Sercomm H500-s is an xDSL dual band wireless router based on Broadcom
BCM63167 SoC.
Hardware:
SoC: Broadcom BCM63167
CPU: BMIPS4350 V8.0, 400 MHz, 2 cores
Flash: NAND 128 MiB
RAM: DDR3 128 MiB
Ethernet: 4x 10/100/1000 Mbps
Switch: BCM53134S
Wireless: 802.11b/g/n: BCM435f (integrated)
802.11ac: Quantenna QT3740BC (onboard SoC)
USB: 1x 2.0
LEDs/Buttons: 11x / 2x
Flash instruction, web UI:
1. Reset to defaults using the reset button if the admin password is
unknown
2. Login into the web UI as admin.
Address: http://192.168.0.1
User: admin
Password: VF-ESVodafone-H-500-s or l033i-h500s
3. Go to Settings -> Firmware Update, and select the Openwrt factory
firmware
4. Update the firmware.
5. Wait until it finish, the device will reboot with Openwrt installed
on the alternative image partitions keeping the stock firmware in
the former.
Notes:
- The patch also adds support for the lowi version. Only the factory
firmware is different.
- The integrated Wifi in the Broadcom Soc isn't still supported.
- The Quantenna 802.11ac wifi works ok, but needs to be configured with
the Quantenna client application. It can't be configured with Luci
nor any iw command since it's a separated subsystem linked via
ethernet.
- The BCM53134S external switch is managed via MDIO which isn't
supported in this target. Therefore it will behave as a dumb switch.
Signed-off-by: Daniel González Cabanelas <[email protected]>
sercomm,ad1018-nor)
ucidef_set_led_netdev "wlan0" "WLAN" "AD1018:green:wifi" "wlan0"
;;
+sercomm,h500-s-lowi|\
+sercomm,h500-s-vfes)
+ ucidef_set_led_netdev "wan" "WAN" "h500-s:green:internet" "eth0.2"
+ ;;
telsey,cpva502plus)
ucidef_set_led_netdev "lan" "LAN" "CPVA502+:amber:link" "eth0"
;;
ucidef_add_switch "switch0" \
"1:lan:3" "2:lan:2" "3:lan:1" "0:wan" "8t@eth0"
;;
+sercomm,h500-s-lowi|\
+sercomm,h500-s-vfes)
+ ucidef_add_switch "switch0" "4:lan" "3:wan" "8t@eth0"
+ ;;
sfr,neufbox-6-sercomm-r0)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0"
comtrend,vr-3032u|\
huawei,hg253s-v2|\
netgear,dgnd3700-v2|\
- sercomm,ad1018)
+ sercomm,ad1018|\
+ sercomm,h500-s-lowi|\
+ sercomm,h500-s-vfes)
# NAND sysupgrade
return 0
;;
comtrend,vr-3032u|\
huawei,hg253s-v2|\
netgear,dgnd3700-v2|\
- sercomm,ad1018)
+ sercomm,ad1018|\
+ sercomm,h500-s-lowi|\
+ sercomm,h500-s-vfes)
REQUIRE_IMAGE_METADATA=1
cfe_jffs2_upgrade_tar "$1"
;;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Sercomm H500-s lowi
+ *
+ */
+
+/dts-v1/;
+
+#include "bcm63167-sercomm-h500-s.dtsi"
+
+/ {
+ model = "Sercomm H500-s lowi";
+ compatible = "sercomm,h500-s-lowi", "brcm,bcm63167", "brcm,bcm63268";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Sercomm H500-s vfes
+ *
+ */
+
+/dts-v1/;
+
+#include "bcm63167-sercomm-h500-s.dtsi"
+
+/ {
+ model = "Sercomm H500-s vfes";
+ compatible = "sercomm,h500-s-vfes", "brcm,bcm63167", "brcm,bcm63268";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Sercomm H500-s
+ *
+ */
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ chosen {
+ bootargs = "rootfstype=squashfs,ubifs noinitrd console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&pinctrl 34 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ debounce-interval = <60>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&pinctrl 35 1>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&leds {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ mobile_red {
+ reg = <0>;
+ label = "h500-s:red:mobile";
+ };
+
+ mobile_green {
+ reg = <1>;
+ label = "h500-s:green:mobile";
+ };
+
+ led_power_red: power_red {
+ reg = <8>;
+ label = "h500-s:red:power";
+ };
+
+ wifi_green {
+ reg = <9>;
+ label = "h500-s:green:wifi";
+ };
+
+ phone_red {
+ reg = <12>;
+ label = "h500-s:red:phone";
+ };
+
+ wifi_red {
+ reg = <13>;
+ label = "h500-s:red:wifi";
+ };
+
+ internet_red {
+ reg = <14>;
+ label = "h500-s:red:internet";
+ };
+
+ internet_green {
+ reg = <15>;
+ label = "h500-s:green:internet";
+ };
+
+ phone_green {
+ reg = <16>;
+ label = "h500-s:green:phone";
+ };
+
+ led_power_green: power_green {
+ reg = <17>;
+ label = "h500-s:green:power";
+ default-state = "on";
+ };
+
+ mobile_blue {
+ reg = <23>;
+ label = "h500-s:blue:mobile";
+ };
+};
+
+&nflash {
+ status = "okay";
+
+ nandcs@0 {
+ compatible = "brcm,nandcs";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ reg = <0>;
+ nand-ecc-step-size = <512>;
+ nand-ecc-strength = <4>;
+ nand-on-flash-bbt;
+ brcm,nand-oob-sector-size = <64>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "cferom";
+ reg = <0x0000000 0x0020000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "part_map";
+ reg = <0x0020000 0x00a0000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ label = "cferam1";
+ reg = <0x00c0000 0x0140000>;
+ read-only;
+ };
+
+ partition@200000 {
+ label = "cferam2";
+ reg = <0x0200000 0x0140000>;
+ read-only;
+ };
+
+ partition@6920000 {
+ label = "bootflag1";
+ reg = <0x6920000 0x0140000>;
+ };
+
+ partition@6a60000 {
+ label = "bootflag2";
+ reg = <0x6a60000 0x0140000>;
+ };
+
+ partition@520000 {
+ compatible = "sercomm,wfi";
+ label = "wfi";
+ reg = <0x0520000 0x6400000>; /* 2 images, 97152 KiB */
+ };
+
+ partition@6ba0000 {
+ label = "xml_cfg";
+ reg = <0x6ba0000 0x0280000>;
+ read-only;
+ };
+
+ partition@6e20000 {
+ label = "app_data";
+ reg = <0x6e20000 0x0280000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pinctrl {
+ pinctrl_leds: leds {
+ function = "led";
+ pins = "gpio0", "gpio1", "gpio8", "gpio9",
+ "gpio12", "gpio13", "gpio14", "gpio15",
+ "gpio16", "gpio17", "gpio23";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
define Device/sercomm-nand
$(Device/bcm63xx-nand)
- IMAGES = factory.img sysupgrade.bin
+ IMAGES := factory.img sysupgrade.bin
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
SERCOM_PID :=
SERCOMM_VERSION :=
SERCOMM_VERSION := 1001
endef
TARGET_DEVICES += sercomm_ad1018
+
+define Device/sercomm_h500-s-lowi
+ $(Device/sercomm-nand)
+ DEVICE_VENDOR := Sercomm
+ DEVICE_MODEL := H500-s
+ DEVICE_VARIANT := lowi
+ DEVICE_LOADADDR := $(KERNEL_LOADADDR)
+ KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
+ CHIP_ID := 63268
+ SOC := bcm63167
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(USB2_PACKAGES)
+ SERCOMM_PID := \
+ 30 30 30 30 30 30 30 31 34 33 34 62 33 31 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 33 33 30 35 30 30 30 30 30 30 30 30 \
+ 0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ SERCOMM_VERSION := 1001
+endef
+TARGET_DEVICES += sercomm_h500-s-lowi
+
+define Device/sercomm_h500-s-vfes
+ $(Device/sercomm-nand)
+ DEVICE_VENDOR := Sercomm
+ DEVICE_MODEL := H500-s
+ DEVICE_VARIANT := vfes
+ DEVICE_LOADADDR := $(KERNEL_LOADADDR)
+ KERNEL := kernel-bin | append-dtb | lzma | cfe-jffs2-kernel
+ CHIP_ID := 63268
+ SOC := bcm63167
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ SUBPAGESIZE := 512
+ VID_HDR_OFFSET := 2048
+ DEVICE_PACKAGES += $(USB2_PACKAGES)
+ SERCOMM_PID := \
+ 30 30 30 30 30 30 30 31 34 32 35 38 34 62 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 \
+ 30 30 30 30 33 34 31 37 30 30 30 30 30 30 30 30 \
+ 0D 0A 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ SERCOMM_VERSION := 1001
+endef
+TARGET_DEVICES += sercomm_h500-s-vfes
--- /dev/null
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2869,6 +2869,37 @@ static struct board_info __initdata boar
+ },
+ },
+ };
++
++static struct board_info __initdata board_H500s = {
++ .name = "BXK00C-1.6",
++ .expected_cpu_id = 0x63268,
++
++ .has_ehci0 = 1,
++ .has_ohci0 = 1,
++ .num_usbh_ports = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [3] = {
++ .used = 1,
++ .phy_id = 12,
++ .name = "WAN",
++ },
++
++ [4] = {
++ .used = 1,
++ .phy_id = 0,
++ .bypass_link = 1,
++ .force_speed = 1000,
++ .force_duplex_full = 1,
++ .mii_override = 1,
++ .timing_sel = 1,
++ .name = "RGMII",
++ },
++ },
++ },
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+
+ /*
+@@ -2983,6 +3014,7 @@ static const struct board_info __initcon
+ &board_VR3032u,
+ &board_vw6339gu,
+ &board_BSKYB_63168,
++ &board_H500s,
+ #endif
+ };
+
+@@ -3101,6 +3133,8 @@ static struct of_device_id const bcm963x
+ { .compatible = "comtrend,vg-8050", .data = &board_VG8050, },
+ { .compatible = "comtrend,vr-3032u", .data = &board_VR3032u, },
+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
++ { .compatible = "sercomm,h500-s-lowi", .data = &board_H500s, },
++ { .compatible = "sercomm,h500-s-vfes", .data = &board_H500s, },
+ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif
+ #endif /* CONFIG_OF */
projects / openwrt / staging / blocktrron.git / commitdiff