airoha: an7583: Add missing DTS for EMMC RFB board

While adding support for Airoha AN7583, it was forget to push the EMMC
DTS while defining the variant in the image Makefile.

Add the missing DTS to fix image creation error.

Signed-off-by: Christian Marangi <[email protected]>

diff --git a/target/linux/airoha/dts/an7583-evb-emmc.dts b/target/linux/airoha/dts/an7583-evb-emmc.dts
new file mode 100644 (file)
index 0000000..df5ee5b
--- /dev/null
+++ b/target/linux/airoha/dts/an7583-evb-emmc.dts
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "an7583.dtsi"
+
+/ {
+       model = "Airoha AN7583 Evaluation Board";
+       compatible = "airoha,an7583-evb", "airoha,an7583", "airoha,en7583";
+
+       aliases {
+               serial0 = &uart1;
+       };
+
+       chosen {
+               bootargs = "console=ttyS0,115200 earlycon";
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x0 0x80000000 0x2 0x00000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               btn-reset {
+                       label = "reset";
+                       linux,code = <BTN_0>;
+                       gpios = <&an7583_pinctrl 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               led-1 {
+                       label = "pon";
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&an7583_pinctrl 12 GPIO_ACTIVE_LOW>;
+               };
+
+               led-2 {
+                       label = "internet";
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&an7583_pinctrl 26 GPIO_ACTIVE_LOW>;
+               };
+
+               led-3 {
+                       label = "wps";
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&an7583_pinctrl 31 GPIO_ACTIVE_LOW>;
+               };
+
+               led-4 {
+                       label = "los";
+                       color = <LED_COLOR_ID_RED>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&an7583_pinctrl 27 GPIO_ACTIVE_LOW>;
+               };
+
+               led-5 {
+                       label = "voip_hook";
+                       color = <LED_COLOR_ID_GREEN>;
+                       function = LED_FUNCTION_STATUS;
+                       gpios = <&an7583_pinctrl 29 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&an7583_pinctrl {
+       gpio-ranges = <&an7583_pinctrl 0 2 53>;
+
+       mdio0_pins: mdio0-pins {
+               conf {
+                       pins = "mdio_0";
+                       output-high;
+               };
+       };
+
+       pcie0_rst_pins: pcie0-rst-pins {
+               conf {
+                       pins = "pcie_reset0";
+                       drive-open-drain = <1>;
+               };
+       };
+
+       pcie1_rst_pins: pcie1-rst-pins {
+               conf {
+                       pins = "pcie_reset1";
+                       drive-open-drain = <1>;
+               };
+       };
+
+       gswp1_led0_pins: gswp1-led0-pins {
+               mux {
+                       function = "phy1_led0";
+                       pins = "gpio1";
+               };
+       };
+
+       gswp2_led0_pins: gswp2-led0-pins {
+               mux {
+                       function = "phy2_led0";
+                       pins = "gpio2";
+               };
+       };
+
+       gswp3_led0_pins: gswp3-led0-pins {
+               mux {
+                       function = "phy3_led0";
+                       pins = "gpio3";
+               };
+       };
+
+       gswp4_led0_pins: gswp4-led0-pins {
+               mux {
+                       function = "phy4_led0";
+                       pins = "gpio4";
+               };
+       };
+
+       mmc_pins: mmc-pins {
+               mux {
+                       function = "emmc";
+                       groups = "emmc";
+               };
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default", "state_uhs";
+       pinctrl-0 = <&mmc_pins>;
+       pinctrl-1 = <&mmc_pins>;
+       status = "okay";
+
+       #address-cells = <1>;
+       #size-cells = <0>;
+
+       card@0 {
+               compatible = "mmc-card";
+               reg = <0>;
+
+               block {
+                       compatible = "block-device";
+                       partitions {
+                               block-partition-factory {
+                                       partname = "art";
+
+                                       nvmem-layout {
+                                               compatible = "fixed-layout";
+                                               #address-cells = <1>;
+                                               #size-cells = <1>;
+
+                                               eeprom_factory_0: eeprom@0 {
+                                                       reg = <0x40000 0x1e00>;
+                                               };
+
+                                               mac_factory_2c0000: mac@2c0000 {
+                                                       reg = <0x2c0000 0x6>;
+                                               };
+
+                                               pon_mac_factory_2c0006: pon_mac@2c0006 {
+                                                       reg = <0x2c0006 0x6>;
+                                               };
+
+                                               onu_type_factory_2e0000: onu_type@2e0000 {
+                                                       reg = <0x2e0000 0x10>;
+                                               };
+
+                                               board_config_factory_2e0010: board_config@2e0010 {
+                                                       reg = <0x2e0010 0x8>;
+                                               };
+                                       };
+                               };
+                       };
+               };
+       };
+};
+
+&i2c0 {
+       status = "okay";
+};
+
+&i2c1 {
+       status = "okay";
+};
+
+&mdio_0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mdio0_pins>;
+
+       en8811: ethernet-phy@f {
+               reg = <0xf>;
+
+               reset-gpios = <&an7583_pinctrl 28 GPIO_ACTIVE_LOW>;
+               reset-assert-us = <10000>;
+               reset-deassert-us = <20000>;
+
+               leds {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       led@0 {
+                               reg = <0>;
+                               function = LED_FUNCTION_LAN;
+                               color = <LED_COLOR_ID_GREEN>;
+                               function-enumerator = <0>;
+                               default-state = "keep";
+                       };
+
+                       led@1 {
+                               reg = <1>;
+                               function = LED_FUNCTION_LAN;
+                               color = <LED_COLOR_ID_GREEN>;
+                               function-enumerator = <1>;
+                               default-state = "keep";
+                       };
+               };
+       };
+};
+
+&eth {
+       status = "okay";
+       nvmem-cells = <&mac_factory_2c0000>;
+       nvmem-cell-names = "mac";
+};
+
+&gdm1 {
+       status = "okay";
+};
+
+&gdm3 {
+       status = "okay";
+
+       phy-handle = <&en8811>;
+       phy-mode = "2500base-x";
+};
+
+&switch {
+       status = "okay";
+};
+
+&gsw_phy1 {
+       pinctrl-names = "gbe-led";
+       pinctrl-0 = <&gswp1_led0_pins>;
+       status = "okay";
+};
+
+&gsw_phy1_led0 {
+       status = "okay";
+       active-low;
+};
+
+&gsw_phy2 {
+       pinctrl-names = "gbe-led";
+       pinctrl-0 = <&gswp2_led0_pins>;
+       status = "okay";
+};
+
+&gsw_phy2_led0 {
+       status = "okay";
+       active-low;
+};
+
+&gsw_phy3 {
+       pinctrl-names = "gbe-led";
+       pinctrl-0 = <&gswp3_led0_pins>;
+       status = "okay";
+};
+
+&gsw_phy3_led0 {
+       status = "okay";
+       active-low;
+};
+
+&gsw_phy4 {
+       pinctrl-names = "gbe-led";
+       pinctrl-0 = <&gswp4_led0_pins>;
+       status = "okay";
+};
+
+&gsw_phy4_led0 {
+       status = "okay";
+       active-low;
+};