ipq40xx: use PHY to control USB GPIO

Instead of using regulator-output to manually control USB GPIO, let the
PHY handle it.

Signed-off-by: Rosen Penev <[email protected]>
Link: https://github.com/openwrt/openwrt/pull/17221
Signed-off-by: John Crispin <[email protected]>

diff --git a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wia3300-20.dts b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wia3300-20.dts
index 644329419d97a95b4d7f5da10735c2c81e70b0a4..85ad382223df53a723dd33ca651030e6c606977e 100644 (file)
--- a/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wia3300-20.dts
+++ b/target/linux/ipq40xx/files-6.6/arch/arm/boot/dts/qcom/qcom-ipq4019-wia3300-20.dts
@@ -68,11 +68,6 @@
                };
        };
 
-       output-usb-power {
-               compatible = "regulator-output";
-               vout-supply = <&reg_usb>;
-       };
-
        reg_usb: regulator-usb {
                compatible = "regulator-fixed";
 
@@ -419,6 +414,8 @@
 
 &usb2_hs_phy {
        status = "okay";
+
+       phy-supply = <&reg_usb>;
 };
 
 &watchdog {

diff --git a/target/linux/ipq40xx/generic/config-default b/target/linux/ipq40xx/generic/config-default
index 4999ad36223cb14cda762d99aca93fa1821c0614..bd9876a0b64f9f17b238efc4ba90e9283dae887e 100644 (file)
--- a/target/linux/ipq40xx/generic/config-default
+++ b/target/linux/ipq40xx/generic/config-default
@@ -3,5 +3,4 @@ CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y
 CONFIG_MTD_UBI_NVMEM=y
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
 CONFIG_UBIFS_FS=y