From: Stijn Segers Date: Sun, 7 Sep 2025 09:03:47 +0000 (+0200) Subject: realtek: rtl930x: rename XGS1250-12 to A1 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=24b68023c0e4e458f529dd137bdfbc410c0bd688;p=openwrt%2Fstaging%2Fthess.git realtek: rtl930x: rename XGS1250-12 to A1 Zyxel labels their switch revisions A1, B1, ... and not v1, v2, ... Rename the supported device to A1 to make it clear this is the only known compatible hardware revision. Also add a compatible for seamless upgrade. Signed-off-by: Stijn Segers Link: https://github.com/openwrt/openwrt/pull/20118 Signed-off-by: Robert Marko --- diff --git a/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12-a1.dts b/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12-a1.dts new file mode 100644 index 0000000000..efc3670e64 --- /dev/null +++ b/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12-a1.dts @@ -0,0 +1,419 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/dts-v1/; + +#include "rtl930x.dtsi" + +#include +#include +#include +#include + +/ { + compatible = "zyxel,xgs1250-12-a1", "realtek,rtl838x-soc"; + model = "Zyxel XGS1250-12 A1 Switch"; + + aliases { + led-boot = &led_pwr_sys; + led-failsafe = &led_pwr_sys; + led-running = &led_pwr_sys; + led-upgrade = &led_pwr_sys; + }; + + keys { + compatible = "gpio-keys"; + + mode { + label = "reset"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_disable_sys_led>; + + led_pwr_sys: led-0 { + color = ; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; + }; + }; + + sfp0: sfp-p12 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpio0 16 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + led_set: led_set { + compatible = "realtek,rtl9300-leds"; + active-low; + + led_set0 = <0x0a20 0x0b80>; // LED set 0: 1000Mbps, 10/100Mbps + led_set1 = <0x0a0b 0x0a28 0x0a82 0x0a0b>; // LED set 1: (10G, 5G, 2.5G) (2.5G, 1G) + // (5G, 10/100) (10G, 5G, 2.5G) + led_set2 = <0x0a20 0x0a01>; // LED set 2: 1000MBit, 10GBit + }; + + thermal-zones { + phy24-thermal { + /* Poll every 10 seconds */ + polling-delay-passive = <10000>; + polling-delay = <10000>; + thermal-sensors = <&phy24>; + + trips { + phy24_trip0: phy24-trip0 { + /* At 80 degrees turn on fan */ + temperature = <80000>; + hysteresis = <1000>; + type = "active"; + }; + + phy24_trip1: phy24-trip1 { + /* At 108 degrees phys exceed spec */ + temperature = <108000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&phy24_trip0>; + cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + phy25-thermal { + /* Poll every 10 seconds */ + polling-delay-passive = <10000>; + polling-delay = <10000>; + thermal-sensors = <&phy25>; + + trips { + phy25_trip0: phy25-trip0 { + /* At 80 degrees turn on fan */ + temperature = <80000>; + hysteresis = <1000>; + type = "active"; + }; + + phy25_trip1: phy25-trip1 { + /* At 108 degrees phys exceed spec */ + temperature = <108000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&phy25_trip0>; + cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + phy26-thermal { + /* Poll every 10 seconds */ + polling-delay-passive = <10000>; + polling-delay = <10000>; + thermal-sensors = <&phy26>; + + trips { + phy26_trip0: phy26-trip0 { + /* At 80 degrees turn on fan */ + temperature = <80000>; + hysteresis = <1000>; + type = "active"; + }; + + phy26_trip1: phy26-trip1 { + /* At 108 degrees phys exceed spec */ + temperature = <108000>; + hysteresis = <5000>; + type = "critical"; + }; + }; + + cooling-maps { + map { + trip = <&phy26_trip0>; + cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + /* YEN SUN TECHNOLOGY FD122510LL-N fan */ + chassis_fan: gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 7000 1>; + #cooling-cells = <2>; + }; +}; + +&i2c_mst1 { + status = "okay"; + + /* i2c of the SFP+ cage; port 12 */ + i2c0: i2c@1 { + reg = <1>; + }; +}; + +&spi0 { + status = "okay"; + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xe0000>; + read-only; + }; + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x10000>; + }; + partition@f0000 { + label = "u-boot-env2"; + reg = <0xf0000 0x10000>; + read-only; + }; + partition@100000 { + label = "jffs"; + reg = <0x100000 0x100000>; + }; + partition@200000 { + label = "jffs2"; + reg = <0x200000 0x100000>; + }; + partition@b300000 { + label = "firmware"; + reg = <0x300000 0xce0000>; + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x93001250>; + }; + partition@fe0000 { + label = "log"; + reg = <0xfe0000 0x20000>; + }; + }; + }; +}; + +&mdio_bus0 { + /* External RTL8218D PHY */ + phy0: ethernet-phy@0 { + reg = <0>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 0>; + sds = < 2 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 4>; + }; + phy5: ethernet-phy@5 { + reg = <5>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 5>; + }; + phy6: ethernet-phy@6 { + reg = <6>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 6>; + }; + phy7: ethernet-phy@7 { + reg = <7>; + compatible = "ethernet-phy-ieee802.3-c22"; + rtl9300,smi-address = <0 7>; + }; + + /* External Aquantia 113C PHYs */ + phy24: ethernet-phy@24 { + reg = <24>; + compatible = "ethernet-phy-ieee802.3-c45"; + rtl9300,smi-address = <1 8>; + sds = < 6 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + }; + + phy25: ethernet-phy@25 { + reg = <25>; + compatible = "ethernet-phy-ieee802.3-c45"; + rtl9300,smi-address = <2 8>; + sds = < 7 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + }; + + phy26: ethernet-phy@26 { + reg = <26>; + compatible = "ethernet-phy-ieee802.3-c45"; + rtl9300,smi-address = <3 8>; + sds = < 8 >; + // Disabled because we do not know how to bring up again + // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + #thermal-sensor-cells = <0>; + }; + + INTERNAL_PHY_SDS(27, 9) +}; + +&switch0 { + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan1"; + pcs-handle = <&serdes2>; + phy-handle = <&phy0>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + port@1 { + reg = <1>; + label = "lan2"; + pcs-handle = <&serdes2>; + phy-handle = <&phy1>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + port@2 { + reg = <2>; + label = "lan3"; + pcs-handle = <&serdes2>; + phy-handle = <&phy2>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + port@3 { + reg = <3>; + label = "lan4"; + pcs-handle = <&serdes2>; + phy-handle = <&phy3>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + port@4 { + reg = <4>; + label = "lan5"; + pcs-handle = <&serdes2>; + phy-handle = <&phy4>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + port@5 { + reg = <5>; + label = "lan6"; + pcs-handle = <&serdes2>; + phy-handle = <&phy5>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + port@6 { + reg = <6>; + label = "lan7"; + pcs-handle = <&serdes2>; + phy-handle = <&phy6>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + port@7 { + reg = <7>; + label = "lan8"; + pcs-handle = <&serdes2>; + phy-handle = <&phy7>; + phy-mode = "usxgmii"; + led-set = <0>; + }; + + port@24 { + reg = <24>; + label = "lan9"; + pcs-handle = <&serdes6>; + phy-handle = <&phy24>; + phy-mode = "usxgmii"; + led-set = <1>; + }; + port@25 { + reg = <25>; + label = "lan10"; + pcs-handle = <&serdes7>; + phy-handle = <&phy25>; + phy-mode = "usxgmii"; + led-set = <1>; + }; + port@26 { + reg = <26>; + label = "lan11"; + pcs-handle = <&serdes8>; + phy-handle = <&phy26>; + phy-mode = "usxgmii"; + led-set = <1>; + }; + + port@27 { + reg = <27>; + label = "lan12"; + pcs-handle = <&serdes9>; + phy-handle = <&phy27>; + phy-mode = "1000base-x"; + sfp = <&sfp0>; + led-set = <2>; + managed = "in-band-status"; + }; + + port@28 { + ethernet = <ðernet0>; + reg = <28>; + phy-mode = "internal"; + fixed-link { + speed = <10000>; + full-duplex; + }; + }; + }; +}; diff --git a/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12.dts b/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12.dts deleted file mode 100644 index 83ec485ce9..0000000000 --- a/target/linux/realtek/dts/rtl9302_zyxel_xgs1250-12.dts +++ /dev/null @@ -1,419 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/dts-v1/; - -#include "rtl930x.dtsi" - -#include -#include -#include -#include - -/ { - compatible = "zyxel,xgs1250-12", "realtek,rtl838x-soc"; - model = "Zyxel XGS1250-12 Switch"; - - aliases { - led-boot = &led_pwr_sys; - led-failsafe = &led_pwr_sys; - led-running = &led_pwr_sys; - led-upgrade = &led_pwr_sys; - }; - - keys { - compatible = "gpio-keys"; - - mode { - label = "reset"; - gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-names = "default"; - pinctrl-0 = <&pinmux_disable_sys_led>; - - led_pwr_sys: led-0 { - color = ; - function = LED_FUNCTION_POWER; - gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; - }; - }; - - sfp0: sfp-p12 { - compatible = "sff,sfp"; - i2c-bus = <&i2c0>; - los-gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; - tx-fault-gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; - mod-def0-gpio = <&gpio0 16 GPIO_ACTIVE_LOW>; - tx-disable-gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; - }; - - led_set: led_set { - compatible = "realtek,rtl9300-leds"; - active-low; - - led_set0 = <0x0a20 0x0b80>; // LED set 0: 1000Mbps, 10/100Mbps - led_set1 = <0x0a0b 0x0a28 0x0a82 0x0a0b>; // LED set 1: (10G, 5G, 2.5G) (2.5G, 1G) - // (5G, 10/100) (10G, 5G, 2.5G) - led_set2 = <0x0a20 0x0a01>; // LED set 2: 1000MBit, 10GBit - }; - - thermal-zones { - phy24-thermal { - /* Poll every 10 seconds */ - polling-delay-passive = <10000>; - polling-delay = <10000>; - thermal-sensors = <&phy24>; - - trips { - phy24_trip0: phy24-trip0 { - /* At 80 degrees turn on fan */ - temperature = <80000>; - hysteresis = <1000>; - type = "active"; - }; - - phy24_trip1: phy24-trip1 { - /* At 108 degrees phys exceed spec */ - temperature = <108000>; - hysteresis = <5000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&phy24_trip0>; - cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - phy25-thermal { - /* Poll every 10 seconds */ - polling-delay-passive = <10000>; - polling-delay = <10000>; - thermal-sensors = <&phy25>; - - trips { - phy25_trip0: phy25-trip0 { - /* At 80 degrees turn on fan */ - temperature = <80000>; - hysteresis = <1000>; - type = "active"; - }; - - phy25_trip1: phy25-trip1 { - /* At 108 degrees phys exceed spec */ - temperature = <108000>; - hysteresis = <5000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&phy25_trip0>; - cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - - phy26-thermal { - /* Poll every 10 seconds */ - polling-delay-passive = <10000>; - polling-delay = <10000>; - thermal-sensors = <&phy26>; - - trips { - phy26_trip0: phy26-trip0 { - /* At 80 degrees turn on fan */ - temperature = <80000>; - hysteresis = <1000>; - type = "active"; - }; - - phy26_trip1: phy26-trip1 { - /* At 108 degrees phys exceed spec */ - temperature = <108000>; - hysteresis = <5000>; - type = "critical"; - }; - }; - - cooling-maps { - map { - trip = <&phy26_trip0>; - cooling-device = <&chassis_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - /* YEN SUN TECHNOLOGY FD122510LL-N fan */ - chassis_fan: gpio-fan { - compatible = "gpio-fan"; - gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; - gpio-fan,speed-map = <0 0 - 7000 1>; - #cooling-cells = <2>; - }; -}; - -&i2c_mst1 { - status = "okay"; - - /* i2c of the SFP+ cage; port 12 */ - i2c0: i2c@1 { - reg = <1>; - }; -}; - -&spi0 { - status = "okay"; - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <10000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0xe0000>; - read-only; - }; - partition@e0000 { - label = "u-boot-env"; - reg = <0xe0000 0x10000>; - }; - partition@f0000 { - label = "u-boot-env2"; - reg = <0xf0000 0x10000>; - read-only; - }; - partition@100000 { - label = "jffs"; - reg = <0x100000 0x100000>; - }; - partition@200000 { - label = "jffs2"; - reg = <0x200000 0x100000>; - }; - partition@b300000 { - label = "firmware"; - reg = <0x300000 0xce0000>; - compatible = "openwrt,uimage", "denx,uimage"; - openwrt,ih-magic = <0x93001250>; - }; - partition@fe0000 { - label = "log"; - reg = <0xfe0000 0x20000>; - }; - }; - }; -}; - -&mdio_bus0 { - /* External RTL8218D PHY */ - phy0: ethernet-phy@0 { - reg = <0>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 0>; - sds = < 2 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - }; - phy1: ethernet-phy@1 { - reg = <1>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 1>; - }; - phy2: ethernet-phy@2 { - reg = <2>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 2>; - }; - phy3: ethernet-phy@3 { - reg = <3>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 3>; - }; - phy4: ethernet-phy@4 { - reg = <4>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 4>; - }; - phy5: ethernet-phy@5 { - reg = <5>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 5>; - }; - phy6: ethernet-phy@6 { - reg = <6>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 6>; - }; - phy7: ethernet-phy@7 { - reg = <7>; - compatible = "ethernet-phy-ieee802.3-c22"; - rtl9300,smi-address = <0 7>; - }; - - /* External Aquantia 113C PHYs */ - phy24: ethernet-phy@24 { - reg = <24>; - compatible = "ethernet-phy-ieee802.3-c45"; - rtl9300,smi-address = <1 8>; - sds = < 6 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - #thermal-sensor-cells = <0>; - }; - - phy25: ethernet-phy@25 { - reg = <25>; - compatible = "ethernet-phy-ieee802.3-c45"; - rtl9300,smi-address = <2 8>; - sds = < 7 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - #thermal-sensor-cells = <0>; - }; - - phy26: ethernet-phy@26 { - reg = <26>; - compatible = "ethernet-phy-ieee802.3-c45"; - rtl9300,smi-address = <3 8>; - sds = < 8 >; - // Disabled because we do not know how to bring up again - // reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; - #thermal-sensor-cells = <0>; - }; - - INTERNAL_PHY_SDS(27, 9) -}; - -&switch0 { - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "lan1"; - pcs-handle = <&serdes2>; - phy-handle = <&phy0>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - port@1 { - reg = <1>; - label = "lan2"; - pcs-handle = <&serdes2>; - phy-handle = <&phy1>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - port@2 { - reg = <2>; - label = "lan3"; - pcs-handle = <&serdes2>; - phy-handle = <&phy2>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - port@3 { - reg = <3>; - label = "lan4"; - pcs-handle = <&serdes2>; - phy-handle = <&phy3>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - port@4 { - reg = <4>; - label = "lan5"; - pcs-handle = <&serdes2>; - phy-handle = <&phy4>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - port@5 { - reg = <5>; - label = "lan6"; - pcs-handle = <&serdes2>; - phy-handle = <&phy5>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - port@6 { - reg = <6>; - label = "lan7"; - pcs-handle = <&serdes2>; - phy-handle = <&phy6>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - port@7 { - reg = <7>; - label = "lan8"; - pcs-handle = <&serdes2>; - phy-handle = <&phy7>; - phy-mode = "usxgmii"; - led-set = <0>; - }; - - port@24 { - reg = <24>; - label = "lan9"; - pcs-handle = <&serdes6>; - phy-handle = <&phy24>; - phy-mode = "usxgmii"; - led-set = <1>; - }; - port@25 { - reg = <25>; - label = "lan10"; - pcs-handle = <&serdes7>; - phy-handle = <&phy25>; - phy-mode = "usxgmii"; - led-set = <1>; - }; - port@26 { - reg = <26>; - label = "lan11"; - pcs-handle = <&serdes8>; - phy-handle = <&phy26>; - phy-mode = "usxgmii"; - led-set = <1>; - }; - - port@27 { - reg = <27>; - label = "lan12"; - pcs-handle = <&serdes9>; - phy-handle = <&phy27>; - phy-mode = "1000base-x"; - sfp = <&sfp0>; - led-set = <2>; - managed = "in-band-status"; - }; - - port@28 { - ethernet = <ðernet0>; - reg = <28>; - phy-mode = "internal"; - fixed-link { - speed = <10000>; - full-duplex; - }; - }; - }; -}; diff --git a/target/linux/realtek/image/rtl930x.mk b/target/linux/realtek/image/rtl930x.mk index e8248db842..e20c863a16 100644 --- a/target/linux/realtek/image/rtl930x.mk +++ b/target/linux/realtek/image/rtl930x.mk @@ -114,13 +114,15 @@ define Device/zyxel_xgs1210-12-a1 endef TARGET_DEVICES += zyxel_xgs1210-12-a1 -define Device/zyxel_xgs1250-12 +define Device/zyxel_xgs1250-12-a1 SOC := rtl9302 UIMAGE_MAGIC := 0x93001250 ZYXEL_VERS := ABWE DEVICE_VENDOR := Zyxel DEVICE_MODEL := XGS1250-12 + DEVICE_VARIANT := A1 DEVICE_PACKAGES := kmod-hwmon-gpiofan kmod-thermal + SUPPORTED_DEVICES += zyxel,xgs1250-12 IMAGE_SIZE := 13312k KERNEL_INITRAMFS := \ kernel-bin | \ @@ -129,4 +131,4 @@ define Device/zyxel_xgs1250-12 zyxel-vers | \ uImage gzip endef -TARGET_DEVICES += zyxel_xgs1250-12 +TARGET_DEVICES += zyxel_xgs1250-12-a1