mqttled: remove package

Development of this package is stalled [1],
it uses python3-netifaces [2], but that repository
was archived in 20211 [3], because there does not
seems to be replacement according to this issue:
https://github.com/trevortrevor/mqttled/issues/3

Let's remove it.

[1] https://github.com/trevortrevor/mqttled/
[2] https://github.com/trevortrevor/mqttled/issues/3
[3] https://github.com/al45tair/netifaces

Signed-off-by: Josef Schlehofer <[email protected]>

diff --git a/utils/mqttled/Makefile b/utils/mqttled/Makefile
deleted file mode 100644 (file)
index 41bd9ac..0000000
--- a/utils/mqttled/Makefile
+++ /dev/null
@@ -1,58 +0,0 @@
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=mqttled
-PKG_VERSION:=0.1.2
-PKG_RELEASE:=1
-
-PYPI_NAME:=mqttled
-PKG_HASH:=eb94af853605f4f1ea3c34b66e2f84f3d9845d795529ae8429feb954e74876d7
-
-PKG_MAINTAINER:=Tom Grime <[email protected]>
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENCE
-
-include ../../lang/python/pypi.mk
-include $(INCLUDE_DIR)/package.mk
-include ../../lang/python/python3-package.mk
-
-define Package/mqttled
-  SECTION:=utils
-  CATEGORY:=Utilities
-  TITLE:=LED Control from MQTT 
-  URL:=https://github.com/trevortrevor/mqttled/
-  DEPENDS:= \
-    +python3-paho-mqtt \
-       +python3-uci \
-       +python3-idna \
-       +python3-jsonpath-ng \
-       +python3-yaml \
-       +python3-schema \
-       +python3-netifaces \
-       +python3-logging \
-       +python3-urllib \
-       +python3-asyncio \
-       +python3-pkg-resources
-
-endef
-
-define Package/mqttled/description
-       Exposes the LEDs of your device to an MQTT broker with optional Home Assistant auto discovery
-endef
-
-define Py3Package/mqttled/install
-       $(INSTALL_DIR) $(1)/usr/bin
-       $(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/mqttled $(1)/usr/bin/
-
-       $(INSTALL_DIR) $(1)/etc/init.d
-       $(INSTALL_BIN) ./files/mqttled.init $(1)/etc/init.d/mqttled
-       $(INSTALL_DIR) $(1)/etc/config
-       $(INSTALL_DATA) ./files/mqttled.config $(1)/etc/config/mqttled
-endef
-
-define Package/mqttled/conffiles
-/etc/config/mqttled
-endef
-
-$(eval $(call Py3Package,mqttled))
-$(eval $(call BuildPackage,mqttled))

diff --git a/utils/mqttled/files/mqttled.config b/utils/mqttled/files/mqttled.config
deleted file mode 100644 (file)
index 344dad6..0000000
--- a/utils/mqttled/files/mqttled.config
+++ /dev/null
@@ -1,44 +0,0 @@
-config mqtt 'mqtt'
-    #MQTT Broker Address
-    option host '192.168.1.1'
-    option port '1883'
-    #May work without this, should bind to all interfaces. Needs to be an interface matching in /etc/config/network
-    option interface 'lan'
-    option username ''
-    option password ''
-    #Not tested
-    option tls '0'
-    option cert ''
-    option discovery 'homeassistant'
-    #Set your topic here: e.g. OpenWRTleds/CustomDevice/led1
-    option basetopic 'OpenWRTleds'
-    option subtopic 'CustomDevice'
-    #Reported in the 'device' page in Home Assistant
-    option model 'OpenWRT Device'
-
-config leds 'leds'
-    #Setting this to 1 will ignore any includes
-    option includeall '1'
-    #excluded LEDs will allways be supressed
-    list exclude 'mt76-phy0'
-    list exclude 'rt2800soc-phy1::assoc'
-    list exclude 'rt2800soc-phy1::quality'
-    list exclude 'rt2800soc-phy1::radio'
-    #list include 'blue:internet'
-
-config rgb 'rgb'
-    # Exposes 3 LEDs to HomeAssistant as a single RGB LED
-    option enablergb '0'
-    # The name of the RGB LED to expose to HomeAssistant
-    option name 'RGB'
-    # The IDs of the three colored LEDs
-    option red 'LED0_Red'
-    option green 'LED0_Green'
-    option blue 'LED0_Blue'
-
-config trigger 'triggers'
-    #Only triggers listed here will be presented to HA as 'effects'
-    list triggers 'none'
-    list triggers 'default-on'
-    list triggers 'heartbeat'
-    list triggers 'timer'

diff --git a/utils/mqttled/files/mqttled.init b/utils/mqttled/files/mqttled.init
deleted file mode 100644 (file)
index 3b785bb..0000000
--- a/utils/mqttled/files/mqttled.init
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-STOP=99
-
-USE_PROCD=1
-
-PROG=/usr/bin/mqttled
-
-start_service() {
-       procd_open_instance
-       procd_set_param command "$PROG"
-       procd_set_param stdout 1
-       procd_set_param stderr 1
-       procd_close_instance
-}