CPU: MediaTek MT7628AN @ 575 MHz
Flash: 16 MB
RAM: 128 MB
Ethernet: 10/100Mbps x 1
Wlan: 300 Mbps
USB: USB 2.0 x 1
LED: red/green x 1
Button: reset x 1
1. Open https://www.hiwifi.wtf/, Get Cloud token and unlock ssh
2. Upload the openwrt firmware to the router via SCP
3. Login the router via SSH
4. Run `mtd -r write path_to_firmware.bin firmware`
I have tested on my device.
- The LED will display RED on power-on, After system start completed, trun GREEN
- Reset button working now. Long press after 5s will reset factory. Short press less 1s will reboot the device
- USB can working under official u-boot
Signed-off-by: Senis John <[email protected]>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7628an_hiwifi_hc5x61a.dtsi"
+
+/ {
+ compatible = "hiwifi,hc5611", "mediatek,mt7628an-soc";
+ model = "HiWiFi HC5611";
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_system: system {
+ label = "green:system";
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ internet {
+ label = "red:internet";
+ gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "gpio", "spi cs1", "wdt";
+ function = "gpio";
+ };
+};
endef
TARGET_DEVICES += hilink_hlk-7688a
+define Device/hiwifi_hc5611
+ IMAGE_SIZE := 15808k
+ DEVICE_VENDOR := HiWiFi
+ DEVICE_MODEL := HC5611
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
+endef
+TARGET_DEVICES += hiwifi_hc5611
+
define Device/hiwifi_hc5661a
IMAGE_SIZE := 15808k
DEVICE_VENDOR := HiWiFi
hilink,hlk-7688a)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
;;
+hiwifi,hc5611)
+ ucidef_set_led_netdev "internet" "internet" "red:internet" "br-lan" "tx rx"
+ ;;
hiwifi,hc5661a|\
hiwifi,hc5761a)
ucidef_set_led_switch "internet" "internet" "blue:internet" "switch0" "0x10"
glinet,microuter-n300|\
glinet,vixmini|\
hak5,wifi-pineapple-mk7|\
+ hiwifi,hc5611|\
mediatek,linkit-smart-7688|\
minew,g1-c|\
onion,omega2p|\
zyxel,keenetic-extra-ii)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1)
;;
+ hiwifi,hc5611|\
hiwifi,hc5661a|\
hiwifi,hc5761a|\
hiwifi,hc5861b)
board=$(board_name)
case "$board" in
+ hiwifi,hc5611|\
hiwifi,hc5661a|\
hiwifi,hc5761a|\
hiwifi,hc5861b)