Mac80211 has formal infrastructure to specify which interface combinations
are supported. Make use of this facility in favor of open coding it
ourselves.
So far we only have to specify we can support multiple AP interfaces,
no other combinations are supported.
Inspired by an earlier patch from Paul Fertser.
Signed-off-by: Gertjan van Wingerde <[email protected]>
Cc: Paul Fertser <[email protected]>
Signed-off-by: John W. Linville <[email protected]>
CAPABILITY_VCO_RECALIBRATION,
};
+/*
+ * Interface combinations
+ */
+enum {
+ IF_COMB_AP = 0,
+ NUM_IF_COMB,
+};
+
/*
* rt2x00 device structure.
*/
unsigned int intf_associated;
unsigned int intf_beaconing;
+ /*
+ * Interface combinations
+ */
+ struct ieee80211_iface_limit if_limits_ap;
+ struct ieee80211_iface_combination if_combinations[NUM_IF_COMB];
+
/*
* Link quality
*/
rt2x00dev->intf_associated = 0;
}
+static inline void rt2x00lib_set_if_combinations(struct rt2x00_dev *rt2x00dev)
+{
+ struct ieee80211_iface_limit *if_limit;
+ struct ieee80211_iface_combination *if_combination;
+
+ /*
+ * Build up AP interface limits structure.
+ */
+ if_limit = &rt2x00dev->if_limits_ap;
+ if_limit->max = rt2x00dev->ops->max_ap_intf;
+ if_limit->types = BIT(NL80211_IFTYPE_AP);
+
+ /*
+ * Build up AP interface combinations structure.
+ */
+ if_combination = &rt2x00dev->if_combinations[IF_COMB_AP];
+ if_combination->limits = if_limit;
+ if_combination->n_limits = 1;
+ if_combination->max_interfaces = if_limit->max;
+ if_combination->num_different_channels = 1;
+
+ /*
+ * Finally, specify the possible combinations to mac80211.
+ */
+ rt2x00dev->hw->wiphy->iface_combinations = rt2x00dev->if_combinations;
+ rt2x00dev->hw->wiphy->n_iface_combinations = 1;
+}
+
/*
* driver allocation handlers.
*/
{
int retval = -ENOMEM;
+ /*
+ * Set possible interface combinations.
+ */
+ rt2x00lib_set_if_combinations(rt2x00dev);
+
/*
* Allocate the driver data memory, if necessary.
*/
!test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
return -ENODEV;
- switch (vif->type) {
- case NL80211_IFTYPE_AP:
- /*
- * We don't support mixed combinations of
- * sta and ap interfaces.
- */
- if (rt2x00dev->intf_sta_count)
- return -ENOBUFS;
-
- /*
- * Check if we exceeded the maximum amount
- * of supported interfaces.
- */
- if (rt2x00dev->intf_ap_count >= rt2x00dev->ops->max_ap_intf)
- return -ENOBUFS;
-
- break;
- case NL80211_IFTYPE_STATION:
- case NL80211_IFTYPE_ADHOC:
- case NL80211_IFTYPE_MESH_POINT:
- case NL80211_IFTYPE_WDS:
- /*
- * We don't support mixed combinations of
- * sta and ap interfaces.
- */
- if (rt2x00dev->intf_ap_count)
- return -ENOBUFS;
-
- /*
- * We don't support multiple STA interfaces.
- */
- if (rt2x00dev->intf_sta_count)
- return -ENOBUFS;
-
- break;
- default:
- return -EINVAL;
- }
-
/*
* Loop through all beacon queues to find a free
* entry. Since there are as much beacon entries