rcar_gen3: plat: Add initial D3 support

Add R-Car D3 SoC platform specifics. Driver, PFC, QoS, DDR init code
will be added separately.

Signed-off-by: Marek Vasut <[email protected]>

diff --git a/drivers/renesas/rcar/board/board.c b/drivers/renesas/rcar/board/board.c
index f15e06bc08c3d3329deb060bc9737e6e15cecbab..8c4eec24c4e0b868c7c7535506ec8e40f6fa535b 100644 (file)
--- a/drivers/renesas/rcar/board/board.c
+++ b/drivers/renesas/rcar/board/board.c
@@ -14,7 +14,9 @@
 #include "board.h"
 
 #ifndef BOARD_DEFAULT
-#if (RCAR_LSI == RCAR_E3)
+#if (RCAR_LSI == RCAR_D3)
+#define BOARD_DEFAULT          (BOARD_DRAAK << BOARD_CODE_SHIFT)
+#elif (RCAR_LSI == RCAR_E3)
 #define BOARD_DEFAULT          (BOARD_EBISU << BOARD_CODE_SHIFT)
 #else
 #define BOARD_DEFAULT          (BOARD_SALVATOR_X << BOARD_CODE_SHIFT)
@@ -32,6 +34,7 @@
 #define SK_ID  { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
 #define EB4_ID { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
 #define EB_ID  { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
+#define DR_ID  { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
 #define KK_ID  { 0x10U, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU, 0xFFU }
 
 const char *g_board_tbl[] = {
@@ -42,6 +45,7 @@ const char *g_board_tbl[] = {
        [BOARD_EBISU_4D] = "Ebisu-4D",
        [BOARD_KRIEK] = "Kriek",
        [BOARD_EBISU] = "Ebisu",
+       [BOARD_DRAAK] = "Draak",
        [BOARD_UNKNOWN] = "unknown"
 };
 
@@ -55,6 +59,7 @@ int32_t rcar_get_board_type(uint32_t *type, uint32_t *rev)
                [BOARD_SALVATOR_X] = SX_ID,
                [BOARD_EBISU_4D] = EB4_ID,
                [BOARD_EBISU] = EB_ID,
+               [BOARD_DRAAK] = DR_ID,
                [BOARD_KRIEK] = KK_ID,
        };
        static uint8_t board_id = BOARD_ID_UNKNOWN;

diff --git a/drivers/renesas/rcar/board/board.h b/drivers/renesas/rcar/board/board.h
index 7bb2a0626b12d39139b67870643c8eec59859bc9..05c4e8aa14a40382e33842f592408f691ce4165f 100644 (file)
--- a/drivers/renesas/rcar/board/board.h
+++ b/drivers/renesas/rcar/board/board.h
@@ -15,7 +15,8 @@
 #define BOARD_EBISU                    (0x08)
 #define BOARD_STARTER_KIT_PRE          (0x0B)
 #define BOARD_EBISU_4D                 (0x0DU)
-#define BOARD_UNKNOWN                  (BOARD_EBISU_4D + 1U)
+#define BOARD_DRAAK                    (0x0EU)
+#define BOARD_UNKNOWN                  (BOARD_DRAAK + 1U)
 
 #define BOARD_REV_UNKNOWN              (0xFF)
 

diff --git a/plat/renesas/rcar/bl2_cpg_init.c b/plat/renesas/rcar/bl2_cpg_init.c
index 1dff69035b122ee86628199d3973e3d1f51a09c0..673217297fba2664adb9144ccddedd77dd10c64b 100644 (file)
--- a/plat/renesas/rcar/bl2_cpg_init.c
+++ b/plat/renesas/rcar/bl2_cpg_init.c
@@ -33,6 +33,11 @@ static void bl2_realtime_cpg_init_e3(void);
 static void bl2_system_cpg_init_e3(void);
 #endif
 
+#if (RCAR_LSI == RCAR_AUTO) || (RCAR_LSI == RCAR_D3)
+static void bl2_realtime_cpg_init_d3(void);
+static void bl2_system_cpg_init_d3(void);
+#endif
+
 typedef struct {
        uintptr_t adr;
        uint32_t val;
@@ -41,21 +46,39 @@ typedef struct {
 static void bl2_secure_cpg_init(void)
 {
        uint32_t stop_cr2, reset_cr2;
+       uint32_t stop_cr4, reset_cr4;
+       uint32_t stop_cr5, reset_cr5;
 
-#if (RCAR_LSI == RCAR_E3)
+#if (RCAR_LSI == RCAR_D3)
+       reset_cr2 = 0x00000000U;
+       stop_cr2 = 0xFFFFFFFFU;
+#elif (RCAR_LSI == RCAR_E3)
        reset_cr2 = 0x10000000U;
        stop_cr2 = 0xEFFFFFFFU;
 #else
        reset_cr2 = 0x14000000U;
        stop_cr2 = 0xEBFFFFFFU;
 #endif
+
+#if (RCAR_LSI == RCAR_D3)
+       reset_cr4 = 0x00000000U;
+       stop_cr4 = 0xFFFFFFFFU;
+       reset_cr5 = 0x00000000U;
+       stop_cr5 = 0xFFFFFFFFU;
+#else
+       reset_cr4 = 0x80000003U;
+       stop_cr4 = 0x7FFFFFFFU;
+       reset_cr5 = 0x40000000U;
+       stop_cr5 = 0xBFFFFFFFU;
+#endif
+
        /** Secure Module Stop Control Registers */
        cpg_write(SCMSTPCR0, 0xFFFFFFFFU);
        cpg_write(SCMSTPCR1, 0xFFFFFFFFU);
        cpg_write(SCMSTPCR2, stop_cr2);
        cpg_write(SCMSTPCR3, 0xFFFFFFFFU);
-       cpg_write(SCMSTPCR4, 0x7FFFFFFFU);
-       cpg_write(SCMSTPCR5, 0xBFFFFFFFU);
+       cpg_write(SCMSTPCR4, stop_cr4);
+       cpg_write(SCMSTPCR5, stop_cr5);
        cpg_write(SCMSTPCR6, 0xFFFFFFFFU);
        cpg_write(SCMSTPCR7, 0xFFFFFFFFU);
        cpg_write(SCMSTPCR8, 0xFFFFFFFFU);
@@ -68,8 +91,8 @@ static void bl2_secure_cpg_init(void)
        cpg_write(SCSRSTECR1, 0x00000000U);
        cpg_write(SCSRSTECR2, reset_cr2);
        cpg_write(SCSRSTECR3, 0x00000000U);
-       cpg_write(SCSRSTECR4, 0x80000003U);
-       cpg_write(SCSRSTECR5, 0x40000000U);
+       cpg_write(SCSRSTECR4, reset_cr4);
+       cpg_write(SCSRSTECR5, reset_cr5);
        cpg_write(SCSRSTECR6, 0x00000000U);
        cpg_write(SCSRSTECR7, 0x00000000U);
        cpg_write(SCSRSTECR8, 0x00000000U);
@@ -229,6 +252,42 @@ static void bl2_system_cpg_init_e3(void)
 }
 #endif
 
+#if (RCAR_LSI == RCAR_AUTO) || (RCAR_LSI == RCAR_D3)
+static void bl2_realtime_cpg_init_d3(void)
+{
+       /* Realtime Module Stop Control Registers */
+       cpg_write(RMSTPCR0, 0x00010000U);
+       cpg_write(RMSTPCR1, 0xFFFFFFFFU);
+       cpg_write(RMSTPCR2, 0x00060FDCU);
+       cpg_write(RMSTPCR3, 0xFFFFFFDFU);
+       cpg_write(RMSTPCR4, 0x80000184U);
+       cpg_write(RMSTPCR5, 0x83FFFFFFU);
+       cpg_write(RMSTPCR6, 0xFFFFFFFFU);
+       cpg_write(RMSTPCR7, 0xFFFFFFFFU);
+       cpg_write(RMSTPCR8, 0x00F1FFF7U);
+       cpg_write(RMSTPCR9, 0xF3F5E016U);
+       cpg_write(RMSTPCR10, 0xFFFEFFE0U);
+       cpg_write(RMSTPCR11, 0x000000B7U);
+}
+
+static void bl2_system_cpg_init_d3(void)
+{
+       /* System Module Stop Control Registers */
+       cpg_write(SMSTPCR0, 0x00010000U);
+       cpg_write(SMSTPCR1, 0xFFFFFFFFU);
+       cpg_write(SMSTPCR2, 0x00060FDCU);
+       cpg_write(SMSTPCR3, 0xFFFFFBDFU);
+       cpg_write(SMSTPCR4, 0x00000084U);
+       cpg_write(SMSTPCR5, 0x83FFFFFFU);
+       cpg_write(SMSTPCR6, 0xFFFFFFFFU);
+       cpg_write(SMSTPCR7, 0xFFFFFFFFU);
+       cpg_write(SMSTPCR8, 0x00F1FFF7U);
+       cpg_write(SMSTPCR9, 0xF3F5E016U);
+       cpg_write(SMSTPCR10, 0xFFFEFFE0U);
+       cpg_write(SMSTPCR11, 0x000000B7U);
+}
+#endif
+
 void bl2_cpg_init(void)
 {
        uint32_t boot_cpu = mmio_read_32(RCAR_MODEMR) & MODEMR_BOOT_CPU_MASK;
@@ -254,6 +313,9 @@ void bl2_cpg_init(void)
                case RCAR_PRODUCT_E3:
                        bl2_realtime_cpg_init_e3();
                        break;
+               case RCAR_PRODUCT_D3:
+                       bl2_realtime_cpg_init_d3();
+                       break;
                default:
                        panic();
                        break;
@@ -266,6 +328,8 @@ void bl2_cpg_init(void)
                bl2_realtime_cpg_init_m3n();
 #elif RCAR_LSI == RCAR_E3
                bl2_realtime_cpg_init_e3();
+#elif RCAR_LSI == RCAR_D3
+               bl2_realtime_cpg_init_d3();
 #else
 #error "Don't have CPG initialize routine(unknown)."
 #endif
@@ -290,6 +354,9 @@ void bl2_system_cpg_init(void)
        case RCAR_PRODUCT_E3:
                bl2_system_cpg_init_e3();
                break;
+       case RCAR_PRODUCT_D3:
+               bl2_system_cpg_init_d3();
+               break;
        default:
                panic();
                break;
@@ -302,6 +369,8 @@ void bl2_system_cpg_init(void)
        bl2_system_cpg_init_m3n();
 #elif RCAR_LSI == RCAR_E3
        bl2_system_cpg_init_e3();
+#elif RCAR_LSI == RCAR_D3
+       bl2_system_cpg_init_d3();
 #else
 #error "Don't have CPG initialize routine(unknown)."
 #endif

diff --git a/plat/renesas/rcar/bl2_plat_setup.c b/plat/renesas/rcar/bl2_plat_setup.c
index 7442942c77f9fda47f09c8dfc2f82effb34a27ea..d21ddf5054bbf280b7a2e9aef719aebe8260c2bb 100644 (file)
--- a/plat/renesas/rcar/bl2_plat_setup.c
+++ b/plat/renesas/rcar/bl2_plat_setup.c
@@ -76,6 +76,9 @@ static void bl2_init_generic_timer(void);
 #elif RCAR_LSI == RCAR_E3
 #define TARGET_PRODUCT                 RCAR_PRODUCT_E3
 #define TARGET_NAME                    "R-Car E3"
+#elif RCAR_LSI == RCAR_D3
+#define TARGET_PRODUCT                 RCAR_PRODUCT_D3
+#define TARGET_NAME                    "R-Car D3"
 #elif RCAR_LSI == RCAR_AUTO
 #define TARGET_NAME                    "R-Car H3/M3/M3N"
 #endif
@@ -242,6 +245,9 @@ void bl2_plat_flush_bl31_params(void)
        if (product == RCAR_PRODUCT_H3 && RCAR_CUT_VER20 > cut)
                goto tlb;
 
+       if (product == RCAR_PRODUCT_D3)
+               goto tlb;
+
        /* Disable MFIS write protection */
        mmio_write_32(MFISWPCNTR, MFISWPCNTR_PASSWORD | 1);
 
@@ -430,6 +436,10 @@ static void bl2_populate_compatible_string(void *fdt)
                ret = fdt_setprop_string(fdt, 0, "compatible",
                                         "renesas,ebisu");
                break;
+       case BOARD_DRAAK:
+               ret = fdt_setprop_string(fdt, 0, "compatible",
+                                        "renesas,draak");
+               break;
        default:
                NOTICE("BL2: Cannot set compatible string, board unsupported\n");
                panic();
@@ -458,6 +468,10 @@ static void bl2_populate_compatible_string(void *fdt)
                ret = fdt_appendprop_string(fdt, 0, "compatible",
                                            "renesas,r8a77990");
                break;
+       case RCAR_PRODUCT_D3:
+               ret = fdt_appendprop_string(fdt, 0, "compatible",
+                                           "renesas,r8a77995");
+               break;
        default:
                NOTICE("BL2: Cannot set compatible string, SoC unsupported\n");
                panic();
@@ -598,6 +612,11 @@ static void bl2_advertise_dram_size(uint32_t product)
                dram_config[1] = 0x100000000ULL;
 #endif /* RCAR_DRAM_DDR3L_MEMCONF == 0 */
                break;
+
+       case RCAR_PRODUCT_D3:
+               /* 512MB */
+               dram_config[1] = 0x20000000ULL;
+               break;
        }
 
        bl2_advertise_dram_entries(dram_config);
@@ -617,6 +636,7 @@ void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
        const char *product_h3 = "H3";
        const char *product_m3 = "M3";
        const char *product_e3 = "E3";
+       const char *product_d3 = "D3";
        const char *lcs_secure = "SE";
        const char *lcs_cm = "CM";
        const char *lcs_dm = "DM";
@@ -629,7 +649,7 @@ void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
        const char *boot_qspi80 = "QSPI Flash(80MHz)";
        const char *boot_emmc25x1 = "eMMC(25MHz x1)";
        const char *boot_emmc50x8 = "eMMC(50MHz x8)";
-#if RCAR_LSI == RCAR_E3
+#if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3)
        const char *boot_hyper160 = "HyperFlash(150MHz)";
 #else
        const char *boot_hyper160 = "HyperFlash(160MHz)";
@@ -696,6 +716,9 @@ void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
        case RCAR_PRODUCT_E3:
                str = product_e3;
                break;
+       case RCAR_PRODUCT_D3:
+               str = product_d3;
+               break;
        default:
                str = unknown;
                break;
@@ -736,6 +759,7 @@ void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
        case BOARD_EBISU:
        case BOARD_STARTER_KIT_PRE:
        case BOARD_EBISU_4D:
+       case BOARD_DRAAK:
                break;
        default:
                type = BOARD_UNKNOWN;
@@ -774,9 +798,17 @@ void bl2_el3_early_platform_setup(u_register_t arg1, u_register_t arg2,
                str = boot_qspi80;
                break;
        case MODEMR_BOOT_DEV_EMMC_25X1:
+#if RCAR_LSI == RCAR_D3
+               ERROR("BL2: Failed to Initialize. eMMC is not supported.\n");
+               panic();
+#endif
                str = boot_emmc25x1;
                break;
        case MODEMR_BOOT_DEV_EMMC_50X8:
+#if RCAR_LSI == RCAR_D3
+               ERROR("BL2: Failed to Initialize. eMMC is not supported.\n");
+               panic();
+#endif
                str = boot_emmc50x8;
                break;
        default:
@@ -940,7 +972,9 @@ void bl2_platform_setup(void)
 
 static void bl2_init_generic_timer(void)
 {
-#if RCAR_LSI == RCAR_E3
+#if RCAR_LSI == RCAR_D3
+       uint32_t reg_cntfid = EXTAL_DRAAK;
+#elif RCAR_LSI == RCAR_E3
        uint32_t reg_cntfid = EXTAL_EBISU;
 #else /* RCAR_LSI == RCAR_E3 */
        uint32_t reg;

diff --git a/plat/renesas/rcar/bl2_secure_setting.c b/plat/renesas/rcar/bl2_secure_setting.c
index cbda1eb38139219ca4ff309fe4480a991d110b16..7473df5a21a5ca46e420c544dac2d273b2e1f401 100644 (file)
--- a/plat/renesas/rcar/bl2_secure_setting.c
+++ b/plat/renesas/rcar/bl2_secure_setting.c
@@ -52,7 +52,7 @@ static const struct {
            /*        1: Reserved[R-Car E3]                                 */
            /* Bit10: SCEG Secure Core slave ports                          */
            /*        0: registers accessed from secure resource only       */
-#if RCAR_LSI == RCAR_E3
+#if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3)
        {
        SEC_SEL6, 0xFFFFFBFFU},
 #else

diff --git a/plat/renesas/rcar/bl31_plat_setup.c b/plat/renesas/rcar/bl31_plat_setup.c
index 4e08b5a82ad4c170f0f2476bc91abc1d728f475e..add3e34f69ade029dfbe94a1ca10a3e5df996f7b 100644 (file)
--- a/plat/renesas/rcar/bl31_plat_setup.c
+++ b/plat/renesas/rcar/bl31_plat_setup.c
@@ -85,10 +85,12 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
 
        NOTICE("BL3-1 : Rev.%s\n", version_of_renesas);
 
+#if RCAR_LSI != RCAR_D3
        if (RCAR_CLUSTER_A53A57 == rcar_pwrc_get_cluster()) {
                plat_cci_init();
                plat_cci_enable();
        }
+#endif
 }
 
 void bl31_plat_arch_setup(void)

diff --git a/plat/renesas/rcar/include/platform_def.h b/plat/renesas/rcar/include/platform_def.h
index 934b2dcd9d81bf3907ec393581a70ec5ad7f9598..9f071bcc44f4182814ad4344118bb9afe5c614b7 100644 (file)
--- a/plat/renesas/rcar/include/platform_def.h
+++ b/plat/renesas/rcar/include/platform_def.h
@@ -103,14 +103,14 @@
 /* Put BL2 just below BL3-1. BL2_BASE is calculated using the current BL2 debug
  * size plus a little space for growth. */
 #define RCAR_SYSRAM_BASE               U(0xE6300000)
-#if RCAR_LSI == RCAR_E3
+#if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3)
 #define BL2_LIMIT                      U(0xE6320000)
 #else
 #define BL2_LIMIT                      U(0xE6360000)
 #endif
 
 #define BL2_BASE                       U(0xE6304000)
-#if RCAR_LSI == RCAR_E3
+#if (RCAR_LSI == RCAR_E3) || (RCAR_LSI == RCAR_D3)
 #define BL2_IMAGE_LIMIT                        U(0xE6318000)
 #else
 #define BL2_IMAGE_LIMIT                        U(0xE632E800)

diff --git a/plat/renesas/rcar/include/rcar_def.h b/plat/renesas/rcar/include/rcar_def.h
index 6bbd6fa7bb876da86863c9497c29abb31587ea78..9bf418fee1d7653c1c087ff4ba236841d93bc4cb 100644 (file)
--- a/plat/renesas/rcar/include/rcar_def.h
+++ b/plat/renesas/rcar/include/rcar_def.h
@@ -153,6 +153,7 @@
 #define RCAR_PRODUCT_M3                        U(0x00005200)
 #define RCAR_PRODUCT_M3N               U(0x00005500)
 #define RCAR_PRODUCT_E3                        U(0x00005700)
+#define RCAR_PRODUCT_D3                        U(0x00005800)
 #define RCAR_CUT_VER10                 U(0x00000000)
 #define RCAR_CUT_VER11                 U(0x00000001)   /* H3/M3N/E3 Ver.1.1 */
 #define RCAR_M3_CUT_VER11              U(0x00000010)   /* M3 Ver.1.1/Ver.1.2 */
@@ -205,6 +206,7 @@
 #define        EXTAL_MD14_MD13_TYPE_3          U(16666600)     /* MD14=1 MD13=1 */
 #define        EXTAL_SALVATOR_XS               U(8320000)      /* Salvator-XS */
 #define EXTAL_EBISU                    U(24000000)     /* Ebisu */
+#define EXTAL_DRAAK                    U(24000000)     /* Draak */
 /* CPG write protect registers         */
 #define        CPGWPR_PASSWORD                 (0x5A5AFFFFU)
 #define        CPGWPCR_PASSWORD                (0xA5A50000U)

diff --git a/plat/renesas/rcar/plat_pm.c b/plat/renesas/rcar/plat_pm.c
index 47eda9a0218fe4b82866b8a21298f7b3330bbc9e..f41c172a995910aa943b9ef497924b27252a0931 100644 (file)
--- a/plat/renesas/rcar/plat_pm.c
+++ b/plat/renesas/rcar/plat_pm.c
@@ -92,18 +92,22 @@ static void rcar_pwr_domain_on_finish(const psci_power_state_t *target_state)
 
 static void rcar_pwr_domain_off(const psci_power_state_t *target_state)
 {
+#if RCAR_LSI != RCAR_D3
        uint32_t cluster_type = rcar_pwrc_get_cluster();
+#endif
        unsigned long mpidr = read_mpidr_el1();
 
        gicv2_cpuif_disable();
        rcar_pwrc_cpuoff(mpidr);
 
+#if RCAR_LSI != RCAR_D3
        if (CLUSTER_PWR_STATE(target_state) == PLAT_MAX_OFF_STATE) {
                if (cluster_type == RCAR_CLUSTER_A53A57)
                        plat_cci_disable();
 
                rcar_pwrc_clusteroff(mpidr);
        }
+#endif
 }
 
 static void rcar_pwr_domain_suspend(const psci_power_state_t *target_state)

diff --git a/plat/renesas/rcar/platform.mk b/plat/renesas/rcar/platform.mk
index 715b8ae170c7b847dacf79739d2795309b11235a..5eb20fc8775d1dce0931df759832305af8910647 100644 (file)
--- a/plat/renesas/rcar/platform.mk
+++ b/plat/renesas/rcar/platform.mk
@@ -29,12 +29,14 @@ RCAR_M3:=1
 RCAR_M3N:=2
 RCAR_E3:=3
 RCAR_H3N:=4
+RCAR_D3:=5
 RCAR_AUTO:=99
 $(eval $(call add_define,RCAR_H3))
 $(eval $(call add_define,RCAR_M3))
 $(eval $(call add_define,RCAR_M3N))
 $(eval $(call add_define,RCAR_E3))
 $(eval $(call add_define,RCAR_H3N))
+$(eval $(call add_define,RCAR_D3))
 $(eval $(call add_define,RCAR_AUTO))
 RCAR_CUT_10:=0
 RCAR_CUT_11:=1
@@ -143,6 +145,21 @@ else
       endif
       $(eval $(call add_define,RCAR_LSI_CUT))
     endif
+  else ifeq (${LSI},D3)
+    RCAR_LSI:=${RCAR_D3}
+    ifndef LSI_CUT
+      # enable compatible function.
+      RCAR_LSI_CUT_COMPAT := 1
+      $(eval $(call add_define,RCAR_LSI_CUT_COMPAT))
+    else
+      # disable compatible function.
+      ifeq (${LSI_CUT},10)
+        RCAR_LSI_CUT:=0
+      else
+        $(error "Error: ${LSI_CUT} is not supported.")
+      endif
+      $(eval $(call add_define,RCAR_LSI_CUT))
+    endif
   else
     $(error "Error: ${LSI} is not supported.")
   endif

diff --git a/tools/renesas/rcar_layout_create/makefile b/tools/renesas/rcar_layout_create/makefile
index b3af401c5dc99aafb86cc1d7caca0c17b45789e8..d5857549bd0b749e0888156a2b3bfe0b433d3821 100644 (file)
--- a/tools/renesas/rcar_layout_create/makefile
+++ b/tools/renesas/rcar_layout_create/makefile
@@ -55,6 +55,15 @@ endif
 endif
 $(eval $(call add_define,RCAR_SA6_TYPE))
 
+# Handle different VMA adjustment on D3
+ifeq (${RCAR_LSI},${RCAR_D3})
+RCAR_VMA_ADJUST_ADDR := 0xE6320000
+else
+RCAR_VMA_ADJUST_ADDR := 0xE6312000
+endif
+$(eval $(call add_define,RCAR_VMA_ADJUST_ADDR))
+
+
 ###################################################
 
 #c compiler
@@ -88,8 +97,8 @@ $(OUTPUT_FILE_SA0) : $(MEMORY_DEF_SA0) $(OBJ_FILE_SA0)
        -o $(OUTPUT_FILE_SA0)                   \
        -Map $(FILE_NAME_SA0).map               \
 
-       $(objcopy) -O srec --adjust-vma=0xE6320000 --srec-forceS3  $(OUTPUT_FILE_SA0) $(FILE_NAME_SA0).srec
-       $(objcopy) -O binary --adjust-vma=0xE6320000 --srec-forceS3  $(OUTPUT_FILE_SA0) $(FILE_NAME_SA0).bin
+       $(objcopy) -O srec --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA0) $(FILE_NAME_SA0).srec
+       $(objcopy) -O binary --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA0) $(FILE_NAME_SA0).bin
 
 $(OUTPUT_FILE_SA6) : $(MEMORY_DEF_SA6) $(OBJ_FILE_SA6)
        $(LD) $(OBJ_FILE_SA6)                   \
@@ -97,8 +106,8 @@ $(OUTPUT_FILE_SA6) : $(MEMORY_DEF_SA6) $(OBJ_FILE_SA6)
        -o $(OUTPUT_FILE_SA6)                   \
        -Map $(FILE_NAME_SA6).map               \
 
-       $(objcopy) -O srec --adjust-vma=0xE6320000 --srec-forceS3  $(OUTPUT_FILE_SA6) $(FILE_NAME_SA6).srec
-       $(objcopy) -O binary --adjust-vma=0xE6320000 --srec-forceS3  $(OUTPUT_FILE_SA6) $(FILE_NAME_SA6).bin
+       $(objcopy) -O srec --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA6) $(FILE_NAME_SA6).srec
+       $(objcopy) -O binary --adjust-vma=$(RCAR_VMA_ADJUST_ADDR) --srec-forceS3  $(OUTPUT_FILE_SA6) $(FILE_NAME_SA6).bin
 
 ###################################################
 # Compile

diff --git a/tools/renesas/rcar_layout_create/sa0.c b/tools/renesas/rcar_layout_create/sa0.c
index b902d3373a71e54833eabacdb5a0b999cdddb65b..79354eca6f1c4a794a22f2ad861173f4b18b33db 100644 (file)
--- a/tools/renesas/rcar_layout_create/sa0.c
+++ b/tools/renesas/rcar_layout_create/sa0.c
@@ -4,7 +4,7 @@
  * SPDX-License-Identifier: BSD-3-Clause
  */
 
-#define RCAR_SA0_SIZE_SMALL    (0)     /* for E3 */
+#define RCAR_SA0_SIZE_SMALL    (0)     /* for E3/D3 */
 #define RCAR_SA0_SIZE_NORMAL   (1)     /* for H3/M3/M3N */
 
 #define BL2_ADDRESS    (0xE6304000)    /* BL2 start address */