[ARM] pxa: remove WAKEUP_ON_LEVEL_HIGH from keypad direct keys

Setting PKWR bits on those pins will make the resuming from
low power state to fail.

Signed-off-by: Eric Miao <[email protected]>
Signed-off-by: Russell King <[email protected]>

diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 6c3c37ccf5867cfe084e797886327cda2c63c3cf..5b145fa739604d58cfe1cfcd6d00047715e63a38 100644 (file)
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -110,9 +110,9 @@ static unsigned long mainstone_pin_config[] = {
        GPIO45_AC97_SYSCLK,
 
        /* Keypad */
-       GPIO93_KP_DKIN_0        | WAKEUP_ON_LEVEL_HIGH,
-       GPIO94_KP_DKIN_1        | WAKEUP_ON_LEVEL_HIGH,
-       GPIO95_KP_DKIN_2        | WAKEUP_ON_LEVEL_HIGH,
+       GPIO93_KP_DKIN_0,
+       GPIO94_KP_DKIN_1,
+       GPIO95_KP_DKIN_2,
        GPIO100_KP_MKIN_0       | WAKEUP_ON_LEVEL_HIGH,
        GPIO101_KP_MKIN_1       | WAKEUP_ON_LEVEL_HIGH,
        GPIO102_KP_MKIN_2       | WAKEUP_ON_LEVEL_HIGH,