realtek: make "u-boot-env" partition writable for Netgear 3xx series

The Netgear GS3xx devices do not properly initialise the port LEDs during
startup unless the boot command in U-Boot is changed. Making the U-Boot
env partition writable allows this modification to be done from within
OpenWrt by calling "fw_setenv bootcmd rtk network on\; boota".

Signed-off-by: Andreas Böhler <[email protected]>

diff --git a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi
index efb146a25ad15f66fff8f1a1107dcebd53b4d04f..0ade665c988a7861475ffd53e72e1ee8417b185e 100644 (file)
--- a/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl8380_netgear_gigabit_3xx.dtsi
@@ -24,7 +24,6 @@
                        partition@e0000 {
                                label = "u-boot-env";
                                reg = <0x00e0000 0x0010000>;
-                               read-only;
                        };
 
                        partition@f0000 {