ramips: add support for ELECOM WRC-2533GS2

ELECOM WRC-2533GS2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.

Specification:

- SoC		: MediaTek MT7621A
- RAM		: DDR3 128 MiB (NT5CC64M16GP-DI)
- Flash		: SPI-NOR 16 MiB (MX25L12835FM2I-10G)
- WLAN		: 2.4/5GHz 4T4R (2x MediaTek MT7615)
- Ethernet	: 10/100/1000 Mbps x5
  - Switch	: MediaTek MT7530 (SoC)
- LEDs/Keys	: 4x/6x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J4: 3.3V, GND, TX, RX from ethernet port side
  - 57600n8
- Power		: 12 VDC, 1.5 A

Flash instruction using factory image:

1. Boot WRC-2533GS2 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

MAC Addresses:

LAN	: 04:AB:18:xx:xx:FB (Factory, 0xFFF4 (hex))
WAN	: 04:AB:18:xx:xx:FC (Factory, 0xFFFA (hex))
2.4 GHz	: 04:AB:18:xx:xx:FD (Factory, 0x4    (hex))
5 GHz	: 04:AB:18:xx:xx:FE (Factory, 0x8004 (hex))

Signed-off-by: INAGAKI Hiroshi <[email protected]>

diff --git a/target/linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts b/target/linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts
new file mode 100644 (file)
index 0000000..0036b52
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_elecom_wrc-2533gs2.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_elecom_wrc-gs-2pci.dtsi"
+
+/ {
+       compatible = "elecom,wrc-2533gs2", "mediatek,mt7621-soc";
+       model = "ELECOM WRC-2533GS2";
+};
+
+&partitions {
+       partition@50000 {
+               compatible = "denx,uimage";
+               label = "firmware";
+               reg = <0x50000 0xb00000>;
+       };
+
+       partition@b50000 {
+               label = "tm_pattern";
+               reg = <0xb50000 0x380000>;
+               read-only;
+       };
+
+       partition@ed0000 {
+               label = "tm_key";
+               reg = <0xed0000 0x80000>;
+               read-only;
+       };
+
+       partition@f50000 {
+               label = "nvram";
+               reg = <0xf50000 0x30000>;
+               read-only;
+       };
+
+       partition@f80000 {
+               label = "user_data";
+               reg = <0xf80000 0x80000>;
+               read-only;
+       };
+};
+
+&gmac0 {
+       nvmem-cells = <&macaddr_factory_fff4>;
+       nvmem-cell-names = "mac-address";
+};
+
+&wan {
+       nvmem-cells = <&macaddr_factory_fffa>;
+       nvmem-cell-names = "mac-address";
+};
+
+&factory {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_factory_fff4: macaddr@fff4 {
+               reg = <0xfff4 0x6>;
+       };
+
+       macaddr_factory_fffa: macaddr@fffa {
+               reg = <0xfffa 0x6>;
+       };
+};

diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 105f1f5b188f3f9319402674b990379d2a87b1e9..8e13920672386a0e94b4ee405f3e75d79c41d108 100644 (file)
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -549,6 +549,14 @@ define Device/elecom_wrc-2533ghbk-i
 endef
 TARGET_DEVICES += elecom_wrc-2533ghbk-i
 
+define Device/elecom_wrc-2533gs2
+  $(Device/elecom_wrc-gs)
+  IMAGE_SIZE := 11264k
+  DEVICE_MODEL := WRC-2533GS2
+  ELECOM_HWNAME := WRC-2533GS2
+endef
+TARGET_DEVICES += elecom_wrc-2533gs2
+
 define Device/elecom_wrc-2533gst
   $(Device/elecom_wrc-gs)
   IMAGE_SIZE := 11264k