[ Note, this is a Git cherry-pick of the following commit:
a47ba4d77e12 ("perf/x86: Enable free running PEBS for REGS_USER/INTR")
... for easier x86 PTI code testing and back-porting. ]
Currently free running PEBS is disabled when user or interrupt
registers are requested. Most of the registers are actually
available in the PEBS record and can be supported.
So we just need to check for the supported registers and then
allow it: it is all except for the segment register.
For user registers this only works when the counter is limited
to ring 3 only, so this also needs to be checked.
Signed-off-by: Andi Kleen <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
if (event->attr.use_clockid)
flags &= ~PERF_SAMPLE_TIME;
+ if (!event->attr.exclude_kernel)
+ flags &= ~PERF_SAMPLE_REGS_USER;
+ if (event->attr.sample_regs_user & ~PEBS_REGS)
+ flags &= ~(PERF_SAMPLE_REGS_USER | PERF_SAMPLE_REGS_INTR);
return flags;
}
* Flags PEBS can handle without an PMI.
*
* TID can only be handled by flushing at context switch.
+ * REGS_USER can be handled for events limited to ring 3.
*
*/
#define PEBS_FREERUNNING_FLAGS \
(PERF_SAMPLE_IP | PERF_SAMPLE_TID | PERF_SAMPLE_ADDR | \
PERF_SAMPLE_ID | PERF_SAMPLE_CPU | PERF_SAMPLE_STREAM_ID | \
PERF_SAMPLE_DATA_SRC | PERF_SAMPLE_IDENTIFIER | \
- PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR)
+ PERF_SAMPLE_TRANSACTION | PERF_SAMPLE_PHYS_ADDR | \
+ PERF_SAMPLE_REGS_INTR | PERF_SAMPLE_REGS_USER)
/*
* A debug store configuration.
u64 pebs_event_reset[MAX_PEBS_EVENTS];
};
+#define PEBS_REGS \
+ (PERF_REG_X86_AX | \
+ PERF_REG_X86_BX | \
+ PERF_REG_X86_CX | \
+ PERF_REG_X86_DX | \
+ PERF_REG_X86_DI | \
+ PERF_REG_X86_SI | \
+ PERF_REG_X86_SP | \
+ PERF_REG_X86_BP | \
+ PERF_REG_X86_IP | \
+ PERF_REG_X86_FLAGS | \
+ PERF_REG_X86_R8 | \
+ PERF_REG_X86_R9 | \
+ PERF_REG_X86_R10 | \
+ PERF_REG_X86_R11 | \
+ PERF_REG_X86_R12 | \
+ PERF_REG_X86_R13 | \
+ PERF_REG_X86_R14 | \
+ PERF_REG_X86_R15)
+
/*
* Per register state.
*/