serial: don't optimise away baud rate changes when BOTHER is used

The uart_set_termios() function will bail out early without bothering to
touch the hardware, if it decides that nothing "relevant" has changed.
Unfortunately, its idea of "relevant" doesn't include c_[io]speed.  So if
the baud rate bits are BOTHER and you just change the speed, the change
gets optimised away.

This patch makes it ignore the old Bfoo bits in c_cflag and just check
whether c_ispeed and c_ospeed have changed.  Those integers are always set
appropriately for us by set_termios().

Signed-off-by: David Woodhouse <[email protected]>
Acked-by: Alan Cox <[email protected]>
Cc: Russell King <[email protected]>
Cc: Mariusz Kozlowski <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 030a6063541dc36466b15cec3bc1005cbed30809..a055f58f342f3a1570f8648eb35c4df8550be353 100644 (file)
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1146,11 +1146,14 @@ static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termio
 
        /*
         * These are the bits that are used to setup various
-        * flags in the low level driver.
+        * flags in the low level driver. We can ignore the Bfoo
+        * bits in c_cflag; c_[io]speed will always be set
+        * appropriately by set_termios() in tty_ioctl.c
         */
 #define RELEVANT_IFLAG(iflag)  ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
        if ((cflag ^ old_termios->c_cflag) == 0 &&
+           tty->termios->c_ospeed == old_termios->c_ospeed &&
+           tty->termios->c_ispeed == old_termios->c_ispeed &&
            RELEVANT_IFLAG(tty->termios->c_iflag ^ old_termios->c_iflag) == 0)
                return;