Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some
used the EEPROM ops, leading to issues in tx power handling, since those
two can be out of sync.
Disable the feature by default, since it has been reported that it can
cause damage to the rx path under some circumstances. It can now be enabled
for testing via debugfs.
Signed-off-by: Felix Fietkau <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
case EEP_RX_MASK:
return pBase->txrxMask & 0xf;
case EEP_PAPRD:
+ if (AR_SREV_9462(ah))
+ return false;
+ if (!ah->config.enable_paprd);
+ return false;
return !!(pBase->featureEnable & BIT(5));
case EEP_CHAIN_MASK_REDUCE:
return (pBase->miscConfiguration >> 0x3) & 0x1;
sc->debug.debugfs_phy, sc, &fops_tx_chainmask);
debugfs_create_file("disable_ani", S_IRUSR | S_IWUSR,
sc->debug.debugfs_phy, sc, &fops_disable_ani);
+ debugfs_create_bool("paprd", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
+ &sc->sc_ah->config.enable_paprd);
debugfs_create_file("regidx", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
sc, &fops_regidx);
debugfs_create_file("regval", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy,
pCap->rx_status_len = sizeof(struct ar9003_rxs);
pCap->tx_desc_len = sizeof(struct ar9003_txc);
pCap->txs_len = sizeof(struct ar9003_txs);
- if (!ah->config.paprd_disable &&
- ah->eep_ops->get_eeprom(ah, EEP_PAPRD) &&
- !AR_SREV_9462(ah))
- pCap->hw_caps |= ATH9K_HW_CAP_PAPRD;
} else {
pCap->tx_desc_len = sizeof(struct ath_desc);
if (AR_SREV_9280_20(ah))
ATH9K_HW_CAP_LDPC = BIT(6),
ATH9K_HW_CAP_FASTCLOCK = BIT(7),
ATH9K_HW_CAP_SGI_20 = BIT(8),
- ATH9K_HW_CAP_PAPRD = BIT(9),
ATH9K_HW_CAP_ANT_DIV_COMB = BIT(10),
ATH9K_HW_CAP_2GHZ = BIT(11),
ATH9K_HW_CAP_5GHZ = BIT(12),
u8 pcie_clock_req;
u32 pcie_waen;
u8 analog_shiftreg;
- u8 paprd_disable;
u32 ofdm_trig_low;
u32 ofdm_trig_high;
u32 cck_trig_high;
u32 cck_trig_low;
u32 enable_ani;
+ u32 enable_paprd;
int serialize_regmode;
bool rx_intr_mitigation;
bool tx_intr_mitigation;
cal_interval = min(cal_interval, (u32)short_cal_interval);
mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval));
- if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) {
+ if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && ah->caldata) {
if (!ah->caldata->paprd_done)
ieee80211_queue_work(sc->hw, &sc->paprd_work);
else if (!ah->paprd_table_write_done)