ar71xx: add support for TP-Link Archer C58 v1

TP-Link Archer C58 v1 is a dual-band AC1350 router, based on Qualcomm
QCA9561 + QCA9886. It looks like Archer C59 v1 without USB port.

Specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 8 MB of FLASH (SPI NOR)
- 3T3R 2.4 GHz
- 2T2R 5 GHz
- 5x 10/100 Mbps Ethernet
- 6x LED, 3x button
- UART header on PCB, RX, TX at TP4+5 (backside)

QCA9886 wlan needs pre_cal_data file and enable ieee80211 phy hotplug to
patch macaddress.

Flash instruction:

Use "factory" image directly in vendor GUI.

Recovery method:

1. Set PC to fixed ip address 192.168.0.66/24.
2. Download "lede-ar71xx-generic-archer-c58-v1-squashfs-factory.bin" and
   rename it to "tp_recovery.bin".
3. Start a tftp server with the file "tp_recovery.bin" in its root
   directory.
4. Turn off the router.
5. Press and hold Reset button.
6. Turn on router with the reset button pressed and wait ~15 seconds.
7. Release the reset button and after a short time the firmware should
   be transferred from the tftp server.
8. Wait ~30 second to complete recovery.

Flash instruction under U-Boot, using UART:

tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin
erase 0x9f020000 +$filesize
cp.b $fileaddr 0x9f020000 $filesize
reset

This commit is based on GitHub PR#1112

Signed-off-by: Henryk Heisig <[email protected]>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 83bbd23b763d1baca933ed81bb4acf1b0847b0c6..cc5b583f7ce9b90f110a25ccfeca4afa353d48c4 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -341,6 +341,41 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "file-system",
        },
 
+       /** Firmware layout for the C58v1 */
+       {
+               .id     = "ARCHER-C58-V1",
+               .vendor = "",
+               .support_list =
+                       "SupportList:\r\n"
+                       "{product_name:Archer C58,product_ver:1.0.0,special_id:00000000}\r\n"
+                       "{product_name:Archer C58,product_ver:1.0.0,special_id:45550000}\r\n"
+                       "{product_name:Archer C58,product_ver:1.0.0,special_id:55530000}\r\n",
+               .support_trail = '\x00',
+               .soft_ver = "soft_ver:1.0.0\n",
+
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x10000},
+                       {"default-mac", 0x10000, 0x00200},
+                       {"pin", 0x10200, 0x00200},
+                       {"product-info", 0x10400, 0x00100},
+                       {"partition-table", 0x10500, 0x00800},
+                       {"soft-version", 0x11300, 0x00200},
+                       {"support-list", 0x11500, 0x00100},
+                       {"device-id", 0x11600, 0x00100},
+                       {"profile", 0x11700, 0x03900},
+                       {"default-config", 0x15000, 0x04000},
+                       {"user-config", 0x19000, 0x04000},
+                       {"os-image", 0x20000, 0x150000},
+                       {"file-system", 0x170000, 0x678000},
+                       {"certyficate", 0x7e8000, 0x08000},
+                       {"radio", 0x7f0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "file-system",
+       },
+
        /** Firmware layout for the C59v1 */
        {
                .id     = "ARCHER-C59-V1",