gpio: max732x: fix input configuration for open-drain pins

Fix a bug I noticed while hacking on the max732x driver for interrupt
support.  According to the datasheets, open-drain pins have to be
configured as output-high (which in that case is actually high impedance)
to be used as input.

Signed-off-by: Marc Zyngier <[email protected]>
Acked-by: Eric Miao <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

diff --git a/drivers/gpio/max732x.c b/drivers/gpio/max732x.c
index 26ff40110d9f4a672d7aafa24279ddd0ccfd2963..9cad60f9e9620f249bf1c01f38346455476405bb 100644 (file)
--- a/drivers/gpio/max732x.c
+++ b/drivers/gpio/max732x.c
@@ -232,6 +232,13 @@ static int max732x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
                return -EACCES;
        }
 
+       /*
+        * Open-drain pins must be set to high impedance (which is
+        * equivalent to output-high) to be turned into an input.
+        */
+       if ((mask & chip->dir_output))
+               max732x_gpio_set_value(gc, off, 1);
+
        return 0;
 }