Some controller pretend they support the Delete Stored Link Key command,
but in reality they really don't support it.
< HCI Command: Delete Stored Link Key (0x03|0x0012) plen 7
bdaddr 00:00:00:00:00:00 all 1
> HCI Event: Command Complete (0x0e) plen 4
Delete Stored Link Key (0x03|0x0012) ncmd 1
status 0x11 deleted 0
Error: Unsupported Feature or Parameter Value
Not correctly supporting this command causes the controller setup to
fail and will make a device not work. However sending the command for
controller that handle stored link keys is important. This quirk
allows a driver to disable the command if it knows that this command
handling is broken.
Signed-off-by: Marcel Holtmann <[email protected]>
Signed-off-by: Johan Hedberg <[email protected]>
enum {
HCI_QUIRK_RESET_ON_CLOSE,
HCI_QUIRK_RAW_DEVICE,
- HCI_QUIRK_FIXUP_BUFFER_SIZE
+ HCI_QUIRK_FIXUP_BUFFER_SIZE,
+ HCI_QUIRK_BROKEN_STORED_LINK_KEY,
};
/* HCI device flags */
* as supported send it. If not supported assume that the controller
* does not have actual support for stored link keys which makes this
* command redundant anyway.
+ *
+ * Some controllers indicate that they support handling deleting
+ * stored link keys, but they don't. The quirk lets a driver
+ * just disable this command.
*/
- if (hdev->commands[6] & 0x80) {
+ if (hdev->commands[6] & 0x80 &&
+ !test_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks)) {
struct hci_cp_delete_stored_link_key cp;
bacpy(&cp.bdaddr, BDADDR_ANY);