net: fec: only check queue 0 if RXF_0/TXF_0 interrupt is set

Before queue 0 was always checked if any queue caused an interrupt.
It is better to just mark queue 0 if queue 0 has caused an interrupt.

Signed-off-by: Troy Kisky <[email protected]>
Acked-by: Fugang Duan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 56f56d6ada9cfdfa6f719eb6d9793efb3a614ccd..464055fb33d55559705fd5f1051f2a4ebeb09cb6 100644 (file)
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -1559,14 +1559,14 @@ fec_enet_collect_events(struct fec_enet_private *fep, uint int_events)
        if (int_events == 0)
                return false;
 
-       if (int_events & FEC_ENET_RXF)
+       if (int_events & FEC_ENET_RXF_0)
                fep->work_rx |= (1 << 2);
        if (int_events & FEC_ENET_RXF_1)
                fep->work_rx |= (1 << 0);
        if (int_events & FEC_ENET_RXF_2)
                fep->work_rx |= (1 << 1);
 
-       if (int_events & FEC_ENET_TXF)
+       if (int_events & FEC_ENET_TXF_0)
                fep->work_tx |= (1 << 2);
        if (int_events & FEC_ENET_TXF_1)
                fep->work_tx |= (1 << 0);