sdhci-of: fix high-speed cards recognition

eSDHC fails to recognize some SDHS cards, throwing timeout errors:

  mmc0: error -110 whilst initialising SD card

That's because we calculate timeout value in a wrong way: on eSDHC hosts
the timeout clock is derivied from the SD clock, which is set dynamically.

As David Vrabel suggested, deriving timeout clock from SD clock is a
common scheme, so let's implement DATA_TIMEOUT_USES_SDCLK quirk and use it
for eSDHC hosts.

Also, from now on we don't need esdhc_get_timeout_clock() callback, so
remove it.

Signed-off-by: Anton Vorontsov <[email protected]>
Cc: Pierre Ossman <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: David Vrabel <[email protected]>
Cc: Ben Dooks <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index 3439fc1189042d1f4a4ee23d8cf2f72fb551fd67..56041dc74ce180e60ba0fffbea3985414f87f774 100644 (file)
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -172,19 +172,13 @@ static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
        return of_host->clock / 256 / 16;
 }
 
-static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host)
-{
-       struct sdhci_of_host *of_host = sdhci_priv(host);
-
-       return of_host->clock / 1000;
-}
-
 static struct sdhci_of_data sdhci_esdhc = {
        .quirks = SDHCI_QUIRK_FORCE_BLK_SZ_2048 |
                  SDHCI_QUIRK_BROKEN_CARD_DETECTION |
                  SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
                  SDHCI_QUIRK_NO_BUSY_IRQ |
                  SDHCI_QUIRK_NONSTANDARD_CLOCK |
+                 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
                  SDHCI_QUIRK_PIO_NEEDS_DELAY |
                  SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET |
                  SDHCI_QUIRK_NO_CARD_NO_RESET,
@@ -199,7 +193,6 @@ static struct sdhci_of_data sdhci_esdhc = {
                .enable_dma = esdhc_enable_dma,
                .get_max_clock = esdhc_get_max_clock,
                .get_min_clock = esdhc_get_min_clock,
-               .get_timeout_clock = esdhc_get_timeout_clock,
        },
 };
 

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 7f7f45b4b07bc057db0c54232a011095462b043b..38a78743fc51b9640bea4432ee585745dd4797fa 100644 (file)
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -591,6 +591,9 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_data *data)
        target_timeout = data->timeout_ns / 1000 +
                data->timeout_clks / host->clock;
 
+       if (host->quirks & SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)
+               host->timeout_clk = host->clock / 1000;
+
        /*
         * Figure out needed cycles.
         * We do this in steps in order to fit inside a 32 bit int.
@@ -1757,13 +1760,15 @@ int sdhci_add_host(struct sdhci_host *host)
        host->timeout_clk =
                (caps & SDHCI_TIMEOUT_CLK_MASK) >> SDHCI_TIMEOUT_CLK_SHIFT;
        if (host->timeout_clk == 0) {
-               if (!host->ops->get_timeout_clock) {
+               if (host->ops->get_timeout_clock) {
+                       host->timeout_clk = host->ops->get_timeout_clock(host);
+               } else if (!(host->quirks &
+                               SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
                        printk(KERN_ERR
                               "%s: Hardware doesn't specify timeout clock "
                               "frequency.\n", mmc_hostname(mmc));
                        return -ENODEV;
                }
-               host->timeout_clk = host->ops->get_timeout_clock(host);
        }
        if (caps & SDHCI_TIMEOUT_CLK_UNIT)
                host->timeout_clk *= 1000;

diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index c77e9ff30223c44ff86da33a2f8a51c18570c520..afda7f126e0de6cc096e54224b1ac03cbe27feaf 100644 (file)
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -232,6 +232,8 @@ struct sdhci_host {
 #define SDHCI_QUIRK_FORCE_1_BIT_DATA                   (1<<22)
 /* Controller needs 10ms delay between applying power and clock */
 #define SDHCI_QUIRK_DELAY_AFTER_POWER                  (1<<23)
+/* Controller uses SDCLK instead of TMCLK for data timeouts */
+#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK            (1<<24)
 
        int                     irq;            /* Device IRQ */
        void __iomem *          ioaddr;         /* Mapped address */