net: ethernet: renesas: sh_eth: add POST registers for rz

Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers
were not documented and left out of the driver for RZ/A making the CAM
feature non-operational.
Additionally, when the offset values for POST1-4 are left blank, the driver
attempts to set them using an offset of 0xFFFF which can cause a memory
corruption or panic.

This patch fixes the panic and properly enables CAM.

Reported-by: Daniel Palmer <[email protected]>
Signed-off-by: Chris Brandt <[email protected]>
Acked-by: Sergei Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 799d58d86e6dcb86fc23c125abbbbc317720e2b7..054e795df90f9de2bea2accd6c9d66eafc01ffb0 100644 (file)
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -201,9 +201,14 @@ static const u16 sh_eth_offset_fast_rz[SH_ETH_MAX_REGISTER_OFFSET] = {
 
        [ARSTR]         = 0x0000,
        [TSU_CTRST]     = 0x0004,
+       [TSU_FWSLC]     = 0x0038,
        [TSU_VTAG0]     = 0x0058,
        [TSU_ADSBSY]    = 0x0060,
        [TSU_TEN]       = 0x0064,
+       [TSU_POST1]     = 0x0070,
+       [TSU_POST2]     = 0x0074,
+       [TSU_POST3]     = 0x0078,
+       [TSU_POST4]     = 0x007c,
        [TSU_ADRH0]     = 0x0100,
 
        [TXNLCR0]       = 0x0080,
@@ -2786,6 +2791,8 @@ static void sh_eth_tsu_init(struct sh_eth_private *mdp)
 {
        if (sh_eth_is_rz_fast_ether(mdp)) {
                sh_eth_tsu_write(mdp, 0, TSU_TEN); /* Disable all CAM entry */
+               sh_eth_tsu_write(mdp, TSU_FWSLC_POSTENU | TSU_FWSLC_POSTENL,
+                                TSU_FWSLC);    /* Enable POST registers */
                return;
        }