USB: otg/ulpi: add support for SMSC USB3319 ulpi phy

Signed-off-by: Igor Grinberg <[email protected]>
Signed-off-by: Mike Rapoport <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 3d2d3e549bd18cbe8392b72b212209e79c8a1b7f..3b1289572d72ebee6248cd05d463f01961265e4e 100644 (file)
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -49,8 +49,6 @@ config USB_ULPI
          Enable this to support ULPI connected USB OTG transceivers which
          are likely found on embedded boards.
 
-         The only chip currently supported is NXP's ISP1504
-
 config TWL4030_USB
        tristate "TWL4030 USB Transceiver Driver"
        depends on TWL4030_CORE && REGULATOR_TWL4030

diff --git a/drivers/usb/otg/ulpi.c b/drivers/usb/otg/ulpi.c
index 448d643e72723b85fcdacf6ed6802738ee810e38..ef7dbe40f1114fa991f40ed9f1a7c27b2d9b29b6 100644 (file)
--- a/drivers/usb/otg/ulpi.c
+++ b/drivers/usb/otg/ulpi.c
@@ -34,6 +34,7 @@
 /* ULPI hardcoded IDs, used for probing */
 static unsigned int ulpi_ids[] = {
        ULPI_ID(0x04cc, 0x1504),        /* NXP ISP1504 */
+       ULPI_ID(0x0424, 0x0006),        /* SMSC USB3319 */
 };
 
 static int ulpi_set_flags(struct otg_transceiver *otg)