mmc: core: Fix voltage select in DDR mode

This patch fixes the wrong comparison before setting the interface
voltage in DDR mode.

The assignment to the variable ddr before comaprison is either
ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison
is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V.

Signed-off-by: Girish K S <[email protected]>
Acked-by: Subhash Jadavani <[email protected]>
Acked-by: Philip Rakity <[email protected]>
Cc: <[email protected]>
Signed-off-by: Chris Ball <[email protected]>

diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 006e932a3ae354a6fa15948016857328ae291aaa..f0a9f1fbd1f609cef2b4facced07b91e79ed5c57 100644 (file)
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -1058,7 +1058,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
                         *
                         * WARNING: eMMC rules are NOT the same as SD DDR
                         */
-                       if (ddr == EXT_CSD_CARD_TYPE_DDR_1_2V) {
+                       if (ddr == MMC_1_2V_DDR_MODE) {
                                err = mmc_set_signal_voltage(host,
                                        MMC_SIGNAL_VOLTAGE_120, 0);
                                if (err)