Specifications:
* AR9342, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R, 2.4 GHz
* AR9382 PCIe card, 802.11n 2T2R, 5 GHz
* 1x Gigabit Ethernet (AR8035), 802.3af PoE
Installation:
* OEM Web UI is at 192.168.1.2
login as `admin` with password `1234`
* Flash factory-AAEO.bin
The string `AAEO` needs to be present within the file name of the uploaded
image to be accepted by the OEM Web-based updater, the factory image is
named accordingly to save the user from the hassle of manual renaming.
TFTP Recovery:
* Open the case, connect to TTL UART port (this is the official method
described by Zyxel, the reset button is useless during power-on)
* Extract factory image (.tar.bz2), serve `vmlinux_mi124_f1e.lzma.uImage`
and `mi124_f1e-jffs2` via tftp at 192.168.1.10
* Interrupt uboot countdown, execute commands
`run lk`
`run lf`
to flash the kernel / filesystem accordingly
MAC addresses as verified by OEM firmware:
use address source
LAN *:fb mib0 0x30 ('eth0mac'), art 0x1002 (label)
2g *:fc mib0 0x4b ('wifi0mac')
5g *:fd mib0 0x66 ('wifi1mac')
Signed-off-by: Sebastian Schaper <[email protected]>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "ar9342_zyxel_nwa11xx.dtsi"
+
+/ {
+ compatible = "zyxel,nwa1123-ni", "qca,ar9342";
+ model = "Zyxel NWA1123-NI";
+
+ aliases {
+ label-mac-device = ð0;
+ led-boot = &led_status_green;
+ led-failsafe = &led_status_amber;
+ led-running = &led_status_green;
+ led-upgrade = &led_status_amber;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_green: status_green {
+ label = "green:status";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ led_status_amber: status_amber {
+ label = "amber:status";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
ubnt,unifi|\
wd,mynet-wifi-rangeextender|\
winchannel,wb2000|\
- zyxel,nwa1121-ni)
+ zyxel,nwa1121-ni|\
+ zyxel,nwa1123-ni)
ucidef_set_interface_lan "eth0"
;;
airtight,c-75)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress
;;
+ zyxel,nwa1123-ni)
+ [ "$PHYNBR" -eq 1 ] && \
+ mtd_get_mac_text mib0 0x66 > /sys${DEVPATH}/macaddress
+ ;;
esac
endef
TARGET_DEVICES += zyxel_nwa1121-ni
+define Device/zyxel_nwa1123-ni
+ $(Device/zyxel_nwa11xx)
+ DEVICE_MODEL := NWA1123
+ DEVICE_VARIANT := NI
+ ZYXEL_MODEL_STRING := AAEO
+endef
+TARGET_DEVICES += zyxel_nwa1123-ni
+
define Device/zyxel_nbg6616
SOC := qca9557
DEVICE_VENDOR := ZyXEL