[ARM] colibri: fix support for DM9000 ethernet device

Two changes are necessary to enable proper operation of the DM9000 device with
the Colibri PXA 270 board: firstly, the IRQ type needs to be configured for
rising edge interrupts, and secondly this configuration needs to be
communicated through to the DM9000.

[[email protected]: remove set_irq_type() call as per ben-linux request]
Signed-off-by: Michael Abbott <[email protected]>
Cc: Daniel Mack <[email protected]>
Cc: Jeff Garzik <[email protected]>
Cc: Ben Dooks <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Russell King <[email protected]>

diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 43bf5a183e90da539d757505a4031d482ed4deb1..574839d7c1328c1c83f4c354b7cb51800c3f8516 100644 (file)
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -98,7 +98,7 @@ static struct resource dm9000_resources[] = {
        [2] = {
                .start  = COLIBRI_ETH_IRQ,
                .end    = COLIBRI_ETH_IRQ,
-               .flags  = IORESOURCE_IRQ,
+               .flags  = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
        },
 };
 
@@ -119,7 +119,6 @@ static void __init colibri_init(void)
        /* DM9000 LAN */
        pxa_gpio_mode(GPIO78_nCS_2_MD);
        pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-       set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
 
        platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }