ARM: dts: uniphier: add syscon-phy-mode property to each ethernet node

Add syscon-phy-mode property specifying a phandle of system controller
to each ethernet node.

Signed-off-by: Kunihiko Hayashi <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>

SPDX: Fixup SPDX tags in a few new files

Signed-off-by: Tom Rini <[email protected]>

Merge branch 'master' of git://git.denx.de/u-boot-sh

Merge branch 'master' of git://git.denx.de/u-boot-usb

Merge branch 'master' of git://git.denx.de/u-boot-socfpga

ARM: rmobile: Unify Gen2 Makefile entry

Drop per-SoC Makefile entries and replace them with one unified entry
now that the PFC tables are gone. Shuffle the Makefile around a bit
to make it more organized.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Drop old R8A7794 PFC tables

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Drop old R8A7793 PFC tables

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Drop old R8A7792 PFC tables

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Drop old R8A7791 PFC tables

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Drop old R8A7790 PFC tables

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Update V2H Blanche

The V2H Blanche port was broken since some time. This patch updates
the V2H Blanche port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Enable DM capable RCar I2C driver on Silk

Enable the DM capable driver instead of the legacy one.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

ARM: rmobile: Enable DM capable RCar I2C driver on Lager

Enable the DM capable driver instead of the legacy one.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

i2c: rcar_i2c: Add DM and DT capable I2C driver

Add derivative of the rcar_i2c driver which is capable of
probing itself from DM and uses DT.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

i2c: rcar_i2c: Remove the driver

Remove the rcar_i2c driver, since it's no longer used by any
board and will be superseded by a DM and DT capable variant.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Heiko Schocher <[email protected]>
Cc: Nobuhiro Iwamatsu <[email protected]>

Fixup various SPDX tags from the latest merge

Signed-off-by: Tom Rini <[email protected]>

drivers: usb: dwc3: remove devm_zalloc from linux_compact

devm_zalloc() is already defined in dm/device.h header, so
devm_zalloc can be removed from linux_compact.h beader file.

Signed-off-by: Mugunthan V N <[email protected]>
Signed-off-by: Michal Simek <[email protected]>

usb: xhci: zynqmp: Remove support for !DM_USB

Switch to DM_USB was done and there is no need to keep !DM_USB code in
tree.

Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

arm64: zynqmp: Use DWC3 generic driver and DM_USB

Remove harcoded XHCI lists and detect mode, speed based on DT.

Signed-off-by: Michal Simek <[email protected]>
Serial-changes: 2
- Remove also XHCI macros from hardware.h
- Remove additional new line in zcu106

usb: xhci: zynqmp: Add support for DM_USB

The patch is adding support for DM_USB for xhci driver.

Signed-off-by: Michal Simek <[email protected]>

usb: dwc3: Add generic DWC3 glue logic driver

By enabling BLK by default this is the next driver which needs to get
support for DM_USB. Adding generic DWC3 glue logic which only
parse nodes and read device mode. Based on it probe proper
host/peripheral DWC3 drivers for it.

Signed-off-by: Michal Simek <[email protected]>

usb: common: add support to get maximum speed from dt

Add support to get maximum speed from dt so that usb drivers
makes use of it for DT parsing.

Signed-off-by: Mugunthan V N <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
(rebase and fix errors)
Reviewed-by: Simon Glass <[email protected]>

usb: dwc3: Add dwc3_init/remove with DM_USB

The patch is preparing dwc3 core for enabling DM_USB with peripheral
driver with using driver model support.
The driver will be bound by the DWC3 wrapper driver based on the
dr_mode device tree entry.

Signed-off-by: Mugunthan V N <[email protected]>
(Remove dwc3-omap changes)
Signed-off-by: Michal Simek <[email protected]>

phy: add support for STM32 usb phy controller

This patch adds phy tranceiver driver for STM32 USB PHY
Controller (usbphyc) that provides dual port High-Speed
phy for OTG (single port) and EHCI/OHCI host controller
(two ports).
One port of the phy is shared between the two USB controllers
through a UTMI+ switch.

Signed-off-by: Christophe Kerello <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
Signed-off-by: Patrice Chotard <[email protected]>

gadget: f_thor: update to support more than 4GB file as thor 5.0

During file download, it only uses 32bit variable for file size and
it limits maximum file size less than 4GB. Update to support more
than 4GB file with using two 32bit variables for file size as thor
protocol 5.0.

Signed-off-by: Seung-Woo Kim <[email protected]>

gadget: f_thor: fix filename overflow

The thor sender can send filename without null character and it is
used without consideration of overflow. Actually, character array
for filename is assigned with DEFINE_CACHE_ALIGN_BUFFER() and it
is bigger than size of memcpy, so there was no real overflow.
Fix filename overflow for code level integrity.

Signed-off-by: Seung-Woo Kim <[email protected]>

Merge git://git.denx.de/u-boot-imx

arm: dts: socfpga: stratix10: update dtsi and dts

Update dtsi and dts files for resets, phy node and other properties.

Signed-off-by: Ley Foon Tan <[email protected]>

arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch

Preparation for Stratix 10 enablement. In ARM64, L2 cache controller is
accessed through processor registers. So, add CONFIG_SYS_L2_PL310 switch
conditional build in order this file can by shared across other SOCFPGAs.

Signed-off-by: Chin Liang See <[email protected]>
Signed-off-by: Ley Foon Tan <[email protected]>

arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC

Add pinmux driver support for Stratix SoC

Signed-off-by: Chin Liang See <[email protected]>
Signed-off-by: Ley Foon Tan <[email protected]>

arm: socfpga: stratix10: Add reset manager driver for Stratix10 SoC

Add Reset Manager driver support for Stratix SoC

Signed-off-by: Chin Liang See <[email protected]>
Signed-off-by: Ley Foon Tan <[email protected]>

arm: socfpga: stratix10: Add clock manager driver for Stratix10 SoC

Add Clock Manager driver support for Stratix SoC

Signed-off-by: Chin Liang See <[email protected]>
Signed-off-by: Ley Foon Tan <[email protected]>

arm: socfpga: stratix10: Add watchdog and firewall base addresses

Add the base address for watchdog and firewall.

Signed-off-by: Chin Liang See <[email protected]>
Signed-off-by: Ley Foon Tan <[email protected]>

ARM: socfpga: Fix Documentation errors in scu_registers

According to ARM Cortex-A9 MPCore TRM section 2.2 - SCU registers
Access Control register offset is 0x50.

Signed-off-by: Ben Kalo <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Albert Aribaud <[email protected]>

ARM: socfpga: Adding SoCFPGA info for both SPL and U-Boot

SoC FPGA info is required in both SPL and U-Boot.

Signed-off-by: Tien Fong Chee <[email protected]>

ARM: socfpga: Adding clock frequency info for U-Boot

Clock frequency info is required in U-Boot because info would be erased
when transition from SPL to U-Boot.

Signed-off-by: Tien Fong Chee <[email protected]>

ARM: socfpga: Enable SPL memory allocation

Enable memory allocation in SPL for preparation to enable FAT
in SPL. Memory allocation is needed by FAT to work properly.

Signed-off-by: Tien Fong Chee <[email protected]>
Reviewed-by: Dinh Nguyen <[email protected]>

configs: Add DDR Kconfig support for Arria 10

This patch enables DDR Kconfig support for Arria 10.

Signed-off-by: Tien Fong Chee <[email protected]>
Reviewed-by: Dinh Nguyen <[email protected]>

ARM: socfpga: Add DDR driver for Arria 10

Add DDR driver support for Arria 10.

Signed-off-by: Tien Fong Chee <[email protected]>

ARM: socfpga: Add DRAM bank size initialization function

Add function for both multiple DRAM bank and single DRAM bank size
initialization. This common functionality could be used by every single
SOCFPGA board.

Signed-off-by: Tien Fong Chee <[email protected]>
Tested-by: Ley Foon Tan <[email protected]>

ARM: socfpga: Rename the gen5 sdram driver to more specific name

Current sdram driver is only applied to gen5 device, hence it is better
to rename sdram driver to more specific name which is related to gen5
device.

Signed-off-by: Tien Fong Chee <[email protected]>

ARM: socfpga: Repair A10 EMAC reset handling

The EMAC reset and PHY mode configuration was never working on the
Arria10 SoC, fix this. This patch pulls out the common code into
misc.c and passes the SoC-specific function call in as a function
pointer.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Synchronize Arria10 SoCDK SDMMC handoff

Regenerate Altera Arria 10 SoCDK SDMMC handoff file using latest
Quartus to get the new set of clock bindings in.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Synchronize Arria10 DTs

Synchronize Altera Arria 10 DT sources with Linux 4.16.3 as of commit
ef8216d28a5920022cddcb694d2d75bd1f0035ca

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Sort the DT Makefile

Sort the Makefile entries, no functional change.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Sync A10 clock manager binding parser

The A10 clock manager parsed DT bindings generated by Quartus the
bsp-editor to configure the A10 clocks. Sadly, those DT bindings
changed at some point. The clock manager patch used the old ones,
this patch replaces the bindings parser with one for the new set.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Convert to DM serial

Pull the serial port configuration from DT and use DM serial instead
of having the serial configuration in two places, DT and board config.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Clean up Kconfig entries

Shuffle the default Kconfig entries around so it is not such a mess.
No functional change.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Zap CONFIG_SOCFPGA_VIRTUAL_TARGET

This was never used, is not used anywhere and is just in the way
by adding annoying ifdeffery. Get rid of it.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

ARM: socfpga: Put stack at the end of SRAM

The global data are in the .data section, so there's no point in
reserving any space for it above stack. Put stack at the end of
SRAM.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

fdt: Add another Altera Arria10 clock init compatible

The DT bindings for the Arria10 clock init have changed, add another
compatible to make them work with U-Boot until a proper clock driver
gets written.

Signed-off-by: Marek Vasut <[email protected]>
Cc: Tom Rini <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>

arm: imx53: Add support for imx53 boards from K+P

This commit adds support for DDC and HSC boards from
K+P in u-boot.

Console output:

U-Boot 2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200)

CPU:   Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: WDOG
Model: K+P iMX53
DRAM:  512 MiB
MMC:   FSL_SDHC: 0
Loading Environment from MMC... OK
In:    serial
Out:   serial
Err:   serial
Module EEPROM:
  ID: TQMa53-CB.0401
  SN: 63152762
  MAC: 00:0b:64:03:14:2a
BBoard:40x0 Rev:10
Net:   eth0: ethernet@63fec000
Hit any key to stop autoboot:  0

Signed-off-by: Lukasz Majewski <[email protected]>

sandbox: tests: Add tests for mc34708 PMIC device

Following tests has been added for mc34708 device:

- get_test for mc34708 PMIC
- Check if proper number of registers is read
- Check if default (emulated via i2c device) value is properly read
- Check if value write/read operation is correct
- Perform tests to check if pmic_clrsetbits() is working correctly

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c

The common code can be excluded to be reused by tests for other PMIC.

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

sandbox: Enable MC34708 PMIC support

This MC34708 PMIC is somewhat special - it used single transfers (R/W) with
3 bytes size - up till now U-Boot's PMICs only used 1 byte.

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

sandbox: Enable support for MC34708 PMIC in DTS

This commit also provides the default values of the emulated MC34708 PMIC
internal registers content.

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission

This change enables support for MC34708 PMIC in sandbox. Now we can
emulate the I2C transfers larger than 1 byte.

Notable changes for this driver:

- From now on the register number is not equal to index in the buffer,
  which emulates the PMIC registers

- The PMIC register's pool is now dynamically allocated up till
  64 regs * 3 bytes each = 192 B

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

pmic: Rewrite the pmic command to not only work with single byte transmission

Up till now it was only possible to use 'pmic' command with a single byte
transmission.
The pmic_read|write functions has been replaced with ones, which don't need
the transmission length as a parameter.

Due to that it is possible now to read data from PMICs transmitting more
data than 1 byte at once (e.g. mc34708)

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

pmic: dm: Add support for MC34708 for PMIC DM

This patch adds support for MC34708 PMIC, to be used with driver model
(DM).

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions

This commit provides support for transmissions larger than 1 byte for
PMIC devices used with DM (e.g. MC34708 from NXP).

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

pmic: Add support for setting transmission length in uclass private data

The struct uc_pmic_priv's trans_len field stores the number of types to
be transmitted per PMIC transfer.

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

pmic: fsl: Define number of bytes sent at once by MC34708 PMIC

This patch adds definition of the number of bytes sent at once by the
MC34708 PMIC.

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

pmic: fsl: Provide some more definitions for MC34708 PMIC

This commit adds some more defines for MC34708 PMIC.

Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Simon Glass <[email protected]>

configs: imx6dl-mamoj: Enable HAB

Enable Secure boot(HAB) for BTicino Mamoj board.

Signed-off-by: Jagan Teki <[email protected]>

configs: imx6dl-mamoj: Add Falcon mode support

Add Falcon mode support to boot Linux directly after SPL.

Signed-off-by: Jagan Teki <[email protected]>

configs: imx6dl-mamoj: Add DFU support

Add DFU support for BTicino Mamoj board and update
the same steps in README.

Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Simone CIANNI <[email protected]>
Signed-off-by: Raffaele RECALCATI <[email protected]>

configs: imx6dl_mamoj: Enable fastboot and ums

Enable fastboot and ums for host to interact eMMC on
Mamoj board.

Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Simone CIANNI <[email protected]>
Signed-off-by: Raffaele RECALCATI <[email protected]>

i.MX6DL: mamoj: Add PFUZE100 support

MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support
for it through DM_PMIC dt definition.

pmic log:
Reviewed-by: Stefano Babic <[email protected]>
========
=> pmic list
| Name                            | Parent name         | Parent uclass @ seq
| pfuze100@08                     | i2c@021f8000        | i2c @ 3
=> pmic dev pfuze100@08
dev: 0 @ pfuze100@08
=> pmic dump
Dump pmic: pfuze100@08 registers

0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81
0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00
0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b
0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08
0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10
0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00

Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Simone CIANNI <[email protected]>
Signed-off-by: Raffaele RECALCATI <[email protected]>

i.MX6DL: mamoj: Add I2C support

i.MX6DL Mamoj has i2c3 and i2c4 buses, add support
through DM_I2C with dt definition.

i2c log:
Reviewed-by: Stefano Babic <[email protected]>
=======
=> i2c bus
Bus 2:  i2c@021a8000
Bus 3:  i2c@021f8000
=> i2c dev 2
Setting bus to 2
=> i2c speed 400000
Setting bus speed to 400000 Hz
=> i2c probe
Valid chip addresses: 20 51 53
=> i2c md 53 0xff
00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff    ................
=> i2c md 51 0xff
00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53    [email protected]
=> i2c dev 3
Setting bus to 3
=> i2c speed 100000
Setting bus speed to 100000 Hz
=> i2c probe
Valid chip addresses: 08 40 48 4B
=> i2c md 08 0xff
00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00    ................

Signed-off-by: Jagan Teki <[email protected]>
Signed-off-by: Simone CIANNI <[email protected]>
Signed-off-by: Raffaele RECALCATI <[email protected]>

i.MX6: board: Add BTicino i.MX6DL Mamoj initial support

Add initial support for i.MX6DL BTicino Mamoj board.

Mamoh board added:
- SPL
- SPL_DM
- SPL_OF_CONTROL
- DM for U-Boot proper
- OF_CONTROL for U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDP

Signed-off-by: Simone CIANNI <[email protected]>
Signed-off-by: Raffaele RECALCATI <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>

ARM: i.MX6: dts: Build dtb based on SOC type

Build dtb's based on SOC type instead building arch type.

Signed-off-by: Jagan Teki <[email protected]>

ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl

u-boot,dm-spl property is specific to U-Boot, so move it into
*u-boot.dtsi files for relevant i.MX6UL files.

This make syncing Linux dts files straight forward.

Also update the MAINTAINERS file for dts files.

Signed-off-by: Jagan Teki <[email protected]>

ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi

Move usdhc2 node along with pinctrl to imx6ul-isiot.dts
from imx6ul-isiot-emmc.dts

Signed-off-by: Jagan Teki <[email protected]>

ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl

u-boot,dm-spl property is specific to U-Boot, so move it into
*u-boot.dtsi files for relevant i.MX6QDL files.

This make syncing Linux dts files straight forward.

Also update the MAINTAINERS file for dts files.

Signed-off-by: Jagan Teki <[email protected]>

imx6: sabrelite: update defconfig to use distro defaults

Boot tested with boot.scr script and EFI/Grub2 on mmc0 and mmc1 slots on sabrelite board.

Signed-off-by: Guillaume GARDET <[email protected]>
Cc: Troy Kisky <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Gary Bisson <[email protected]>

imx6: Convert sabrelite and nitrogen6x boards to distro boot support

Boot tested on sabrelite board.

Signed-off-by: Guillaume GARDET <[email protected]>
Cc: Troy Kisky <[email protected]>
Cc: Stefano Babic <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Gary Bisson <[email protected]>
Tested-by: Denis Pynkin <[email protected]>

Merge git://www.denx.de/git/u-boot-marvell

net: MVGBE don't automatically select PHYLIB

When Kconfig support was added for MVGBE it included automatically
selected PHYLIB support. But MVGBE does not need PHYLIB it will build
fine without it. Commit ed52ea507f12 ("net: add Kconfig for MVGBE")
should have been a no-op in terms of build size but because of the
selecting PHYLIB the openrd configs increased in size.

Remove the automatic selection of PHYLIB, boards that need it will have
already enabled it in their config header file.

Fixes: commit ed52ea507f12 ("net: add Kconfig for MVGBE")
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Tom Rini <[email protected]>
Acked-by: Joe Hershberger <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for sheevaplug

Import the dts files from Linux 4.17 and enable device tree control in
u-boot.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for pogo_e02

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for openrd

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for nas220

Import the dts file from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for iconnect

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for ib62x0

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for guruplug

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for goflexhome

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for dockstar

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: kirkwood: Add device-tree for dns325

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

ARM: add devicetree files for kirkwood SoC

These files are taken verbatim from the Linux kernel 4.17

Signed-off-by: Chris Packham <[email protected]>
Signed-off-by: Stefan Roese <[email protected]>

dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl

The SION pin must be set for proper operation of I2C when DM is enabled.

When legacy I2C is used, this bit is set implicitly in the u-boot code:
arch/arm/include/asm/arch-mx5/iomux-mx53.h:92:
MX53_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x368, 0x040, 4 |
IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL),

The Linux kernel uses similar approach with:
arch/arm/boot/dts/imx53-tqma53.dtsi:182:
MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000

After applying this patch it is possible to have the I2C working with DM
on imx53 devices:

MX53_PAD_KEY_ROW3__I2C2_SDA (0x1ee | IMX_PAD_SION)

Signed-off-by: Lukasz Majewski <[email protected]>

dts: imx53: Add gpio and i2c nodes to imx53.dtsi file

Those DTS nodes has been ported from Linux kernel (v4.16)

Signed-off-by: Lukasz Majewski <[email protected]>

ge: ppd: move CONFIG_ENV_IS_IN_MMC to defconfig

CONFIG_ENV_IS_IN_MMC must be declared in defconfig to properly
support "env save".

Signed-off-by: Sebastian Reichel <[email protected]>

mx6: remove duplicated BOUNCE_BUFFER defines

The mx6_common.h file already defines BOUNCE_BUFFER so no need to
definit it again in specific configs.

Signed-off-by: Peter Robinson <[email protected]>
Acked-by: Lukasz Majewski <[email protected]>

mx6: Select CONFIG_MP with MX6_SMP

It makes sense to select the MP multi processor option at the same time we
select the other SMP options needed for SMP capable i.MX6 SoCs.

Signed-off-by: Peter Robinson <[email protected]>

mx7: remove empty ifndef statement

Signed-off-by: Peter Robinson <[email protected]>

mx6 common: remove dangling comment

Signed-off-by: Peter Robinson <[email protected]>

mx31: Convert MX31_HCLK_FREQ and MX31_CLK32 to Kconfig.

Also remove the #ifdef's from clock.h since the Kconfig values defaults
the to old default values in clock.h.

Signed-off-by: Magnus Lilja <[email protected]>
Reviewed-by: Tom Rini <[email protected]>

mx31pdk: Convert CONFIG_MX31 flag to use Kconfig.

Move CONFIG_MX31 from mx31pdk.h to mx31pdk_defconfig and introduce
necessary Kconfig changes as well.

Signed-off-by: Magnus Lilja <[email protected]>
Reviewed-by: Tom Rini <[email protected]>

board: ge: bx50v3: remove redundant targets

This replaces TARGET_GE_B{4,6,8}50V3 with common TARGET_GE_BX50V3.
The boards are identified automatically at runtime.

Signed-off-by: Ian Ray <[email protected]>
Signed-off-by: Nandor Han <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>