ARM: imx: apalis_imx6: Drop ad-hoc SATA binding

Drop the ad-hoc AHCI binding code, this is superseded by
CONFIG_DWC_AHSATA_AHCI=y resp. drivers/ata/dwc_ahsata.c

Signed-off-by: Marek Vasut <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Marcel Ziswiler <[email protected]>
Cc: Max Krummenacher <[email protected]>
Cc: Stefan Agner <[email protected]>
Cc: Stefano Babic <[email protected]>
Acked-by: Marcel Ziswiler <[email protected]>

diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 3e59185438063bb4e33a5f59e6e0a22c93c8671b..b502d4ef1359db3bd622ea1c5f6dc334a1326ecc 100644 (file)
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -1131,52 +1131,3 @@ U_BOOT_DEVICE(mxc_serial) = {
        .name = "serial_mxc",
        .platdata = &mxc_serial_plat,
 };
-
-#if CONFIG_IS_ENABLED(AHCI)
-static int sata_imx_probe(struct udevice *dev)
-{
-       int i, err;
-
-       for (i = 0; i < APALIS_IMX6_SATA_INIT_RETRIES; i++) {
-               err = setup_sata();
-               if (err) {
-                       printf("SATA setup failed: %d\n", err);
-                       return err;
-               }
-
-               udelay(100);
-
-               err = dwc_ahsata_probe(dev);
-               if (!err)
-                       break;
-
-               /* There is no device on the SATA port */
-               if (sata_dm_port_status(0, 0) == 0)
-                       break;
-
-               /* There's a device, but link not established. Retry */
-               device_remove(dev, DM_REMOVE_NORMAL);
-       }
-
-       return 0;
-}
-
-struct ahci_ops sata_imx_ops = {
-       .port_status = dwc_ahsata_port_status,
-       .reset  = dwc_ahsata_bus_reset,
-       .scan   = dwc_ahsata_scan,
-};
-
-static const struct udevice_id sata_imx_ids[] = {
-       { .compatible = "fsl,imx6q-ahci" },
-       { }
-};
-
-U_BOOT_DRIVER(sata_imx) = {
-       .name           = "dwc_ahci",
-       .id             = UCLASS_AHCI,
-       .of_match       = sata_imx_ids,
-       .ops            = &sata_imx_ops,
-       .probe          = sata_imx_probe,
-};
-#endif /* AHCI */