning: shadowed declaration is here
make: *** [/home/acme/git/build/perf/builtin-annotate.o] Error 1
make: Leaving directory `/home/acme/git/linux/tools/perf'
[acme@localhost linux]$ gcc --version | head -1
gcc (GCC) 3.4.6 20060404 (Red Hat 3.4.6-11)
[acme@localhost linux]$

Fix it by renaming the parameter to evlist.

Cc: Eric Dumazet <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

perf tools: Add missing header, fixes build

We need the definiton for __always_inline in bitops.h to fix the build
on distros where it isn't available or compiler.h doesn't get included
indirectly.

One of the fixes needed to build perf on RHEL4 systems, for instance.

Cc: Eric Dumazet <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

perf tools: Fix 64 bit integer format strings

Using %L[uxd] has issues in some architectures, like on ppc64.  Fix it
by making our 64 bit integers typedefs of stdint.h types and using
PRI[ux]64 like, for instance, git does.

Reported by Denis Kirjanov that provided a patch for one case, I went
and changed all cases.

Reported-by: Denis Kirjanov <[email protected]>
Tested-by: Denis Kirjanov <[email protected]>
LKML-Reference: <20110120093246[email protected]>
Cc: Denis Kirjanov <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Pingtian Han <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Tom Zanussi <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

perf test: Fix build on older glibcs

Where we don't have CPU_ALLOC & friends. As the tools are being used in older
distros where the only allowed change are to replace the kernel, like RHEL4 and
5.

Reported-by: Eric Dumazet <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Frederic Weisbecker <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Paul Mackerras <[email protected]>
Cc: Stephane Eranian <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

Merge branch 'perf/urgent' of git://git./linux/kernel/git/acme/linux-2.6 into perf/urgent

Linux 2.6.38-rc2

x86, hotplug: Fix powersavings with offlined cores on AMD

ea53069231f9317062910d6e772cca4ce93de8c8 made a CPU use monitor/mwait
when offline. This is not the optimal choice for AMD wrt to powersavings
and we'd prefer our cores to halt (i.e. enter C1) instead. For this, the
same selection whether to use monitor/mwait has to be used as when we
select the idle routine for the machine.

With this patch, offlining cores 1-5 on a X6 machine allows core0 to
boost again.

[ hpa: putting this in urgent since it is a (power) regression fix ]

Reported-by: Andreas Herrmann <[email protected]>
Cc: [email protected] # 37.x
Cc: H. Peter Anvin <[email protected]>
Cc: Arjan van de Ven <[email protected]>
Cc: Len Brown <[email protected]>
Cc: Venkatesh Pallipadi <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
LKML-Reference: <1295534572[email protected]>
Signed-off-by: H. Peter Anvin <[email protected]>

Merge branch 'media_fixes' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits)
  [media] staging/lirc: fix mem leaks and ptr err usage
  [media] hdpvr: reduce latency of i2c read/write w/recycled buffer
  [media] hdpvr: enable IR part
  [media] rc/mceusb: timeout should be in ns, not us
  [media] v4l2-device: fix 'use-after-freed' oops
  [media] v4l2-dev: don't memset video_device.dev
  [media] zoran: use video_device_alloc instead of kmalloc
  [media] w9966: zero device state after a detach
  [media] v4l: Fix a use-before-set in the control framework
  [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h
  [media] DocBook/v4l: update V4L2 revision and update copyright years
  [media] DocBook/v4l: fix validation error in dev-rds.xml
  [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs
  [media] v4l2-ctrls: fix missing 'read-only' check
  [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c
  [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71
  [media] lirc_zilog: Update TODO.lirc_zilog
  [media] lirc_zilog: Add Andy Walls to copyright notice and authors list
  [media] lirc_zilog: Remove useless struct i2c_driver.command function
  [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function
  ...

KEYS: Fix up comments in key management code

Fix up comments in the key management code.  No functional changes.

Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

KEYS: Do some style cleanup in the key management code.

Do a bit of a style clean up in the key management code.  No functional
changes.

Done using:

  perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c
  perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c
  sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c

To remove /*****/ lines, remove comments on the closing brace of a
function to name the function and remove blank lines before the closing
brace of a function.

Signed-off-by: David Howells <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix up CIFSSMBEcho for unaligned access
  cifs: fix unaligned accesses in cifsConvertToUCS
  cifs: clean up unaligned accesses in cifs_unicode.c
  cifs: fix unaligned access in check2ndT2 and coalesce_t2
  cifs: clean up unaligned accesses in validate_t2
  cifs: use get/put_unaligned functions to access ByteCount
  cifs: move time field in cifsInodeInfo
  cifs: TCP_Server_Info diet
  CIFS: Implement cifs_strict_readv (try #4)
  CIFS: Implement cifs_file_strict_mmap (try #2)
  CIFS: Implement cifs_strict_fsync
  CIFS: Make cifsFileInfo_put work with strict cache mode

Merge branch 'fixes-2.6.38' of git://git./linux/kernel/git/tj/percpu

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  x86,percpu: Move out of place 64 bit ops into X86_64 section

Merge branch 'fixes-2.6.38' of git://git./linux/kernel/git/tj/wq

* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: note the nested NOT_RUNNING test in worker_clr_flags() isn't a noop
  workqueue: relax lockdep annotation on flush_work()

Merge branch 'irq-cleanup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits)
  um: Use generic irq Kconfig
  tile: Use generic irq Kconfig
  sparc: Use generic irq Kconfig
  score: Use generic irq Kconfig
  powerpc: Use generic irq Kconfig
  parisc: Use generic irq Kconfig
  mn10300: Use generic irq Kconfig
  microblaze: Use generic irq Kconfig
  m68knommu: Use generic irq Kconfig
  ia64: Use generic irq Kconfig
  frv: Use generic irq Kconfig
  blackfin: Use generic irq Kconfig
  alpha: Use generic irq Kconfig
  genirq: Remove __do_IRQ
  m32r: Convert to generic irq Kconfig
  m32r: Convert usrv platform irq handling
  m32r: Convert opsput_lcdpld irq chip
  m32r: Convert opsput lanpld irq chip
  m32r: Convert opsput pld irq chip
  m32r: Convert opsput irq chip
  ...

Merge branch 'stable/bug-fixes-rc1' of git://git./linux/kernel/git/konrad/xen

* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen: p2m: correctly initialize partial p2m leaf
  xen: fix non-ANSI function warning in irq.c

Merge branches 'fixes' and 'fwnet' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: core: fix unstable I/O with Canon camcorder

* 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: net: is not experimental anymore
  firewire: net: invalidate ARP entries of removed nodes

Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662
  ALSA: HDA: Add SKU ignore for another Thinkpad Edge 14
  ALSA: hda - Fix "unused variable" compile warning
  ALSA: hda - Add quirk for HP Z-series workstation
  Revert "ALSA: HDA: Create mixers on ALC887"
  ASoC: PXA: Fix codec address on Zipit Z2
  ASoC: PXA: Fix jack detection on Zipit Z2
  ASoC: Blackfin: fix DAI/SPORT config dependency issues
  ASoC: Blackfin TDM: use external frame syncs
  ASoC: Blackfin AC97: fix build error after multi-component update
  ASoC: Blackfin TDM: fix missed snd_soc_dai_get_drvdata update
  ASoC: documentation updates
  ALSA: ice1712 delta - initialize SPI clock

Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  powerpc/83xx: fix build failures on dt compatible list.

Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits)
  powerpc/mpic: Fix mask/unmask timeout message
  powerpc/pseries: Add BNX2=m to defconfig
  powerpc: Enable 64kB pages and 1024 threads in pseries config
  powerpc: Disable mcount tracers in pseries defconfig
  powerpc/boot/dts: Install dts from the right directory
  powerpc: machine_check_generic is wrong on 64bit
  powerpc: Check RTAS extended log flag before checking length
  powerpc: Fix corruption when grabbing FWNMI data
  powerpc: Rework pseries machine check handler
  powerpc: Don't silently handle machine checks from userspace
  powerpc: Remove duplicate debugger hook in machine_check_exception
  powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check
  powerpc: Don't force MSR_RI in machine_check_exception
  powerpc: Print 32 bits of DSISR in show_regs
  powerpc/kdump: Disable ftrace during kexec
  powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler
  powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare
  powerpc/kexec: Don't initialise kexec hooks to default handlers
  powerpc/kdump: Remove ppc_md.machine_crash_shutdown
  powerpc/kexec: Remove ppc_md.machine_kexec
  ...

perf: perf_event_exit_task_context: s/rcu_dereference/rcu_dereference_raw/

In theory, almost every user of task->child->perf_event_ctxp[]
is wrong. find_get_context() can install the new context at any
moment, we need read_barrier_depends().

dbe08d82ce3967ccdf459f7951d02589cf967300 "perf: Fix
find_get_context() vs perf_event_exit_task() race" added
rcu_dereference() into perf_event_exit_task_context() to make
the precedent, but this makes __rcu_dereference_check() unhappy.
Use rcu_dereference_raw() to shut up the warning.

Reported-by: Ingo Molnar <[email protected]>
Signed-off-by: Oleg Nesterov <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Paul E. McKenney <[email protected]>
LKML-Reference: <20110121174547[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

perf test: Use cpu_map->[cpu] when setting affinity

When some of CPUs are offline:

 # cat /sys/devices/system/cpu/online
 0,6-31

perf test will fail on #3 testcase:

   3: detect open syscall event on all cpus:
   --- start ---
   perf_evsel__read_on_cpu: expected to intercept 111 calls on cpu 0, got 681
   perf_evsel__read_on_cpu: expected to intercept 112 calls on cpu 1, got 117
   perf_evsel__read_on_cpu: expected to intercept 113 calls on cpu 2, got 118
   perf_evsel__read_on_cpu: expected to intercept 114 calls on cpu 3, got 119
   perf_evsel__read_on_cpu: expected to intercept 115 calls on cpu 4, got 120
   perf_evsel__read_on_cpu: expected to intercept 116 calls on cpu 5, got 121
   perf_evsel__read_on_cpu: expected to intercept 117 calls on cpu 6, got 122
   perf_evsel__read_on_cpu: expected to intercept 118 calls on cpu 7, got 123
   perf_evsel__read_on_cpu: expected to intercept 119 calls on cpu 8, got 124
   perf_evsel__read_on_cpu: expected to intercept 120 calls on cpu 9, got 125
   perf_evsel__read_on_cpu: expected to intercept 121 calls on cpu 10, got 126
   ....

This patch try to use 'cpus->map[cpu]' when setting cpu affinity, and
will check the return code of sched_setaffinity()

LKML-Reference: <20110120114707[email protected]>
Signed-off-by: Han Pingtian <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

perf symbols: Fix annotation of thumb code

In ARM's Thumb mode the bottom bit of the symbol address is set to mark
the function as Thumb; the instructions are in reality 2 or 4 byte on 2
byte alignments, and when the +1 address is used in annotate it causes
objdump to disassemble invalid instructions.

The patch removes that bottom bit during symbol loading.

Many thinks to Dave Martin for comments on an initial version of the
patch.

(For reference this corresponds to this bug
https://bugs.launchpad.net/linux-linaro/+bug/677547 )

Cc: Ingo Molnar <[email protected]>
Cc: Dave Martin <[email protected]>
LKML-Reference: <20110121163922.GA31398@davesworkthinkpad>
Signed-off-by: Dr. David Alan Gilbert <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>

mm: System without MMU do not need pte_mkwrite

The patch "thp: export maybe_mkwrite" (commit 14fd403f2146) breaks
systems without MMU.

Error log:

    CC      arch/microblaze/mm/init.o
  In file included from include/linux/mman.h:14,
                   from arch/microblaze/mm/consistent.c:24:
  include/linux/mm.h: In function 'maybe_mkwrite':
  include/linux/mm.h:482: error: implicit declaration of function 'pte_mkwrite'
  include/linux/mm.h:482: error: incompatible types in assignment

Signed-off-by: Michal Simek <[email protected]>
CC: Andrea Arcangeli <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
CC: Andrew Morton <[email protected]>
CC: Ingo Molnar <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

MAINTAINERS: Update Roland Dreier's email address

The cisco.com address will stop working soon, and besides no one can
remember the second "d" in "rolandd" or how to spell "rdreier."

Signed-off-by: Roland Dreier <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

RTC: Remove Kconfig symbol for UIE emulation

The effect of changing the value of this symbol is gone since 042620a
(RTC: Remove UIE emulation).

Remove symbol too.

Signed-off-by: Uwe Kleine-König <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Richard Cochran <[email protected]>
Cc: John Stultz <[email protected]>
LKML-Reference: <1295625406[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>

RTC: Properly handle rtc_read_alarm error propagation and fix bug

In reviewing cases where the virtualized interfaces didn't propagate
errors properly, I noticed rtc_read_alarm needed fixing. In doing
so I noticed my RTC rework dropped a memset and that the behavior
of rtc_read_alarm shouldn't be conditionalized on the alarm.enabled
flag (as the alarm may be set, but the irqs may be disabled). So
those were corrected as well.

CC: Thomas Gleixner <[email protected]>
Signed-off-by: John Stultz <[email protected]>
LKML-Reference: <1295565973[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>

RTC: Propagate error handling via rtc_timer_enqueue properly

In cases where RTC hardware does not support alarms, the virtualized
RTC interfaces did not have a way to propagate the error up to userland.

This patch extends rtc_timer_enqueue so it catches errors from the hardware
and returns them upwards to the virtualized interfaces. To simplify error
handling, it also internalizes the management of the timer->enabled bit
into rtc_timer_enqueue and rtc_timer_remove.

Also makes rtc_timer_enqueue and rtc_timer_remove static.

Reported-by: David Daney <[email protected]>
Reported-by: Andreas Schwab <[email protected]>
Reported-by: Geert Uytterhoeven <[email protected]>
Diagnosed-by: David Daney <[email protected]>
Tested-by: David Daney <[email protected]>
Signed-off-by: John Stultz <[email protected]>
LKML-Reference: <1295565973[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>

acpi_pm: Clear pmtmr_ioport if acpi_pm initialization fails

If the acpi pm timer throws invalid data, clear pmtmr_ioport
so the pm timer won't accidentally be used.

This was found when using Xen where there is a acpi pm reported,
but gives bogus values, and other code was continuing to try
to use the pm timer after the initialization failed.

[jstultz: Catch additional failure and reword changelog message. ]

Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
Signed-off-by: John Stultz <[email protected]>
LKML-Reference: <1295027246[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>

rtc: Cleanup removed UIE emulation declaration

rtc_dev_update_irq_enable_emul was removed in commit
042620a018afcfba1d678062b62e463b9e43a68d (UIE emulation is
now handled via hrtimer), but the declaration was missed.
This patch cleans it up.

Signed-off-by: John Stultz <[email protected]>
LKML-Reference: <1294939849[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>

xen: p2m: correctly initialize partial p2m leaf

After changing the p2m mapping to a tree by

  commit 58e05027b530ff081ecea68e38de8d59db8f87e0
    xen: convert p2m to a 3 level tree

and trying to boot a DomU with 615MB of memory, the following crash was
observed in the dump:

kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<c0107397>] xen_set_pte+0x27/0x60
*pdpt = 0000000000000000 *pde = 0000000000000000

Adding further debug statements showed that when trying to set up
pfn=0x26700 the returned mapping was invalid.

pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003)
pfn=0x26700 calling set_pte(0xc1fe7800, 0x3)

Although the last_pfn obtained from the startup info is 0x26700, which
should in turn not be hit, the additional 8MB which are added as extra
memory normally seem to be ok. This lead to looking into the initial
p2m tree construction, which uses the smaller value and assuming that
there is other code handling the extra memory.

When the p2m tree is set up, the leaves are directly pointed to the
array which the domain builder set up. But if the mapping is not on a
boundary that fits into one p2m page, this will result in the last leaf
being only partially valid. And as the invalid entries are not
initialized in that case, things go badly wrong.

I am trying to fix that by checking whether the current leaf is a
complete map and if not, allocate a completely new page and copy only
the valid pointers there. This may not be the most efficient or elegant
solution, but at least it seems to allow me booting DomUs with memory
assignments all over the range.

BugLink: http://bugs.launchpad.net/bugs/686692
[v2: Redid a bit of commit wording and fixed a compile warning]

Signed-off-by: Stefan Bader <[email protected]>
Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>

Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Fix deadlock during path resolution

perf: Annotate cpuctx->ctx.mutex to avoid a lockdep splat

Lockdep spotted:

loop_1b_instruc/1899 is trying to acquire lock:
 (event_mutex){+.+.+.}, at: [<ffffffff810e1908>] perf_trace_init+0x3b/0x2f7

but task is already holding lock:
 (&ctx->mutex){+.+.+.}, at: [<ffffffff810eb45b>] perf_event_init_context+0xc0/0x218

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&ctx->mutex){+.+.+.}:
-> #2 (cpu_hotplug.lock){+.+.+.}:
-> #1 (module_mutex){+.+...}:
-> #0 (event_mutex){+.+.+.}:

But because the deadlock would be cpuhotplug (cpu-event) vs fork
(task-event) it cannot, in fact, happen. We can annotate this by giving the
perf_event_context used for the cpuctx a different lock class from those
used by tasks.

Signed-off-by: Peter Zijlstra <[email protected]>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <[email protected]>

x86, mcheck, therm_throt.c: Export symbol platform_thermal_notify to allow coretemp to handler intr

In therm_throt.c, commit
9e76a97efd31a08cb19d0ba12013b8fb4ad3e474 patch doesn't export
the symbol platform_thermal_notify.

Other drivers (e.g. drivers/hwmon/coretemp.c) can not find the
symbol platform_thermal_notify when defining threshould
interrupt handler.

Please apply this patch to allow threshold interrupt handler in
coretemp.

Signed-off-by: Fenghua Yu <[email protected]>
Cc: R Durgadoss <[email protected]>
Cc: [email protected] <[email protected]>
Cc: [email protected] <[email protected]>
Cc: Guenter Roeck <[email protected]>
LKML-Reference: <20110121041239[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

x86: Use asm-generic/cacheflush.h

The implementation of the cache flushing interfaces on the x86
is identical with the default implementation in asm-generic.

Signed-off-by: Akinobu Mita <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: [email protected]
LKML-Reference: <1295523136[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>

um: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: Jeff Dike <[email protected]>

tile: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Chris Metcalf <[email protected]>

sparc: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: "David S. Miller" <[email protected]>

score: Use generic irq Kconfig

No functional change

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Chen Liqin <[email protected]>

powerpc: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Benjamin Herrenschmidt <[email protected]>

parisc: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Kyle McMartin <[email protected]>
Acked-by: James Bottomley <[email protected]>

mn10300: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: David Howells <[email protected]>

microblaze: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Michal Simek <[email protected]>

m68knommu: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Greg Ungerer <[email protected]>

ia64: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Tony Luck <[email protected]>

frv: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: David Howells <[email protected]>

blackfin: Use generic irq Kconfig

No functional change.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Mike Frysinger <[email protected]>

alpha: Use generic irq Kconfig

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Richard Henderson <[email protected]>

genirq: Remove __do_IRQ

All architectures are finally converted. Remove the cruft.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Richard Henderson <[email protected]>
Cc: Mike Frysinger <[email protected]>
Cc: David Howells <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: Greg Ungerer <[email protected]>
Cc: Michal Simek <[email protected]>
Acked-by: David Howells <[email protected]>
Cc: Kyle McMartin <[email protected]>
Acked-by: Benjamin Herrenschmidt <[email protected]>
Cc: Chen Liqin <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Chris Metcalf <[email protected]>
Cc: Jeff Dike <[email protected]>

m32r: Convert to generic irq Kconfig

Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as
we have converted all irq_chip functions.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert usrv platform irq handling

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert opsput_lcdpld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert opsput lanpld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert opsput pld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert opsput irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert oaks32r irq chips

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert mappi3 irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert mappi2 irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert mappi irq chips

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert m32700ut lcdpld irq chip

Convert the irq chip to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert m32700ut lanpld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert m32700ut pld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert m32104ut irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Convert m32104ut irq handling

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

m32r: Cleanup direct irq_desc access

The irq descriptors are already initialized by the generic
code. Remove the redundant init code and set the irq chip with the
proper accessor function.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Hirokazu Takata <[email protected]>
Cc: Paul Mundt <[email protected]>

cris: Use generic irq Kconfig

Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as
we have converted all irq_chip functions. Fix the fallout in
show_interrupts().

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Mikael Starvik <[email protected]>

cris: Convert V32 interrupt handling

Convert the irq chip functions and install handle_simple_irq for each
interrupt to get rid of __do_IRQ()

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Mikael Starvik <[email protected]>

cris: Convert V10 interrupt handling

Convert the irq_chip functions and install handle_simple_irq for each
interrupt. This converts V10 to the flow handling and lets us remove
__do_IRQ().

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Mikael Starvik <[email protected]>

cris: Use irq handling wrapper

Use the wrapper around __do_IRQ() so we can convert V10 and V32
seperately.

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Mikael Starvik <[email protected]>

h8300: Use generic irq Kconfig

Switch to the generic irq Kconfig. h8300 has all irq chips converted
to the new functions, so select the GENERIC_HARDIRQS_NO_DEPRECATED
switch as well. Fixup the resulting fallout in show_interrupts().

Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Paul Mundt <[email protected]>