When BT FTP/PAN transmits while WLAN is idle, the one of 9462 chain
often picks up BT's tx signal and starts receiving. If the current
weight is set to be higher than BT tx, BT tx will be aborted and this
also degrades BT performance. Hence lower WLAN rx priority in this
case only when there are no WLAN traffic.
Signed-off-by: Rajkumar Manoharan <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
u8 defant;
u8 rxotherant;
u32 *rxlink;
+ u32 num_pkts;
unsigned int rxfilter;
spinlock_t rxbuflock;
struct list_head rxbuf;
u32 btcoex_period; /* in usec */
u32 btscan_no_stomp; /* in usec */
u32 duty_cycle;
+ u32 bt_wait_time;
struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
struct ath_mci_profile mci;
};
enum ath_stomp_type stomp_type)
{
struct ath_btcoex_hw *btcoex = &ah->btcoex_hw;
- const u32 *weight = AR_SREV_9462(ah) ? ar9003_wlan_weights[stomp_type] :
- ar9462_wlan_weights[stomp_type];
+ const u32 *weight = ar9003_wlan_weights[stomp_type];
int i;
+ if (AR_SREV_9462(ah)) {
+ if ((stomp_type == ATH_BTCOEX_STOMP_LOW) &&
+ btcoex->mci.stomp_ftp)
+ stomp_type = ATH_BTCOEX_STOMP_LOW_FTP;
+ weight = ar9462_wlan_weights[stomp_type];
+ }
+
for (i = 0; i < AR9300_NUM_WLAN_WEIGHTS; i++) {
btcoex->bt_weight[i] = AR9300_BT_WGHT;
btcoex->wlan_weight[i] = weight[i];
#define ATH_BT_CNT_THRESHOLD 3
#define ATH_BT_CNT_SCAN_THRESHOLD 15
+#define ATH_BTCOEX_RX_WAIT_TIME 100
+#define ATH_BTCOEX_STOMP_FTP_THRESH 5
+
#define AR9300_NUM_BT_WEIGHTS 4
#define AR9300_NUM_WLAN_WEIGHTS 4
/* Defines the BT AR_BT_COEX_WGHT used */
u8 bt_ver_major;
u8 bt_ver_minor;
u8 bt_state;
+ u8 stomp_ftp;
};
struct ath_btcoex_hw {
struct ath_softc *sc = (struct ath_softc *) data;
struct ath_hw *ah = sc->sc_ah;
struct ath_btcoex *btcoex = &sc->btcoex;
+ struct ath_mci_profile *mci = &btcoex->mci;
u32 timer_period;
bool is_btscan;
ath_detect_bt_priority(sc);
is_btscan = test_bit(BT_OP_SCAN, &btcoex->op_flags);
+ btcoex->bt_wait_time += btcoex->btcoex_period;
+ if (btcoex->bt_wait_time > ATH_BTCOEX_RX_WAIT_TIME) {
+ if (ar9003_mci_state(ah, MCI_STATE_NEED_FTP_STOMP, NULL) &&
+ (mci->num_pan || mci->num_other_acl))
+ ah->btcoex_hw.mci.stomp_ftp =
+ (sc->rx.num_pkts < ATH_BTCOEX_STOMP_FTP_THRESH);
+ else
+ ah->btcoex_hw.mci.stomp_ftp = false;
+ btcoex->bt_wait_time = 0;
+ sc->rx.num_pkts = 0;
+ }
+
spin_lock_bh(&btcoex->btcoex_lock);
ath9k_hw_btcoex_bt_stomp(ah, is_btscan ? ATH_BTCOEX_STOMP_ALL :
else
rs.is_mybeacon = false;
+ sc->rx.num_pkts++;
ath_debug_stat_rx(sc, &rs);
/*