regulator: palmas: Fix calcuating selector in palmas_map_voltage_smps

The logic of calculating selector in palmas_map_voltage_smps() does not match
the logic to list voltage in palmas_list_voltage_smps().

We use below equation to calculate voltage when selector > 0:
        voltage = (0.49V + (selector * 0.01V)) * RANGE
RANGE is either x1 or x2

So we need to take into account with the multiplier set in VSEL register when
calculating selector in palmas_map_voltage_smps()

Signed-off-by: Axel Lin <[email protected]>
Acked-by: Graeme Gregory <[email protected]>
Signed-off-by: Mark Brown <[email protected]>

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index 7540c95321cee89e641d1c2ae9a5d2bb8c0011d9..17d19fbbc490156c8507301808863411a5f3135f 100644 (file)
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -373,11 +373,22 @@ static int palmas_set_voltage_smps_sel(struct regulator_dev *dev,
 static int palmas_map_voltage_smps(struct regulator_dev *rdev,
                int min_uV, int max_uV)
 {
+       struct palmas_pmic *pmic = rdev_get_drvdata(rdev);
+       int id = rdev_get_id(rdev);
        int ret, voltage;
 
-       ret = ((min_uV - 500000) / 10000) + 1;
-       if (ret < 0)
-               return ret;
+       if (min_uV == 0)
+               return 0;
+
+       if (pmic->range[id]) { /* RANGE is x2 */
+               if (min_uV < 1000000)
+                       min_uV = 1000000;
+               ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 1;
+       } else {                /* RANGE is x1 */
+               if (min_uV < 500000)
+                       min_uV = 500000;
+               ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 1;
+       }
 
        /* Map back into a voltage to verify we're still in bounds */
        voltage = palmas_list_voltage_smps(rdev, ret);