--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+/ {
+ soc {
+ ddr: ddr@0x5A003000{
+
+ compatible = "st,stm32mp1-ddr";
+
+ reg = <0x5A003000 0x550
+ 0x5A004000 0x234>;
+
+ clocks = <&rcc AXIDCG>,
+ <&rcc DDRC1>,
+ <&rcc DDRC2>,
+ <&rcc DDRPHYC>,
+ <&rcc DDRCAPB>,
+ <&rcc DDRPHYCAPB>;
+
+ clock-names = "axidcg",
+ "ddrc1",
+ "ddrc2",
+ "ddrphyc",
+ "ddrcapb",
+ "ddrphycapb";
+
+ st,mem-name = DDR_MEM_NAME;
+ st,mem-speed = <DDR_MEM_SPEED>;
+ st,mem-size = <DDR_MEM_SIZE>;
+
+ st,ctl-reg = <
+ DDR_MSTR
+ DDR_MRCTRL0
+ DDR_MRCTRL1
+ DDR_DERATEEN
+ DDR_DERATEINT
+ DDR_PWRCTL
+ DDR_PWRTMG
+ DDR_HWLPCTL
+ DDR_RFSHCTL0
+ DDR_RFSHCTL3
+ DDR_CRCPARCTL0
+ DDR_ZQCTL0
+ DDR_DFITMG0
+ DDR_DFITMG1
+ DDR_DFILPCFG0
+ DDR_DFIUPD0
+ DDR_DFIUPD1
+ DDR_DFIUPD2
+ DDR_DFIPHYMSTR
+ DDR_ODTMAP
+ DDR_DBG0
+ DDR_DBG1
+ DDR_DBGCMD
+ DDR_POISONCFG
+ DDR_PCCFG
+ >;
+
+ st,ctl-timing = <
+ DDR_RFSHTMG
+ DDR_DRAMTMG0
+ DDR_DRAMTMG1
+ DDR_DRAMTMG2
+ DDR_DRAMTMG3
+ DDR_DRAMTMG4
+ DDR_DRAMTMG5
+ DDR_DRAMTMG6
+ DDR_DRAMTMG7
+ DDR_DRAMTMG8
+ DDR_DRAMTMG14
+ DDR_ODTCFG
+ >;
+
+ st,ctl-map = <
+ DDR_ADDRMAP1
+ DDR_ADDRMAP2
+ DDR_ADDRMAP3
+ DDR_ADDRMAP4
+ DDR_ADDRMAP5
+ DDR_ADDRMAP6
+ DDR_ADDRMAP9
+ DDR_ADDRMAP10
+ DDR_ADDRMAP11
+ >;
+
+ st,ctl-perf = <
+ DDR_SCHED
+ DDR_SCHED1
+ DDR_PERFHPR1
+ DDR_PERFLPR1
+ DDR_PERFWR1
+ DDR_PCFGR_0
+ DDR_PCFGW_0
+ DDR_PCFGQOS0_0
+ DDR_PCFGQOS1_0
+ DDR_PCFGWQOS0_0
+ DDR_PCFGWQOS1_0
+ DDR_PCFGR_1
+ DDR_PCFGW_1
+ DDR_PCFGQOS0_1
+ DDR_PCFGQOS1_1
+ DDR_PCFGWQOS0_1
+ DDR_PCFGWQOS1_1
+ >;
+
+ st,phy-reg = <
+ DDR_PGCR
+ DDR_ACIOCR
+ DDR_DXCCR
+ DDR_DSGCR
+ DDR_DCR
+ DDR_ODTCR
+ DDR_ZQ0CR1
+ DDR_DX0GCR
+ DDR_DX1GCR
+ DDR_DX2GCR
+ DDR_DX3GCR
+ >;
+
+ st,phy-timing = <
+ DDR_PTR0
+ DDR_PTR1
+ DDR_PTR2
+ DDR_DTPR0
+ DDR_DTPR1
+ DDR_DTPR2
+ DDR_MR0
+ DDR_MR1
+ DDR_MR2
+ DDR_MR3
+ >;
+
+ st,phy-cal = <
+ DDR_DX0DLLCR
+ DDR_DX0DQTR
+ DDR_DX0DQSTR
+ DDR_DX1DLLCR
+ DDR_DX1DQTR
+ DDR_DX1DQSTR
+ DDR_DX2DLLCR
+ DDR_DX2DQTR
+ DDR_DX2DQSTR
+ DDR_DX3DLLCR
+ DDR_DX3DQTR
+ DDR_DX3DQSTR
+ >;
+
+ status = "okay";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ */
+
+/* STM32MP157C ED1 and ED2 BOARD configuration
+ * 2x DDR3L 4Gb each, 16-bit, 533MHz, Single Die Package in flyby topology.
+ * Reference used NT5CC256M16DP-DI from NANYA
+ *
+ * DDR type / Platform DDR3/3L
+ * freq 533MHz
+ * width 32
+ * datasheet 0 = MT41J256M16-187 / DDR3-1066 bin G
+ * DDR density 8
+ * timing mode optimized
+ * Scheduling/QoS options : type = 2
+ * address mapping : RBC
+ */
+
+#define DDR_MEM_NAME "DDR3-1066 bin G 2x4Gb 533MHz v1.39"
+#define DDR_MEM_SPEED 533
+#define DDR_MEM_SIZE 0x40000000
+
+#define DDR_MSTR 0x00040401
+#define DDR_MRCTRL0 0x00000010
+#define DDR_MRCTRL1 0x00000000
+#define DDR_DERATEEN 0x00000000
+#define DDR_DERATEINT 0x00800000
+#define DDR_PWRCTL 0x00000000
+#define DDR_PWRTMG 0x00400010
+#define DDR_HWLPCTL 0x00000000
+#define DDR_RFSHCTL0 0x00210000
+#define DDR_RFSHCTL3 0x00000000
+#define DDR_RFSHTMG 0x0081008B
+#define DDR_CRCPARCTL0 0x00000000
+#define DDR_DRAMTMG0 0x121B2414
+#define DDR_DRAMTMG1 0x000A041C
+#define DDR_DRAMTMG2 0x0608090F
+#define DDR_DRAMTMG3 0x0050400C
+#define DDR_DRAMTMG4 0x08040608
+#define DDR_DRAMTMG5 0x06060403
+#define DDR_DRAMTMG6 0x02020002
+#define DDR_DRAMTMG7 0x00000202
+#define DDR_DRAMTMG8 0x00001005
+#define DDR_DRAMTMG14 0x000000A0
+#define DDR_ZQCTL0 0xC2000040
+#define DDR_DFITMG0 0x02060105
+#define DDR_DFITMG1 0x00000202
+#define DDR_DFILPCFG0 0x07000000
+#define DDR_DFIUPD0 0xC0400003
+#define DDR_DFIUPD1 0x00000000
+#define DDR_DFIUPD2 0x00000000
+#define DDR_DFIPHYMSTR 0x00000000
+#define DDR_ADDRMAP1 0x00080808
+#define DDR_ADDRMAP2 0x00000000
+#define DDR_ADDRMAP3 0x00000000
+#define DDR_ADDRMAP4 0x00001F1F
+#define DDR_ADDRMAP5 0x07070707
+#define DDR_ADDRMAP6 0x0F070707
+#define DDR_ADDRMAP9 0x00000000
+#define DDR_ADDRMAP10 0x00000000
+#define DDR_ADDRMAP11 0x00000000
+#define DDR_ODTCFG 0x06000600
+#define DDR_ODTMAP 0x00000001
+#define DDR_SCHED 0x00001201
+#define DDR_SCHED1 0x00000000
+#define DDR_PERFHPR1 0x01000001
+#define DDR_PERFLPR1 0x08000200
+#define DDR_PERFWR1 0x08000400
+#define DDR_DBG0 0x00000000
+#define DDR_DBG1 0x00000000
+#define DDR_DBGCMD 0x00000000
+#define DDR_POISONCFG 0x00000000
+#define DDR_PCCFG 0x00000010
+#define DDR_PCFGR_0 0x00010000
+#define DDR_PCFGW_0 0x00000000
+#define DDR_PCFGQOS0_0 0x02100B03
+#define DDR_PCFGQOS1_0 0x00800100
+#define DDR_PCFGWQOS0_0 0x01100B03
+#define DDR_PCFGWQOS1_0 0x01000200
+#define DDR_PCFGR_1 0x00010000
+#define DDR_PCFGW_1 0x00000000
+#define DDR_PCFGQOS0_1 0x02100B03
+#define DDR_PCFGQOS1_1 0x00800000
+#define DDR_PCFGWQOS0_1 0x01100B03
+#define DDR_PCFGWQOS1_1 0x01000200
+#define DDR_PGCR 0x01442E02
+#define DDR_PTR0 0x0022AA5B
+#define DDR_PTR1 0x04841104
+#define DDR_PTR2 0x042DA068
+#define DDR_ACIOCR 0x10400812
+#define DDR_DXCCR 0x00000C40
+#define DDR_DSGCR 0xF200001F
+#define DDR_DCR 0x0000000B
+#define DDR_DTPR0 0x38D488D0
+#define DDR_DTPR1 0x098B00D8
+#define DDR_DTPR2 0x10023600
+#define DDR_MR0 0x00000840
+#define DDR_MR1 0x00000000
+#define DDR_MR2 0x00000208
+#define DDR_MR3 0x00000000
+#define DDR_ODTCR 0x00010000
+#define DDR_ZQ0CR1 0x00000038
+#define DDR_DX0GCR 0x0000CE81
+#define DDR_DX0DLLCR 0x40000000
+#define DDR_DX0DQTR 0xFFFFFFFF
+#define DDR_DX0DQSTR 0x3DB02000
+#define DDR_DX1GCR 0x0000CE81
+#define DDR_DX1DLLCR 0x40000000
+#define DDR_DX1DQTR 0xFFFFFFFF
+#define DDR_DX1DQSTR 0x3DB02000
+#define DDR_DX2GCR 0x0000CE81
+#define DDR_DX2DLLCR 0x40000000
+#define DDR_DX2DQTR 0xFFFFFFFF
+#define DDR_DX2DQSTR 0x3DB02000
+#define DDR_DX3GCR 0x0000CE81
+#define DDR_DX3DLLCR 0x40000000
+#define DDR_DX3DQTR 0xFFFFFFFF
+#define DDR_DX3DQSTR 0x3DB02000
+
+#include "stm32mp15-ddr.dtsi"
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ */
+
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+/ {
+ soc {
+ pinctrl: pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x50002000 0xa400>;
+ pins-are-numbered;
+
+ gpioa: gpio@50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ status = "disabled";
+ };
+
+ gpiob: gpio@50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ status = "disabled";
+ };
+
+ gpioc: gpio@50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ status = "disabled";
+ };
+
+ gpiod: gpio@50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ status = "disabled";
+ };
+
+ gpioe: gpio@50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ status = "disabled";
+ };
+
+ gpiof: gpio@50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ status = "disabled";
+ };
+
+ gpiog: gpio@50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ status = "disabled";
+ };
+
+ gpioh: gpio@50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ status = "disabled";
+ };
+
+ gpioi: gpio@5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ status = "disabled";
+ };
+
+ gpioj: gpio@5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&rcc GPIOJ>;
+ st,bank-name = "GPIOJ";
+ status = "disabled";
+ };
+
+ gpiok: gpio@5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&rcc GPIOK>;
+ st,bank-name = "GPIOK";
+ status = "disabled";
+ };
+
+ uart4_pins_a: uart4@0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ usart3_pins_a: usart3@0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF7)>, /* USART3_TX */
+ <STM32_PINMUX('G', 8, AF8)>; /* USART3_RTS */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 12, AF8)>, /* USART3_RX */
+ <STM32_PINMUX('I', 10, AF8)>; /* USART3_CTS_NSS */
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4@0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir@0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4@0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_pins_a: sdmmc2-d47@0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <3>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+ };
+
+ pinctrl_z: pin-controller-z {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+
+ gpioz: gpio@54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&rcc GPIOZ>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ status = "disabled";
+ };
+
+ i2c4_pins_a: i2c4@0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ */
+
+/dts-v1/;
+
+#include "stm32mp157c.dtsi"
+#include "stm32mp157caa-pinctrl.dtsi"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-ED1 pmic eval daughter";
+ compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
+ stdout-path = "serial3:115200n8";
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+
+ pmic: stpmu1@33 {
+ compatible = "st,stpmu1";
+ reg = <0x33>;
+ status = "okay";
+
+ st,main_control_register = <0x04>;
+ st,vin_control_register = <0xc0>;
+ st,usb_control_register = <0x30>;
+
+ regulators {
+ compatible = "st,stpmu1-regulators";
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <8>;
+
+ regulator-state-standby {
+ regulator-suspend-microvolt = <3300000>;
+ regulator-unchanged-in-suspend;
+ regulator-mode = <8>;
+ };
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_sd: ldo5 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ regulator-boot-on;
+
+ regulator-state-standby {
+ regulator-suspend-microvolt = <2900000>;
+ regulator-unchanged-in-suspend;
+ };
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ regulator-state-disk {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&iwdg2 {
+ instance = <2>;
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&sdmmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
+ broken-cd;
+ st,dirpol;
+ st,negedge;
+ st,pin-ckin;
+ bus-width = <4>;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-ddr50;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&sdmmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ st,dirpol;
+ st,negedge;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ resets = <&rcc UART4_R>;
+ status = "okay";
+};
+
+/* ATF Specific */
+#include <dt-bindings/clock/stm32mp1-clksrc.h>
+#include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
+
+/ {
+ aliases {
+ gpio0 = &gpioa;
+ gpio1 = &gpiob;
+ gpio2 = &gpioc;
+ gpio3 = &gpiod;
+ gpio4 = &gpioe;
+ gpio5 = &gpiof;
+ gpio6 = &gpiog;
+ gpio7 = &gpioh;
+ gpio8 = &gpioi;
+ gpio9 = &gpioj;
+ gpio10 = &gpiok;
+ gpio25 = &gpioz;
+ i2c3 = &i2c4;
+ };
+
+ soc {
+ stgen: stgen@5C008000 {
+ compatible = "st,stm32-stgen";
+ reg = <0x5C008000 0x1000>;
+ status = "okay";
+ };
+ };
+};
+
+/* CLOCK init */
+&rcc {
+ st,clksrc = <
+ CLK_MPU_PLL1P
+ CLK_AXI_PLL2P
+ CLK_PLL12_HSE
+ CLK_PLL3_HSE
+ CLK_PLL4_HSE
+ CLK_RTC_LSE
+ CLK_MCO1_DISABLED
+ CLK_MCO2_DISABLED
+ >;
+
+ st,clkdiv = <
+ 1 /*MPU*/
+ 0 /*AXI*/
+ 1 /*APB1*/
+ 1 /*APB2*/
+ 1 /*APB3*/
+ 1 /*APB4*/
+ 2 /*APB5*/
+ 23 /*RTC*/
+ 0 /*MCO1*/
+ 0 /*MCO2*/
+ >;
+
+ st,pkcs = <
+ CLK_CKPER_HSE
+ CLK_FMC_ACLK
+ CLK_QSPI_ACLK
+ CLK_ETH_DISABLED
+ CLK_SDMMC12_PLL3R
+ CLK_DSI_DSIPLL
+ CLK_STGEN_HSE
+ CLK_USBPHY_HSE
+ CLK_SPI2S1_PLL3Q
+ CLK_SPI2S23_PLL3Q
+ CLK_SPI45_HSI
+ CLK_SPI6_HSI
+ CLK_I2C46_HSI
+ CLK_SDMMC3_PLL3R
+ CLK_USBO_USBPHY
+ CLK_ADC_CKPER
+ CLK_CEC_LSE
+ CLK_I2C12_HSI
+ CLK_I2C35_HSI
+ CLK_UART1_HSI
+ CLK_UART24_HSI
+ CLK_UART35_HSI
+ CLK_UART6_HSI
+ CLK_UART78_HSI
+ CLK_SPDIF_PLL3Q
+ CLK_FDCAN_PLL4Q
+ CLK_SAI1_PLL3Q
+ CLK_SAI2_PLL3Q
+ CLK_SAI3_PLL3Q
+ CLK_SAI4_PLL3Q
+ CLK_RNG1_CSI
+ CLK_RNG2_CSI
+ CLK_LPTIM1_PCLK1
+ CLK_LPTIM23_PCLK3
+ CLK_LPTIM45_PCLK3
+ >;
+
+ /* VCO = 1300.0 MHz => P = 650 (CPU) */
+ pll1: st,pll@0 {
+ cfg = < 2 80 0 0 0 PQR(1,0,0) >;
+ frac = < 0x800 >;
+ };
+
+ /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
+ pll2: st,pll@1 {
+ cfg = < 2 65 1 0 0 PQR(1,1,1) >;
+ frac = < 0x1400 >;
+ };
+
+ /* VCO = 786.4 MHz => P = 197, Q = 49, R = 98 */
+ pll3: st,pll@2 {
+ cfg = < 2 97 3 15 7 PQR(1,1,1) >;
+ frac = < 0x9ba >;
+ };
+
+ /* VCO = 508.0 MHz => P = 56, Q = 56, R = 56 */
+ pll4: st,pll@3 {
+ cfg = < 5 126 8 8 8 PQR(1,1,1) >;
+ };
+};
+
+/delete-node/ &clk_csi;
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ */
+
+/dts-v1/;
+#include "stm32mp157c-ed1.dts"
+
+/ {
+ model = "STMicroelectronics STM32MP157C-EV1 pmic eval daughter on eval mother";
+ compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
+ stdout-path = "serial3:115200n8";
+ };
+};
+
+&usart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usart3_pins_a>;
+ resets = <&rcc USART3_R>;
+ status = "disabled";
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ */
+
+#include <dt-bindings/clock/stm32mp1-clks.h>
+#include <dt-bindings/reset/stm32mp1-resets.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &usart1;
+ serial1 = &usart2;
+ serial2 = &usart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ serial5 = &usart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ };
+
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ clk_hsi: clk-hsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_lse: clk-lse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clk_lsi: clk-lsi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ };
+
+ clk_csi: clk-csi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <4000000>;
+ };
+
+ clk_i2s_ckin: i2s_ckin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <64000000>;
+ };
+
+ clk_dsi_phy: ck_dsi_phy {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clk_usbo_48m: ck_usbo_48m {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <48000000>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usart2: serial@4000e000 {
+ compatible = "st,stm32h7-usart";
+ reg = <0x4000e000 0x400>;
+ clocks = <&rcc USART2_K>;
+ status = "disabled";
+ };
+
+ usart3: serial@4000f000 {
+ compatible = "st,stm32h7-usart";
+ reg = <0x4000f000 0x400>;
+ clocks = <&rcc USART3_K>;
+ status = "disabled";
+ };
+
+ uart4: serial@40010000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40010000 0x400>;
+ clocks = <&rcc UART4_K>;
+ status = "disabled";
+ };
+
+ uart5: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ clocks = <&rcc UART5_K>;
+ status = "disabled";
+ };
+
+
+ uart7: serial@40018000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40018000 0x400>;
+ clocks = <&rcc UART7_K>;
+ status = "disabled";
+ };
+
+ uart8: serial@40019000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40019000 0x400>;
+ clocks = <&rcc UART8_K>;
+ status = "disabled";
+ };
+
+ usart6: serial@44003000 {
+ compatible = "st,stm32h7-usart";
+ reg = <0x44003000 0x400>;
+ clocks = <&rcc USART6_K>;
+ status = "disabled";
+ };
+
+ sdmmc3: sdmmc@48004000 {
+ compatible = "st,stm32-sdmmc2";
+ reg = <0x48004000 0x400>, <0x48005000 0x400>;
+ reg-names = "sdmmc", "delay";
+ clocks = <&rcc SDMMC3_K>;
+ resets = <&rcc SDMMC3_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ rcc: rcc@50000000 {
+ compatible = "syscon", "st,stm32mp1-rcc";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ reg = <0x50000000 0x1000>;
+ };
+
+ rcc_reboot: rcc-reboot@50000000 {
+ compatible = "syscon-reboot";
+ regmap = <&rcc>;
+ offset = <0x404>;
+ mask = <0x1>;
+ };
+
+ rng1: rng@54003000 {
+ compatible = "st,stm32-rng";
+ reg = <0x54003000 0x400>;
+ clocks = <&rcc RNG1_K>;
+ resets = <&rcc RNG1_R>;
+ status = "disabled";
+ };
+
+ fmc_nand: fmc_nand@58002000 {
+ compatible = "st,stm32mp1-fmc";
+ reg = <0x58002000 0x1000>,
+ <0x80000000 0x40000>,
+ <0x81000000 0x40000>,
+ <0x88000000 0x40000>,
+ <0x89000000 0x40000>;
+ clocks = <&rcc FMC_K>;
+ resets = <&rcc FMC_R>;
+ status = "disabled";
+ };
+
+ qspi: qspi@58003000 {
+ compatible = "st,stm32f469-qspi";
+ reg = <0x58003000 0x1000>, <0x70000000 0x10000000>;
+ clocks = <&rcc QSPI_K>;
+ status = "disabled";
+ };
+
+ sdmmc1: sdmmc@58005000 {
+ compatible = "st,stm32-sdmmc2";
+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
+ reg-names = "sdmmc", "delay";
+ clocks = <&rcc SDMMC1_K>;
+ resets = <&rcc SDMMC1_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ sdmmc2: sdmmc@58007000 {
+ compatible = "st,stm32-sdmmc2";
+ reg = <0x58007000 0x1000>, <0x58008000 0x1000>;
+ reg-names = "sdmmc", "delay";
+ clocks = <&rcc SDMMC2_K>;
+ resets = <&rcc SDMMC2_R>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <120000000>;
+ status = "disabled";
+ };
+
+ iwdg2: iwdg@5a002000 {
+ compatible = "st,stm32mp1-iwdg";
+ reg = <0x5a002000 0x400>;
+ clocks = <&rcc IWDG2>, <&rcc CK_LSI>;
+ clock-names = "pclk", "lsi";
+ status = "disabled";
+ };
+
+ usart1: serial@5c000000 {
+ compatible = "st,stm32h7-usart";
+ reg = <0x5c000000 0x400>;
+ clocks = <&rcc USART1_K>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c002000 0x400>;
+ clocks = <&rcc I2C4_K>;
+ resets = <&rcc I2C4_R>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ rtc: rtc@5c004000 {
+ compatible = "st,stm32mp1-rtc";
+ reg = <0x5c004000 0x400>;
+ clocks = <&rcc RTCAPB>, <&rcc RTC>;
+ clock-names = "pclk", "rtc_ck";
+ };
+ };
+};
--- /dev/null
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ */
+
+#include "stm32mp157-pinctrl.dtsi"
+/ {
+ soc {
+ pinctrl: pin-controller {
+ compatible = "st,stm32mp157caa-pinctrl";
+
+ gpioa: gpio@50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio@50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio@50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio@50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio@50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio@50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio@50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio@50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio@5000a000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio@5000b000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio@5000c000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+ };
+
+ pinctrl_z: pin-controller-z {
+ compatible = "st,stm32mp157caa-z-pinctrl";
+
+ gpioz: gpio@54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+ };
+ };
+};
--- /dev/null
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ */
+
+#ifndef _DT_BINDINGS_STM32_PINFUNC_H
+#define _DT_BINDINGS_STM32_PINFUNC_H
+
+/* define PIN modes */
+#define GPIO 0x0
+#define AF0 0x1
+#define AF1 0x2
+#define AF2 0x3
+#define AF3 0x4
+#define AF4 0x5
+#define AF5 0x6
+#define AF6 0x7
+#define AF7 0x8
+#define AF8 0x9
+#define AF9 0xa
+#define AF10 0xb
+#define AF11 0xc
+#define AF12 0xd
+#define AF13 0xe
+#define AF14 0xf
+#define AF15 0x10
+#define ANALOG 0x11
+
+/* define Pins number*/
+#define PIN_NO(port, line) (((port) - 'A') * 0x10 + (line))
+
+#define STM32_PINMUX(port, line, mode) (((PIN_NO(port, line)) << 8) | (mode))
+
+#endif /* _DT_BINDINGS_STM32_PINFUNC_H */
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 or BSD-3-Clause */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ */
+
+#ifndef _DT_BINDINGS_STM32MP1_RESET_H_
+#define _DT_BINDINGS_STM32MP1_RESET_H_
+
+#define LTDC_R 3072
+#define DSI_R 3076
+#define DDRPERFM_R 3080
+#define USBPHY_R 3088
+#define SPI6_R 3136
+#define I2C4_R 3138
+#define I2C6_R 3139
+#define USART1_R 3140
+#define STGEN_R 3156
+#define GPIOZ_R 3200
+#define CRYP1_R 3204
+#define HASH1_R 3205
+#define RNG1_R 3206
+#define AXIM_R 3216
+#define GPU_R 3269
+#define ETHMAC_R 3274
+#define FMC_R 3276
+#define QSPI_R 3278
+#define SDMMC1_R 3280
+#define SDMMC2_R 3281
+#define CRC1_R 3284
+#define USBH_R 3288
+#define MDMA_R 3328
+#define MCU_R 8225
+#define TIM2_R 19456
+#define TIM3_R 19457
+#define TIM4_R 19458
+#define TIM5_R 19459
+#define TIM6_R 19460
+#define TIM7_R 19461
+#define TIM12_R 16462
+#define TIM13_R 16463
+#define TIM14_R 16464
+#define LPTIM1_R 19465
+#define SPI2_R 19467
+#define SPI3_R 19468
+#define USART2_R 19470
+#define USART3_R 19471
+#define UART4_R 19472
+#define UART5_R 19473
+#define UART7_R 19474
+#define UART8_R 19475
+#define I2C1_R 19477
+#define I2C2_R 19478
+#define I2C3_R 19479
+#define I2C5_R 19480
+#define SPDIF_R 19482
+#define CEC_R 19483
+#define DAC12_R 19485
+#define MDIO_R 19847
+#define TIM1_R 19520
+#define TIM8_R 19521
+#define TIM15_R 19522
+#define TIM16_R 19523
+#define TIM17_R 19524
+#define SPI1_R 19528
+#define SPI4_R 19529
+#define SPI5_R 19530
+#define USART6_R 19533
+#define SAI1_R 19536
+#define SAI2_R 19537
+#define SAI3_R 19538
+#define DFSDM_R 19540
+#define FDCAN_R 19544
+#define LPTIM2_R 19584
+#define LPTIM3_R 19585
+#define LPTIM4_R 19586
+#define LPTIM5_R 19587
+#define SAI4_R 19592
+#define SYSCFG_R 19595
+#define VREF_R 19597
+#define TMPSENS_R 19600
+#define PMBCTRL_R 19601
+#define DMA1_R 19648
+#define DMA2_R 19649
+#define DMAMUX_R 19650
+#define ADC12_R 19653
+#define USBO_R 19656
+#define SDMMC3_R 19664
+#define CAMITF_R 19712
+#define CRYP2_R 19716
+#define HASH2_R 19717
+#define RNG2_R 19718
+#define CRC2_R 19719
+#define HSEM_R 19723
+#define MBOX_R 19724
+#define GPIOA_R 19776
+#define GPIOB_R 19777
+#define GPIOC_R 19778
+#define GPIOD_R 19779
+#define GPIOE_R 19780
+#define GPIOF_R 19781
+#define GPIOG_R 19782
+#define GPIOH_R 19783
+#define GPIOI_R 19784
+#define GPIOJ_R 19785
+#define GPIOK_R 19786
+
+#endif /* _DT_BINDINGS_STM32MP1_RESET_H_ */
projects / project / bcm63xx / atf.git / commitdiff