gpio: Add DT bindings for Gateworks PLD GPIO

This adds device tree bindings for the Gateworks PLD
GPIO chip, a simple I2C GPIO controller.

Cc: [email protected]
Cc: Imre Kaloz <[email protected]>
Cc: Tim Harvey <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>

diff --git a/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
new file mode 100644 (file)
index 0000000..6e81f8b
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gateworks,pld-gpio.txt
@@ -0,0 +1,20 @@
+Gateworks PLD GPIO controller bindings
+
+The GPIO controller should be a child node on an I2C bus,
+see: i2c/i2c.txt for details.
+
+Required properties:
+- compatible: Should be "gateworks,pld-gpio"
+- reg: I2C slave address
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be <2>. The first cell is the gpio number and
+  the second cell is used to specify optional parameters.
+
+Example:
+
+pld@56 {
+       compatible = "gateworks,pld-gpio";
+       reg = <0x56>;
+       gpio-controller;
+       #gpio-cells = <2>;
+};