kernel: move accepted patch from pending-6.6 to backport-6.6

792-igc-enable-HW-vlan-tag-insertion-stripping-by-defaul.patch has been
accepted for Linux 6.16.

Signed-off-by: Rui Salvaterra <[email protected]>

diff --git a/target/linux/generic/backport-6.6/792-v6.16-igc-enable-HW-vlan-tag-insertion-stripping-by-defaul.patch b/target/linux/generic/backport-6.6/792-v6.16-igc-enable-HW-vlan-tag-insertion-stripping-by-defaul.patch
new file mode 100644 (file)
index 0000000..0ca2194
--- /dev/null
+++ b/target/linux/generic/backport-6.6/792-v6.16-igc-enable-HW-vlan-tag-insertion-stripping-by-defaul.patch
@@ -0,0 +1,32 @@
+From 8cae5a0d91fea01d90ce7c1827e26934a22ca2fa Mon Sep 17 00:00:00 2001
+From: Rui Salvaterra <[email protected]>
+Date: Wed, 5 Mar 2025 11:53:56 +0000
+Subject: [PATCH] igc: enable HW vlan tag insertion/stripping by default
+
+This is enabled by default in other Intel drivers I've checked (e1000, e1000e,
+iavf, igb and ice). Fixes an out-of-the-box performance issue when running
+OpenWrt on typical mini-PCs with igc-supported Ethernet controllers and 802.1Q
+VLAN configurations, as ethtool isn't part of the default packages and sane
+defaults are expected.
+
+In my specific case, with an Intel N100-based machine with four I226-V Ethernet
+controllers, my upload performance increased from under 30 Mb/s to the expected
+~1 Gb/s.
+
+Signed-off-by: Rui Salvaterra <[email protected]>
+---
+ drivers/net/ethernet/intel/igc/igc_main.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/drivers/net/ethernet/intel/igc/igc_main.c
++++ b/drivers/net/ethernet/intel/igc/igc_main.c
+@@ -6850,6 +6850,9 @@ static int igc_probe(struct pci_dev *pde
+       netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
+                              NETDEV_XDP_ACT_XSK_ZEROCOPY;
+ 
++      /* enable HW vlan tag insertion/stripping by default */
++      netdev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
++
+       /* MTU range: 68 - 9216 */
+       netdev->min_mtu = ETH_MIN_MTU;
+       netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE;

diff --git a/target/linux/generic/pending-6.6/792-igc-enable-HW-vlan-tag-insertion-stripping-by-defaul.patch b/target/linux/generic/pending-6.6/792-igc-enable-HW-vlan-tag-insertion-stripping-by-defaul.patch
deleted file mode 100644 (file)
index 0ca2194..0000000
--- a/target/linux/generic/pending-6.6/792-igc-enable-HW-vlan-tag-insertion-stripping-by-defaul.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From 8cae5a0d91fea01d90ce7c1827e26934a22ca2fa Mon Sep 17 00:00:00 2001
-From: Rui Salvaterra <[email protected]>
-Date: Wed, 5 Mar 2025 11:53:56 +0000
-Subject: [PATCH] igc: enable HW vlan tag insertion/stripping by default
-
-This is enabled by default in other Intel drivers I've checked (e1000, e1000e,
-iavf, igb and ice). Fixes an out-of-the-box performance issue when running
-OpenWrt on typical mini-PCs with igc-supported Ethernet controllers and 802.1Q
-VLAN configurations, as ethtool isn't part of the default packages and sane
-defaults are expected.
-
-In my specific case, with an Intel N100-based machine with four I226-V Ethernet
-controllers, my upload performance increased from under 30 Mb/s to the expected
-~1 Gb/s.
-
-Signed-off-by: Rui Salvaterra <[email protected]>
----
- drivers/net/ethernet/intel/igc/igc_main.c | 3 +++
- 1 file changed, 3 insertions(+)
-
---- a/drivers/net/ethernet/intel/igc/igc_main.c
-+++ b/drivers/net/ethernet/intel/igc/igc_main.c
-@@ -6850,6 +6850,9 @@ static int igc_probe(struct pci_dev *pde
-       netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
-                              NETDEV_XDP_ACT_XSK_ZEROCOPY;
- 
-+      /* enable HW vlan tag insertion/stripping by default */
-+      netdev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
-+
-       /* MTU range: 68 - 9216 */
-       netdev->min_mtu = ETH_MIN_MTU;
-       netdev->max_mtu = MAX_STD_JUMBO_FRAME_SIZE;