The MIPS syscall handler code used to return -ENOSYS on invalid
syscalls. Whilst this is expected, it caused problems for seccomp
filters because the said filters never had the change to run since
the code returned -ENOSYS before triggering them. This caused
problems on the chromium testsuite for filters looking for invalid
syscalls. This has now changed and the seccomp filters are always
run even if the syscall is invalid. We return -ENOSYS once we
return from the seccomp filters. Moreover, similar codepaths have
been merged in the process which simplifies somewhat the overall
syscall code.
Signed-off-by: Markos Chandras <[email protected]>
Cc: [email protected]
Patchwork: https://patchwork.linux-mips.org/patch/11236/
Signed-off-by: Ralf Baechle <[email protected]>
lw t1, PT_EPC(sp) # skip syscall on return
subu v0, v0, __NR_O32_Linux # check syscall number
- sltiu t0, v0, __NR_O32_Linux_syscalls + 1
addiu t1, 4 # skip to next instruction
sw t1, PT_EPC(sp)
- beqz t0, illegal_syscall
-
- sll t0, v0, 2
- la t1, sys_call_table
- addu t1, t0
- lw t2, (t1) # syscall routine
- beqz t2, illegal_syscall
sw a3, PT_R26(sp) # save a3 for syscall restarting
li t1, _TIF_WORK_SYSCALL_ENTRY
and t0, t1
bnez t0, syscall_trace_entry # -> yes
+syscall_common:
+ sltiu t0, v0, __NR_O32_Linux_syscalls + 1
+ beqz t0, illegal_syscall
+
+ sll t0, v0, 2
+ la t1, sys_call_table
+ addu t1, t0
+ lw t2, (t1) # syscall routine
+
+ beqz t2, illegal_syscall
jalr t2 # Do The Real Thing (TM)
syscall_trace_entry:
SAVE_STATIC
- move s0, t2
+ move s0, v0
move a0, sp
/*
1: jal syscall_trace_enter
- bltz v0, 2f # seccomp failed? Skip syscall
+ bltz v0, 1f # seccomp failed? Skip syscall
+
+ move v0, s0 # restore syscall
- move t0, s0
RESTORE_STATIC
lw a0, PT_R4(sp) # Restore argument registers
lw a1, PT_R5(sp)
lw a2, PT_R6(sp)
lw a3, PT_R7(sp)
- jalr t0
-
- li t0, -EMAXERRNO - 1 # error?
- sltu t0, t0, v0
- sw t0, PT_R7(sp) # set error flag
- beqz t0, 1f
-
- lw t1, PT_R2(sp) # syscall number
- negu v0 # error
- sw t1, PT_R0(sp) # save it for syscall restarting
-1: sw v0, PT_R2(sp) # result
+ j syscall_common
-2: j syscall_exit
+1: j syscall_exit
/* ------------------------------------------------------------------------ */
.set at
#endif
- dsubu t0, v0, __NR_64_Linux # check syscall number
- sltiu t0, t0, __NR_64_Linux_syscalls + 1
#if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32)
ld t1, PT_EPC(sp) # skip syscall on return
daddiu t1, 4 # skip to next instruction
sd t1, PT_EPC(sp)
#endif
- beqz t0, illegal_syscall
-
- dsll t0, v0, 3 # offset into table
- ld t2, (sys_call_table - (__NR_64_Linux * 8))(t0)
- # syscall routine
sd a3, PT_R26(sp) # save a3 for syscall restarting
and t0, t1, t0
bnez t0, syscall_trace_entry
+syscall_common:
+ dsubu t2, v0, __NR_64_Linux
+ sltiu t0, t2, __NR_64_Linux_syscalls + 1
+ beqz t0, illegal_syscall
+
+ dsll t0, t2, 3 # offset into table
+ dla t2, sys_call_table
+ daddu t0, t2, t0
+ ld t2, (t0) # syscall routine
+ beqz t2, illegal_syscall
+
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
syscall_trace_entry:
SAVE_STATIC
- move s0, t2
+ move s0, v0
move a0, sp
move a1, v0
jal syscall_trace_enter
- bltz v0, 2f # seccomp failed? Skip syscall
+ bltz v0, 1f # seccomp failed? Skip syscall
- move t0, s0
+ move v0, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
- jalr t0
-
- li t0, -EMAXERRNO - 1 # error?
- sltu t0, t0, v0
- sd t0, PT_R7(sp) # set error flag
- beqz t0, 1f
-
- ld t1, PT_R2(sp) # syscall number
- dnegu v0 # error
- sd t1, PT_R0(sp) # save it for syscall restarting
-1: sd v0, PT_R2(sp) # result
+ j syscall_common
-2: j syscall_exit
+1: j syscall_exit
illegal_syscall:
/* This also isn't a 64-bit syscall, throw an error. */
and t0, t1, t0
bnez t0, n32_syscall_trace_entry
+syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
move a1, v0
jal syscall_trace_enter
- bltz v0, 2f # seccomp failed? Skip syscall
+ bltz v0, 1f # seccomp failed? Skip syscall
- move t0, s0
+ move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a3, PT_R7(sp)
ld a4, PT_R8(sp)
ld a5, PT_R9(sp)
- jalr t0
+ j syscall_common
- li t0, -EMAXERRNO - 1 # error?
- sltu t0, t0, v0
- sd t0, PT_R7(sp) # set error flag
- beqz t0, 1f
-
- ld t1, PT_R2(sp) # syscall number
- dnegu v0 # error
- sd t1, PT_R0(sp) # save it for syscall restarting
-1: sd v0, PT_R2(sp) # result
-
-2: j syscall_exit
+1: j syscall_exit
not_n32_scall:
/* This is not an n32 compatibility syscall, pass it on to
and t0, t1, t0
bnez t0, trace_a_syscall
+syscall_common:
jalr t2 # Do The Real Thing (TM)
li t0, -EMAXERRNO - 1 # error?
1: jal syscall_trace_enter
- bltz v0, 2f # seccomp failed? Skip syscall
+ bltz v0, 1f # seccomp failed? Skip syscall
- move t0, s0
+ move t2, s0
RESTORE_STATIC
ld a0, PT_R4(sp) # Restore argument registers
ld a1, PT_R5(sp)
ld a5, PT_R9(sp)
ld a6, PT_R10(sp)
ld a7, PT_R11(sp) # For indirect syscalls
- jalr t0
+ j syscall_common
- li t0, -EMAXERRNO - 1 # error?
- sltu t0, t0, v0
- sd t0, PT_R7(sp) # set error flag
- beqz t0, 1f
-
- ld t1, PT_R2(sp) # syscall number
- dnegu v0 # error
- sd t1, PT_R0(sp) # save it for syscall restarting
-1: sd v0, PT_R2(sp) # result
-
-2: j syscall_exit
+1: j syscall_exit
/* ------------------------------------------------------------------------ */