usb: musb: gadget: enable autoclear for OUT transfer in both DMA 0 and DMA 1

This patch fixes one bugs of OUT transfer in double buffer case:

	-the current code only enable autoclear for dma mode 1, and not
	for dma mode 0

Without this patch, test #5 of usbtest can't be passed if we
configure musb as g_zero and use fifo mode 3 to enable double
buffer mode.

With this patch and the following patch(fix dma length),
on my beagle B5, test#5(queued bulk out) may go beyond
18Mbyte/s(seems dma mode 0 is quicker in double buffer case)
if musb is configured as g_zero and fifo mode 3 is taken, follows
the test command:

    #./testusb -D DEV_NAME -c 1024 -t 5 -s 32768 -g 8   [1]

Also I have tested this patch can't make g_ether broken.

[1],source of testusb : tools/usb/testusb.c under linux kernel;

Signed-off-by: Ming Lei <[email protected]>
Cc: David Brownell <[email protected]>
Cc: Anand Gadiyar <[email protected]>
Cc: Mike Frysinger <[email protected]>
Cc: Sergei Shtylyov <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index f206c94b8b1c197f541ea538269805dbb9acb000..176e1276dc28addb982a6d9a4ad65b12c049ca29 100644 (file)
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -643,8 +643,8 @@ static void rxstate(struct musb *musb, struct musb_request *req)
         */
 
                                csr |= MUSB_RXCSR_DMAENAB;
-#ifdef USE_MODE1
                                csr |= MUSB_RXCSR_AUTOCLEAR;
+#ifdef USE_MODE1
                                /* csr |= MUSB_RXCSR_DMAMODE; */
 
                                /* this special sequence (enabling and then