From: David Bauer Date: Thu, 30 Nov 2023 21:17:36 +0000 (+0100) Subject: mediatek: add support for GL.iNet GL-X3000 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=2d408e1fefcdd03406b3e1e27c9d51f061fd3caf;p=openwrt%2Fstaging%2Fblocktrron.git mediatek: add support for GL.iNet GL-X3000 --- diff --git a/target/linux/mediatek/dts/mt7981b-glinet-gl-x3000.dts b/target/linux/mediatek/dts/mt7981b-glinet-gl-x3000.dts new file mode 100644 index 0000000000..14e67c6c29 --- /dev/null +++ b/target/linux/mediatek/dts/mt7981b-glinet-gl-x3000.dts @@ -0,0 +1,258 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include "mt7981.dtsi" + +/ { + model = "GL.iNet GL-X3000"; + compatible = "glinet,gl-x3000", "mediatek,mt7981"; + + aliases { + label-mac-device = &gmac0; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " root=PARTLABEL=rootfs rootwait"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: led-power-white { + label = "white:power"; + gpios = <&pio 39 GPIO_ACTIVE_LOW>; + }; + + led-internet { + label = "white:internet"; + gpios = <&pio 31 GPIO_ACTIVE_LOW>; + }; + + led-wlan-2g { + label = "white:wlan-2g"; + gpios = <&pio 30 GPIO_ACTIVE_LOW>; + }; + + led-wlan-5g { + label = "white:wlan-5g"; + gpios = <&pio 38 GPIO_ACTIVE_LOW>; + }; + + led-cellular-1 { + label = "white:cellular-1"; + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + }; + + led-cellular-2 { + label = "white:cellular-2"; + gpios = <&pio 7 GPIO_ACTIVE_LOW>; + }; + + led-cellular-3 { + label = "white:cellular-3"; + gpios = <&pio 8 GPIO_ACTIVE_LOW>; + }; + + led-cellular-4 { + label = "white:cellular-4"; + gpios = <&pio 4 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-export { + compatible = "gpio-export"; + + usb-power { + gpio-export,name = "usb-power"; + gpio-export,output = <1>; + gpios = <&pio 12 GPIO_ACTIVE_HIGH>; + }; + + hub-power { + gpio-export,name = "hub-power"; + gpio-export,output = <1>; + gpios = <&pio 5 GPIO_ACTIVE_HIGH>; + }; + + cellular-power { + gpio-export,name = "cellular-power"; + gpio-export,output = <1>; + gpios = <&pio 11 GPIO_ACTIVE_HIGH>; + }; + + cellular-control { + gpio-export,name = "cellular-control"; + gpio-export,output = <1>; + gpios = <&pio 9 GPIO_ACTIVE_HIGH>; + }; + + cellular-reset { + gpio-export,name = "cellular-reset"; + gpio-export,output = <0x00>; + gpios = <&pio 10 GPIO_ACTIVE_HIGH>; + }; + + thread-reset { + gpio-export,name = "thread-reset"; + gpio-export,output = <1>; + gpios = <&pio 26 GPIO_ACTIVE_HIGH>; + }; + + thread-dfu { + gpio-export,name = "thread-dfu"; + gpio-export,output = <1>; + gpios = <&pio 27 GPIO_ACTIVE_HIGH>; + }; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + fan_5v: regulator-fan-5v { + compatible = "regulator-fixed"; + regulator-name = "fan"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&pio 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + + status = "okay"; +}; + +&fan { + pwms = <&pwm 0 40000 0>; + fan-supply = <&fan_5v>; + interrupt-parent = <&pio>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + status = "okay"; +}; + +&pio { + mmc0_pins_default: mmc0-pins-default { + mux { + function = "flash"; + groups = "emmc_45"; + }; + }; + + mmc0_pins_uhs: mmc0-pins-uhs { + mux { + function = "flash"; + groups = "emmc_45"; + }; + }; + + pwm_pins: pwm0-pins { + mux { + function = "pwm"; + groups = "pwm0_1"; + }; + }; + + pcie_pins: pcie-pins { + mux { + function = "pcie"; + groups = "pcie_pereset", "pcie_clk", "pcie_wake"; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +ð { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-mode = "gmii"; + phy-handle = <&int_gbe_phy>; + }; +}; + +&mdio_bus { + reset-gpios = <&pio 14 GPIO_ACTIVE_LOW>; + reset-delay-us = <600>; + reset-post-delay-us = <20000>; + + phy5: ethernet-phy@5 { + reg = <5>; + compatible = "ethernet-phy-ieee802.3-c45"; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&xhci { + status = "okay"; +}; + +&mmc0 { + status = "okay"; + + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + bus-width = <8>; + max-frequency = <52000000>; + vmmc-supply = <®_3p3v>; + cap-mmc-highspeed; + non-removable; +}; + +&pcie { + /* ToDo: Fix upstream DTS? */ + compatible = "mediatek,mt7981-pcie", + "mediatek,mt8192-pcie"; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pins>; + status = "okay"; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 275a322a65..bb4d6c580c 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -34,7 +34,8 @@ mediatek_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" eth1 ;; glinet,gl-mt2500|\ - glinet,gl-mt3000) + glinet,gl-mt3000|\ + glinet,gl-x3000) ucidef_set_interfaces_lan_wan eth1 eth0 ;; glinet,gl-mt6000|\ diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index edee317fdf..9df82221ca 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -334,6 +334,19 @@ define Device/glinet_gl-mt6000 endef TARGET_DEVICES += glinet_gl-mt6000 +define Device/glinet_gl-x3000 + DEVICE_VENDOR := GL.iNet + DEVICE_MODEL := GL-X3000 + DEVICE_DTS := mt7981b-glinet-gl-x3000 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := e2fsprogs f2fsck mkf2fs kmod-usb3 kmod-usb-serial-option kmod-usb-net-qmi-wwan uqmi \ + kmod-mhi-bus-pci-generic kmod-mhi-bus-ep kmod-mhi-wwan-mbim kmod-mhi-wwan-ctrl + SUPPORTED_DEVICES += glinet,x3000-emmc + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata +endef +TARGET_DEVICES += glinet_gl-x3000 + define Device/h3c_magic-nx30-pro DEVICE_VENDOR := H3C DEVICE_MODEL := Magic NX30 Pro