From: Yen-Ting-Shen Date: Fri, 1 Nov 2019 07:47:28 +0000 (+0800) Subject: ipq40xx: add support for EnGenius EMR3500 X-Git-Url: http://git.openwrt.org/?a=commitdiff_plain;h=2386060aae132e9c790e50d84533dd8e72b09fdf;p=project%2Ffirmware%2Fqca-wireless.git ipq40xx: add support for EnGenius EMR3500 SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB NOR: 32 MiB ETH: Qualcomm Atheros QCA8072 (2 ports) USB: 1 x 2.0 (Host controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button LEDS: White, Blue, Red, Orange Flash instruction: From EnGenius firmware to OpenWrt firmware: In Firmware Upgrade page, upgrade your openwrt-ipq40xx-generic-engenius_emr3500-squashfs-factory.bin directly. From OpenWrt firmware to EnGenius firmware: 1. Setup a TFTP server on your computer and configure static IP to 192.168.99.8 Put the EnGenius firmware in the TFTP server directory on your computer. 2. Power up EMR3500. Press 4 and then press any key to enter u-boot. 3. Download EnGenius firmware (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-emr3500-nor-fw-s.img 4. Flash the firmware (IPQ40xx) # imgaddr=0x84000000 && source 0x84000000:script 5. Reboot (IPQ40xx) # reset Signed-off-by: Yen-Ting-Shen [squashed update patch, updated to 5.4, dropped BOARD_NAME, migrated to SOC] Signed-off-by: Christian Lamparter --- diff --git a/board-engenius_emr3500.qca4019 b/board-engenius_emr3500.qca4019 new file mode 100644 index 0000000..9f7ecfb Binary files /dev/null and b/board-engenius_emr3500.qca4019 differ