ixgbe: Always turn PHY power on when requested

Instead of inhibiting PHY power control when manageability is
present, only inhibit turning PHY power off when manageability
is present. Consequently, PHY power will always be turned on when
requested. Without this patch, some systems with X540 or X550
devices in some conditions will never get link.

Signed-off-by: Mark Rustad <[email protected]>
Tested-by: Phil Schmitt <[email protected]>
Signed-off-by: Jeff Kirsher <[email protected]>

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
index fb8673d6380689fa7a79ebba5d5d493777d1bdc2..db0731e05401e4f9290478297a5b9b709419110e 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c
@@ -2393,6 +2393,9 @@ s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
        if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
                return 0;
 
+       if (!on && ixgbe_mng_present(hw))
+               return 0;
+
        status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
                                      IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
                                      &reg);

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
index b9e9b0c173988c544841f4b6a04f0104098f0ad0..bf8225ceab8e4ff74ef102bf10379bc088807b2e 100644 (file)
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c
@@ -57,8 +57,7 @@ s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
        struct ixgbe_phy_info *phy = &hw->phy;
 
        /* set_phy_power was set by default to NULL */
-       if (!ixgbe_mng_present(hw))
-               phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
+       phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
 
        mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
        mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;