ASoC: fsl_esai: Fix divisor calculation failure at lower ratio

When the desired ratio is less than 256, the savesub (tolerance)
in the calculation would become 0. This will then fail the loop-
search immediately without reporting any errors.

But if the ratio is smaller enough, there is no need to calculate
the tolerance because PM divisor alone is enough to get the ratio.

So a simple fix could be just to set PM directly instead of going
into the loop-search.

Reported-by: Marek Vasut <[email protected]>
Signed-off-by: Nicolin Chen <[email protected]>
Tested-by: Marek Vasut <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Cc: [email protected]

diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 40a700493f4c8f0d3dec67956ee8afb8b20c37f3..da8fd98c7f51c2a1ee3116a00d17d8820bb3582d 100644 (file)
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -144,6 +144,13 @@ static int fsl_esai_divisor_cal(struct snd_soc_dai *dai, bool tx, u32 ratio,
 
        psr = ratio <= 256 * maxfp ? ESAI_xCCR_xPSR_BYPASS : ESAI_xCCR_xPSR_DIV8;
 
+       /* Do not loop-search if PM (1 ~ 256) alone can serve the ratio */
+       if (ratio <= 256) {
+               pm = ratio;
+               fp = 1;
+               goto out;
+       }
+
        /* Set the max fluctuation -- 0.1% of the max devisor */
        savesub = (psr ? 1 : 8)  * 256 * maxfp / 1000;