PCI: rcar: Shut the PHY down in failpath

If anything fails past phy_init_fn() and the system is a Gen3 with
a PHY, the PHY will be left on and inited. This is caused by the
phy_init_fn, which is in fact a pointer to rcar_pcie_phy_init_gen3()
function, which starts the PHY, yet has no counterpart in the failpath.
Add that counterpart.

Fixes: 517ca93a7159 ("PCI: rcar: Add R-Car gen3 PHY support")
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Simon Horman <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Phil Edworthy <[email protected]>
Cc: Wolfram Sang <[email protected]>

diff --git a/drivers/pci/controller/pcie-rcar.c b/drivers/pci/controller/pcie-rcar.c
index 874d75c9ee4ac44513f584267272253d4cf84e7d..8b0d3206cbc405087d51e3974055a2743e382a66 100644 (file)
--- a/drivers/pci/controller/pcie-rcar.c
+++ b/drivers/pci/controller/pcie-rcar.c
@@ -1165,7 +1165,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
        if (rcar_pcie_hw_init(pcie)) {
                dev_info(dev, "PCIe link down\n");
                err = -ENODEV;
-               goto err_clk_disable;
+               goto err_phy_shutdown;
        }
 
        data = rcar_pci_read_reg(pcie, MACSR);
@@ -1177,7 +1177,7 @@ static int rcar_pcie_probe(struct platform_device *pdev)
                        dev_err(dev,
                                "failed to enable MSI support: %d\n",
                                err);
-                       goto err_clk_disable;
+                       goto err_phy_shutdown;
                }
        }
 
@@ -1191,6 +1191,12 @@ err_msi_teardown:
        if (IS_ENABLED(CONFIG_PCI_MSI))
                rcar_pcie_teardown_msi(pcie);
 
+err_phy_shutdown:
+       if (pcie->phy) {
+               phy_power_off(pcie->phy);
+               phy_exit(pcie->phy);
+       }
+
 err_clk_disable:
        clk_disable_unprepare(pcie->bus_clk);