sunxi: Add defconfig for Sinlinx SinA31s

The Sinlinx A31s SDK is a A31s based module/baseboard development kit.

The core module has the SoC, PMIC, DRAM, eMMC and supporting components.
There are also pads for UART0, JTAG and I2S.

The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0
hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume
buttons, RS232 style UART and USB OTG (though VBUS is not connected).
Various headers are available for other addon modules, such as SDIO
WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs.

Signed-off-by: Chen-Yu Tsai <[email protected]>
Acked-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index c5761452dfdc6c3250c5b87ab09214a0e4cd43bd..cc6d972a63306feea2f481b831385af04ee42dbe 100644 (file)
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -195,6 +195,12 @@ M: Siarhei Siamashka <[email protected]>
 S:     Maintained
 F:     configs/MSI_Primo81_defconfig
 
+SINLINX SINA31s BOARD
+M:     Chen-Yu Tsai <[email protected]>
+S:     Maintained
+F:     configs/Sinlinx_SinA31s_defconfig
+W:     http://linux-sunxi.org/Sinlinx_SinA31s
+
 SINLINX SINA33 BOARD
 M:     Chen-Yu Tsai <[email protected]>
 S:     Maintained

diff --git a/configs/Sinlinx_SinA31s_defconfig b/configs/Sinlinx_SinA31s_defconfig
new file mode 100644 (file)
index 0000000..9254bb2
--- /dev/null
+++ b/configs/Sinlinx_SinA31s_defconfig
@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN6I=y
+CONFIG_DRAM_CLK=432
+CONFIG_DRAM_ZQ=251
+CONFIG_MMC0_CD_PIN="PA4"
+CONFIG_MMC3_PINS="PC"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=3
+CONFIG_USB1_VBUS_PIN=""
+CONFIG_USB2_VBUS_PIN=""
+CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31s-sina31s"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_AXP_DLDO1_VOLT=3300
+CONFIG_USB_EHCI_HCD=y