From: Roy H <roy@altbytes.com>
Date: Tue, 16 Sep 2025 03:25:36 +0000 (+0700)
Subject: ath79: fix longdata-aps256 wan port to work in factory bootloader
X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=b9339a27f956d2f8e0a92778087ef3b088f68ea2;p=openwrt%2Fstaging%2Fthess.git

ath79: fix longdata-aps256 wan port to work in factory bootloader

In first commit I successfully bring WAN port into ethernet switch,
without realizing that I was using custom bootloader. But if using
original bootloader it do not works. WAN port in original bootloader
is tied to using its own GMAC.

This fix is made so this firmware will be compatible with orignal
bootloader, so the user can directly flash from stock firmware without
changing anything.

Signed-off-by: Roy H <roy@altbytes.com>
Link: https://github.com/openwrt/openwrt/pull/20039
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---

diff --git a/target/linux/ath79/dts/ar9344_longdata_aps256.dts b/target/linux/ath79/dts/ar9344_longdata_aps256.dts
index 32f781a9e3..4d92fcaa27 100644
--- a/target/linux/ath79/dts/ar9344_longdata_aps256.dts
+++ b/target/linux/ath79/dts/ar9344_longdata_aps256.dts
@@ -144,10 +144,6 @@
 
 };
 
-&builtin_switch {
-	/delete-property/ qca,phy4-mii-enable; /* need to delete this to make all 5 FE ports work */
-};
-
 &usb_phy {
 	status = "okay";
 };
@@ -172,7 +168,16 @@
 	gmac-config {
 		device = <&gmac>;
 		switch-phy-swap = <0>;
-		switch-only-mode = <1>;
+		switch-only-mode = <0>;
 	};
 };
 
+&eth0 {
+	status = "okay";
+
+	phy-handle = <&swphy4>;
+
+	nvmem-cells = <&macaddr_art_1002 1>;
+	nvmem-cell-names = "mac-address";
+};
+
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 9ebdcdca6f..502b319bd1 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -300,7 +300,7 @@ kuwfi,c910)
 	ucidef_set_led_switch "lan2" "LAN2" "white:lan2" "switch0" "0x02"
 	;;
 longdata,aps256)
-	ucidef_set_led_switch "wan" "WAN" "blue:wan" "switch0" "0x20"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
 	ucidef_set_led_switch "lan1" "LAN1" "blue:lan-1" "switch0" "0x04"
 	ucidef_set_led_switch "lan2" "LAN2" "blue:lan-2" "switch0" "0x02"
 	;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index f38eaa7866..464fec44d1 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -419,8 +419,9 @@ ath79_setup_interfaces()
 			"0@eth0" "5:wan" "6@eth1" "4:lan"
 		;;
 	longdata,aps256)
+		ucidef_set_interface_wan "eth1"
 		ucidef_add_switch "switch0" \
-			"0@eth0" "1:lan:2" "2:lan:1" "5:wan"
+			"0@eth0" "1:lan:2" "2:lan:1"
 		;;
 	meraki,mr12)
 		ucidef_set_interface_lan "eth0"