There are only a few drivers that use HW scan, and
all of those don't need a non-idle transition before
starting the scan -- some don't even care about idle
at all. Remove the flag and code associated with it.
The only driver that really actually needed this is
wl1251 and it can just do it itself in the hw_scan
callback -- implement that.
Acked-by: Luciano Coelho <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
IEEE80211_HW_QUEUE_CONTROL |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
- IEEE80211_HW_WANT_MONITOR_VIF |
- IEEE80211_HW_SCAN_WHILE_IDLE;
+ IEEE80211_HW_WANT_MONITOR_VIF;
hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE;
hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT;
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_QUEUE_CONTROL |
IEEE80211_HW_WANT_MONITOR_VIF |
- IEEE80211_HW_SCAN_WHILE_IDLE |
IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_SUPPORTS_DYNAMIC_PS |
static int wl1251_event_scan_complete(struct wl1251 *wl,
struct event_mailbox *mbox)
{
+ int ret = 0;
+
wl1251_debug(DEBUG_EVENT, "status: 0x%x, channels: %d",
mbox->scheduled_scan_status,
mbox->scheduled_scan_channels);
ieee80211_scan_completed(wl->hw, false);
wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan completed");
wl->scanning = false;
+ if (wl->hw->conf.flags & IEEE80211_CONF_IDLE)
+ ret = wl1251_ps_set_mode(wl, STATION_IDLE);
}
- return 0;
+ return ret;
}
static void wl1251_event_mbox_dump(struct event_mailbox *mbox)
}
}
- if (changed & IEEE80211_CONF_CHANGE_IDLE) {
+ if (changed & IEEE80211_CONF_CHANGE_IDLE && !wl->scanning) {
if (conf->flags & IEEE80211_CONF_IDLE) {
ret = wl1251_ps_set_mode(wl, STATION_IDLE);
if (ret < 0)
if (ret < 0)
goto out;
+ if (hw->conf.flags & IEEE80211_CONF_IDLE) {
+ ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
+ if (ret < 0)
+ goto out_sleep;
+ ret = wl1251_join(wl, wl->bss_type, wl->channel,
+ wl->beacon_int, wl->dtim_period);
+ if (ret < 0)
+ goto out_sleep;
+ }
+
skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len,
req->ie_len);
if (!skb) {
ret = -ENOMEM;
- goto out;
+ goto out_idle;
}
if (req->ie_len)
memcpy(skb_put(skb, req->ie_len), req->ie, req->ie_len);
skb->len);
dev_kfree_skb(skb);
if (ret < 0)
- goto out_sleep;
+ goto out_idle;
ret = wl1251_cmd_trigger_scan_to(wl, 0);
if (ret < 0)
- goto out_sleep;
+ goto out_idle;
wl->scanning = true;
req->n_channels, WL1251_SCAN_NUM_PROBES);
if (ret < 0) {
wl->scanning = false;
- goto out_sleep;
+ goto out_idle;
}
+ goto out_sleep;
+out_idle:
+ if (hw->conf.flags & IEEE80211_CONF_IDLE)
+ ret = wl1251_ps_set_mode(wl, STATION_IDLE);
out_sleep:
wl1251_ps_elp_sleep(wl);
IEEE80211_HW_AP_LINK_PS |
IEEE80211_HW_AMPDU_AGGREGATION |
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW |
- IEEE80211_HW_SCAN_WHILE_IDLE |
IEEE80211_HW_QUEUE_CONTROL;
wl->hw->wiphy->cipher_suites = cipher_suites;
* setup strictly in HW. mac80211 should not attempt to do this in
* software.
*
- * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while
- * being idle (i.e. mac80211 doesn't have to go idle-off during the
- * the scan).
- *
* @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of
* a virtual monitor interface when monitor interfaces are the only
* active interfaces.
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
IEEE80211_HW_AP_LINK_PS = 1<<22,
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
- IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24,
IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25,
IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26,
};
sf += snprintf(buf + sf, mxln - sf, "AP_LINK_PS\n");
if (local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW)
sf += snprintf(buf + sf, mxln - sf, "TX_AMPDU_SETUP_IN_HW\n");
- if (local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)
- sf += snprintf(buf + sf, mxln - sf, "SCAN_WHILE_IDLE\n");
rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
kfree(buf);
}
}
- sdata = rcu_dereference_protected(local->scan_sdata,
- lockdep_is_held(&local->mtx));
- if (sdata && !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) {
- scanning = true;
- sdata->vif.bss_conf.idle = false;
- }
+ scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
+ test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning);
list_for_each_entry(sdata, &local->interfaces, list) {
if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
return -EINVAL;
#endif
- if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan)
- return -EINVAL;
-
if (!local->use_chanctx) {
for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
const struct ieee80211_iface_combination *comb;