The maximum output width of one pipeline depends on the LayerMixer's
capability. It may be different on each target. Also, MDP5 doesn't
have vertical limitation in one frame, as long as the pixel clock
can be supported.
This change obtains the maximum LM resolution from configuration
table and treat it as the whole pipe's limitation for MDP5. The size
limit on MDP4 is not changed.
Signed-off-by: Hai Li <[email protected]>
goto fail;
}
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.max_width = 2048;
+ dev->mode_config.max_height = 2048;
+
return kms;
fail:
.count = 5,
.base = { 0x03200, 0x03600, 0x03a00, 0x03e00, 0x04200 },
.nb_stages = 5,
+ .max_width = 2048,
+ .max_height = 0xFFFF,
},
.dspp = {
.count = 3,
.count = 6,
.base = { 0x03a00, 0x03e00, 0x04200, 0x04600, 0x04a00, 0x04e00 },
.nb_stages = 5,
+ .max_width = 2048,
+ .max_height = 0xFFFF,
},
.dspp = {
.count = 4,
.count = 2, /* LM0 and LM3 */
.base = { 0x45000, 0x48000 },
.nb_stages = 5,
+ .max_width = 2048,
+ .max_height = 0xFFFF,
},
.dspp = {
.count = 1,
.count = 6,
.base = { 0x45000, 0x46000, 0x47000, 0x48000, 0x49000, 0x4a000 },
.nb_stages = 8,
+ .max_width = 2048,
+ .max_height = 0xFFFF,
},
.dspp = {
.count = 4,
struct mdp5_lm_block {
MDP5_SUB_BLOCK_DEFINITION;
uint32_t nb_stages; /* number of stages per blender */
+ uint32_t max_width; /* Maximum output resolution */
+ uint32_t max_height;
};
struct mdp5_ctl_block {
goto fail;
}
+ dev->mode_config.min_width = 0;
+ dev->mode_config.min_height = 0;
+ dev->mode_config.max_width = config->hw->lm.max_width;
+ dev->mode_config.max_height = config->hw->lm.max_height;
+
return kms;
fail:
}
}
- dev->mode_config.min_width = 0;
- dev->mode_config.min_height = 0;
- dev->mode_config.max_width = 2048;
- dev->mode_config.max_height = 2048;
dev->mode_config.funcs = &mode_config_funcs;
ret = drm_vblank_init(dev, priv->num_crtcs);