powerpc/mpc832x_rdb: fix swapped ethernet ids

ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and
ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so
that the interfaces do not swap addresses when control passes from
U-Boot to the kernel.

Signed-off-by: Michael Barkowski <[email protected]>
Acked-by: Kim Phillips <[email protected]>
Signed-off-by: Kumar Gala <[email protected]>

diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 226ff066652ba36e8f5e5c229b643a68c03da49d..dea30910c136800cbe1bdb37fbe3e354376cf9d3 100644 (file)
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -18,8 +18,8 @@
        #size-cells = <1>;
 
        aliases {
-               ethernet0 = &enet0;
-               ethernet1 = &enet1;
+               ethernet0 = &enet1;
+               ethernet1 = &enet0;
                serial0 = &serial0;
                serial1 = &serial1;
                pci0 = &pci0;