Module parameters used to be defined in both iwl-5000.c and iwl-4965.c,
after the code re-structure, merge into iwl-agn.c for easy to read and
maintenance.
Number of module parameters are deprecated after this merge. These are also
scheduled for removal by 2.6.40.
The current supported parameters are:
parm: debug50:50XX debug output mask (deprecated) (uint)
parm: debug:debug output mask (uint)
parm: swcrypto50:using crypto in software (default 0 [hardware])
(deprecated) (bool)
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: queues_num50:number of hw queues in 50xx series (deprecated)
(int)
parm: queues_num:number of hw queues. (int)
parm: 11n_disable50:disable 50XX 11n functionality (deprecated) (int)
parm: 11n_disable:disable 11n functionality (int)
parm: amsdu_size_8K50:enable 8K amsdu size in 50XX series (deprecated)
(int)
parm: amsdu_size_8K:enable 8K amsdu size (int)
parm: fw_restart50:restart firmware in case of error (deprecated) (int)
parm: fw_restart:restart firmware in case of error (int)
parm: disable_hw_scan:disable hardware scanning (default 0) (int)
Remove "antenna" module parameter, it is not being used in "agn" driver.
Signed-off-by: Wey-Yi Guy <[email protected]>
Signed-off-by: Reinette Chatre <[email protected]>
NCCI TTY device nodes. User space (pppdcapiplugin) works without
noticing the difference.
+
+----------------------------
+
+What: iwlwifi 50XX module parameters
+When: 2.6.40
+Why: The "..50" modules parameters were used to configure 5000 series and
+ up devices; different set of module parameters also available for 4965
+ with same functionalities. Consolidate both set into single place
+ in drivers/net/wireless/iwlwifi/iwl-agn.c
+
#define _IWL4965_MODULE_FIRMWARE(api) IWL4965_FW_PRE #api ".ucode"
#define IWL4965_MODULE_FIRMWARE(api) _IWL4965_MODULE_FIRMWARE(api)
-
-/* module parameters */
-static struct iwl_mod_params iwl4965_mod_params = {
- .amsdu_size_8K = 1,
- .restart_fw = 1,
- /* the rest are 0 by default */
-};
-
/* check contents of special bootstrap uCode SRAM */
static int iwl4965_verify_bsm(struct iwl_priv *priv)
{
.ops = &iwl4965_ops,
.num_of_queues = IWL49_NUM_QUEUES,
.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
- .mod_params = &iwl4965_mod_params,
+ .mod_params = &iwlagn_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_ABC,
.pll_cfg_val = 0,
/* Module firmware */
MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
-module_param_named(antenna, iwl4965_mod_params.antenna, int, S_IRUGO);
-MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(
- disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
-
-module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, S_IRUGO);
-MODULE_PARM_DESC(queues_num, "number of hw queues.");
-/* 11n */
-module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, S_IRUGO);
-MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
-module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K,
- int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
-
-module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");
MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));
-
-module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
-MODULE_PARM_DESC(swcrypto50,
- "using software crypto engine (default 0 [hardware])\n");
-module_param_named(queues_num50, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
-MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series");
-module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
-MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality");
-module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
- int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series");
-module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart50, "restart firmware in case of error");
MODULE_PARM_DESC(debug, "debug output mask");
#endif
+module_param_named(swcrypto50, iwlagn_mod_params.sw_crypto, bool, S_IRUGO);
+MODULE_PARM_DESC(swcrypto50,
+ "using crypto in software (default 0 [hardware]) (deprecated)");
+module_param_named(swcrypto, iwlagn_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
+module_param_named(queues_num50,
+ iwlagn_mod_params.num_of_queues, int, S_IRUGO);
+MODULE_PARM_DESC(queues_num50,
+ "number of hw queues in 50xx series (deprecated)");
+module_param_named(queues_num, iwlagn_mod_params.num_of_queues, int, S_IRUGO);
+MODULE_PARM_DESC(queues_num, "number of hw queues.");
+module_param_named(11n_disable50, iwlagn_mod_params.disable_11n, int, S_IRUGO);
+MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality (deprecated)");
+module_param_named(11n_disable, iwlagn_mod_params.disable_11n, int, S_IRUGO);
+MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
+module_param_named(amsdu_size_8K50, iwlagn_mod_params.amsdu_size_8K,
+ int, S_IRUGO);
+MODULE_PARM_DESC(amsdu_size_8K50,
+ "enable 8K amsdu size in 50XX series (deprecated)");
+module_param_named(amsdu_size_8K, iwlagn_mod_params.amsdu_size_8K,
+ int, S_IRUGO);
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+module_param_named(fw_restart50, iwlagn_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart50,
+ "restart firmware in case of error (deprecated)");
+module_param_named(fw_restart, iwlagn_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
+module_param_named(
+ disable_hw_scan, iwlagn_mod_params.disable_hw_scan, int, S_IRUGO);
+MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");