RFC for WL1251 idle mode support brought a few issues that are worth to
update before adding the idle mode support.
Since the idle mode can reuse the code that is now used in Power Save Mode
(PSM), the flag psm in struct wl1251 is changed to variable station_mode
to be able to distinguish between PSM and idle modes.
As the station mode is different than the power power save mode command
that is sent to chip, the enum wl1251_cmd_ps_mod values are used only when
communicating with the chip and new enum wl1251_station_mode values are used
inside the driver.
Confusing comment about psm and elp relation is removed since the PSM is
actually activated by putting the chip into Entreme Low Power (ELP) mode.
Signed-off-by: Jarkko Nikula <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
} __packed;
enum wl1251_cmd_ps_mode {
- STATION_ACTIVE_MODE,
- STATION_POWER_SAVE_MODE
+ CHIP_ACTIVE_MODE,
+ CHIP_POWER_SAVE_MODE
};
struct wl1251_cmd_ps_params {
if (vector & BSS_LOSE_EVENT_ID) {
wl1251_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
- if (wl->psm_requested && wl->psm) {
+ if (wl->psm_requested &&
+ wl->station_mode != STATION_ACTIVE_MODE) {
ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
if (ret < 0)
return ret;
}
}
- if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID && wl->psm) {
+ if (vector & SYNCHRONIZATION_TIMEOUT_EVENT_ID &&
+ wl->station_mode != STATION_ACTIVE_MODE) {
wl1251_debug(DEBUG_EVENT, "SYNCHRONIZATION_TIMEOUT_EVENT");
/* indicate to the stack, that beacons have been lost */
wl->rx_last_id = 0;
wl->next_tx_complete = 0;
wl->elp = false;
- wl->psm = 0;
+ wl->station_mode = STATION_ACTIVE_MODE;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
wl->rssi_thold = 0;
wl->psm_requested = false;
- if (wl->psm) {
+ if (wl->station_mode != STATION_ACTIVE_MODE) {
ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE);
if (ret < 0)
goto out_sleep;
wl->rx_config = WL1251_DEFAULT_RX_CONFIG;
wl->rx_filter = WL1251_DEFAULT_RX_FILTER;
wl->elp = false;
- wl->psm = 0;
+ wl->station_mode = STATION_ACTIVE_MODE;
wl->psm_requested = false;
wl->tx_queue_stopped = false;
wl->power_level = WL1251_DEFAULT_POWER_LEVEL;
mutex_lock(&wl->mutex);
- if (wl->elp || !wl->psm)
+ if (wl->elp || wl->station_mode == STATION_ACTIVE_MODE)
goto out;
wl1251_debug(DEBUG_PSM, "chip to elp");
{
unsigned long delay;
- if (wl->psm) {
+ if (wl->station_mode != STATION_ACTIVE_MODE) {
delay = msecs_to_jiffies(ELP_ENTRY_DELAY);
ieee80211_queue_delayed_work(wl->hw, &wl->elp_work, delay);
}
return 0;
}
-int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode)
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_station_mode mode)
{
int ret;
if (ret < 0)
return ret;
- ret = wl1251_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
+ ret = wl1251_cmd_ps_mode(wl, CHIP_POWER_SAVE_MODE);
if (ret < 0)
return ret;
ret = wl1251_acx_sleep_auth(wl, WL1251_PSM_ELP);
if (ret < 0)
return ret;
-
- wl->psm = 1;
break;
case STATION_ACTIVE_MODE:
default:
if (ret < 0)
return ret;
- ret = wl1251_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
+ ret = wl1251_cmd_ps_mode(wl, CHIP_ACTIVE_MODE);
if (ret < 0)
return ret;
- wl->psm = 0;
break;
}
+ wl->station_mode = mode;
return ret;
}
#include "wl1251.h"
#include "acx.h"
-int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode);
+int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_station_mode mode);
void wl1251_ps_elp_sleep(struct wl1251 *wl);
int wl1251_ps_elp_wakeup(struct wl1251 *wl);
void wl1251_elp_work(struct work_struct *work);
PART_TABLE_LEN
};
+enum wl1251_station_mode {
+ STATION_ACTIVE_MODE,
+ STATION_POWER_SAVE_MODE,
+};
+
struct wl1251_partition {
u32 size;
u32 start;
struct delayed_work elp_work;
- /* we can be in psm, but not in elp, we have to differentiate */
- bool psm;
+ enum wl1251_station_mode station_mode;
/* PSM mode requested */
bool psm_requested;